BOSE BS601 22W Magnetic Portable Wireless Power Bank User Manual

June 12, 2024
Bose

BOSE BS601 22W Magnetic Portable Wireless Power Bank

BOSE-BS601-22W-Magnetic-Portable-Wireless-Power-Bank-product-
image

Product Information

The equipment is designed to comply with the Federal Communications Commission (FCC) radiation exposure limits. These limits are set forth to ensure the safety of users when operating the equipment in an uncontrolled environment.

Product Usage Instructions

Follow the guidelines below to ensure safe and proper usage of the equipment:

  1. Place the equipment in an open and well-ventilated area, away from obstructions and flammable materials.
  2. Ensure that the equipment is not exposed to extreme temperatures or direct sunlight.
  3. Keep the equipment away from water, moisture, and other liquids to prevent damage and potential electrical hazards.
  4. Do not attempt to disassemble or modify the equipment. Any maintenance or repairs should be performed by authorized personnel only.
  5. Use the equipment according to its intended purpose and within the specified operating conditions.
  6. Avoid prolonged exposure to the equipment’s radiation  emissions. If you have concerns about radiation exposure, consultthe product manufacturer or a qualified professional.
  7. Always follow local regulations and guidelines regarding the use of electronic devices.

By following these instructions, you can ensure the safe and effective use of the equipment while complying with FCC radiation exposure limits.

Confirm Receipt of Items List

  • 10000mAh wireless power bank * 1
  • Type c to type-c charger cable * 1
  • Use manual * 1
  • White scrub bag *1
  • Product tray * 1
  • Outer packaging carton *1

Product Introduction

This product is primarily designed to power Magsafe-enabled Apple devices and supports both wireless and wired charging. It can be ch- arged directly with an Apple charging cable. This product also supports pass-through cha- rging, which means you can continue to use it to charge your phone while the device itself is being charged. Additionally, it comes with a foldable stand that is convenient for daily use.
The “pass-through” function requires the power of the charger to exceed 18W. Otherwise, this function will not be activated.

Product Specifications

BOSE-BS601-22W-Magnetic-Portable-Wireless-Power-Bank-1

  1. Power Switch
  2. Magnetic Wireless Charging Area
  3. Type-C Port (in/out)
  4. USB A Port (out)
  5. Lightning Port (in)
  6. Power display Wireless/PD Fast charging display

Details:

Battery capacity: 10000 mAh 3.7V (37Wh)
Raled capacity: 6080mAh (5V=2A)
Energycoversion rate: ≥82%
Total Output: 22W Type-C+USB
A Output: 5V -4A Type-C
Output: 5V-2.4A 5V=3.1A 9V=2.22A 12V= 1.67A
USB A Output: 5V-3.1A 5V =4.4A 9V -2.22A 12V-1.67A
Lightning Input: 5V-2.4A 9V-2A 12V=1.5A Type-C Input: 5V= 3A 9V -2A 12V -1.5A
Wireless Output: 5W 7.5W 10W 15W-MAX

Important Safety Instructions

When using this product, basic precautions should always be followed, including the following:

  1. Store the product in a cool, dry place.
  2. Do not store the product in a hot or humid environment. Avoid using the product in a confined space.
  3. It is recommended to use an original Apple power supply for charging. Low-quality chargers can pose a fire risk.
  4. Operating temperature should be between 0°C to 40°C (32°F to 104°F).
  5. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
  6. If the product is not used for long periods of time, you should charge and discharge it once every three months.
  7. When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
  8. In normal conditions, the battery performance will decline over several years.
  9. Do not dispose of the product in heat or fire.
  10. Do not clean the product with harmful chemicals or detergents.
  11. Misuse, dropping, or excessive force may cause product damage.
  12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
  13. Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.

Operating Instructions

  1. Press the power button once to turn on the power bank and check the battery status (remaining power). Press the power button twice consecutively to turn off the power bank. When the power bank is turned on and no charging: The display screen will light up for approximately 30 seconds and then automatically turn off. The power bank w ill continue to be on standby for 10 minutes, ready to charge devices.

  2. Wired charging:
    Connect the power bank to the corresponding output port using a USB charging cable. The power bank will automatically start charging. Some phones may require pressing a button to initiate charging. If there is no load connected within 10 minutes, the product will automatically shut down.

  3. Wireless charging:
    Press the button once to activate the wireless output function, indicated by the battery indicator light turning on. Place your phone in the wireless charging area to start wireless charging. If there is no load connected within 10 minutes, the product will automatically shut down.

12-Month Hassle-Free Warranty We provide customers with a reliable guarantee. If there is any product quality problem within 12 Months, we will replace it for free. Contact us: sqero_support@yeah.net

Company Information

Manufacturer:
Dongguan Bose Intelligent Technology Co., Ltd Add: Yinjing Road 683-1 Fenggang Town Dongguan City Guangdong Province China 523682Best practices for wireless charging

  • This wireless charger is not compatible with non-Mag Safe phone cases, such as Otterbox Detender cases.
  • You can continue to use wireless charging while charging the power bank, but be sure not to use a 5V/1A(5W) adapter.
  • Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
  • The process of energy conversion will generate heat, which is a common issue for all wireless chargers. It is recommended to use the charger in an environment with a temperature between 25°C/77°F-30°C/86°F.
  • Both the protective phone case and the position to your device on the wireless charger will affect the charging speed. the tarter it is placed from the center of the wireless charger, the slower the charging speed will be.
  • When used in a confined space such as under a pillow, inside a blanket, or in a pocket, the device may generate excessive heat. Please ensure that there is good ventilation during use.

UK REP
GOAL REACH CONSULTING LTD
OFFICE 1029 3 HARDMAN STREET 10TH FLOOR,
SPINNINGFIELDS MANCHESTER, UK M3 3HF
goalservice@hotmail.com

US REP
AOCE Corporation Inc.
6547 N Academy Bivd #2266,Springs, COLORADO
wwbi2008@126.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals