KW-triO 13020 Rotary Paper Trimmer Instruction Manual

KW-triO 13020 Rotary Paper Trimmer

Product Information

The product is a rotary trimmer used for trimming paper. It consists of various components including a replacement cutter, Allen wrench, bar, inside washer, blade guard, rotary blade head, clamp bar, paper guide, measuring scale, and a hand crank. The product is intended for indoor use only.

Replacement Cutter:

To replace the cutter set, follow these steps:

1. Use the provided Allen wrench to remove the screws.
2. Carefully remove the cutter set.
3. Carefully slide the new cutter set onto the bar.
4. Use the Allen wrench to tighten the bar in place.
5. Make sure to set the inside washer well.

Product Usage Instructions

Before using the product, read, understand, and follow these instructions. Save these instructions for future reference.

Important Safeguards:

• Read all the instructions before using the product.
• This product is not intended for use by children. Keep product out of the reach of children and pets.
• This product is intended for trimming paper only. Do not use it for any other purposes.
• Keep all loose items (e.g. jewelry, clothing, neckties, etc.) away from the blade to avoid injury or damage.

To Avoid Damaging the Product:

• Remove paper clips and staples from items before trimming the paper.
• Never lubricate the cutting blade.
• Do not expose the product to water or other liquids.

To Avoid Possible Severe Injury:

• Never operate the trimmer without the blade guard in place.
• Never carry the trimmer by the blade or rotary blade handle.
• Do not attempt to dislodge jammed debris by using a pointed object, as it may cause injury or product damage.
• Always operate the product on a flat, level, steady surface to avoid overturning.
• Do not hang the product on the wall. It is intended for indoor use only.
• Do not use or leave this product outdoors.

How to Use

1. Place the paper guide as shown in the picture.
2. Press and lock the paper guide in place.
3. To avoid breaking the paper guide, do not lift it vertically from the end.
4. Put the paper under the clamp bar.
5. Adjust the paper guide to a proper position.
6. Press and slide the rotary blade head forward or backward to cut through the paper.

Alternative Cutting Methods

1. Push in the hand crank and rotate it to cut through a stack of paper.
2. Simply slide the cutting head to cut through a stack of paper.

Follow these instructions carefully to ensure safe and proper usage of the product.

BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.

FOR INDOOR USE ONLY

IMPORTANT SAFEGUARDS

• Read all the instructions before using the product.
• This product is not intended for use by children. Keep product out of the reach of children and pets.
• This product is intended for trimming the paper. Do not use the product for any other purposes.
• Keep all loose items (e.g. jewelry, clothing, neckties, etc.) away from the blade to avoid injury or damage to the product.
• To avoid damaging the product
  • Remove the paper clips and staples from items before trimming the paper.
  • Never lubricate the cutting blade.
  • Do not expose the product to water or other liquids.
• To avoid possible severe injury
  • Never operate the trimmer without the blade guard in place.
  • Never carry the trimmer by the blade.
  • Never carry the trimmer by the rotary blade handle.
• Do not attempt to dislodge jammed debris by using a pointed object, as injury or product damage may occur.
• Always operate the product on a flat, level, steady surface to avoid it overturning.
• Do not hang the product on the wall.
• This product is intended for indoor use only. Do not use or leave this product outdoors.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Components Description

How to use

1. Push in the hand crank
2. Rotate the hand crank to cut through the stack of paper
3. Simply slide the cutting head to cut through the stack of paper

Replacement cutter

Care and Maintenance

CAUTIONS:

1. In order to avoid damaging the product, never immerse the product in water or other liquids.
2. Do not use abrasive cleaners on the product.
3. Dust the blade with a soft cloth, using extreme caution when cleaning near the blade.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>