HQPOWER VDLCH4 4 Channel Music Controlled Chaser User Manual
- June 12, 2024
- HQPOWER
Table of Contents
- HQPOWER VDLCH4 4 Channel Music Controlled Chaser
- Product Information
- Introduction
- Safety Instructions
- General Guidelines
- Installation and Operation
- Maintenance
- Technical Specifications
- Velleman® Service and Quality Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HQPOWER VDLCH4 4 Channel Music Controlled Chaser
Product Information
- Product Name: VDLCH4
- Model: VDLCH4
- Manufacturer: HQPower
- Product Type: Lighting equipment
- Power Supply: AC mains
- Max Load per Channel: Not specified
- Max Total Load: Not specified
- Power Consumption: Not specified
- Fuse: Not specified
- Dimensions: Not specified
- Weight: Not specified
- Max Ambient Temperature: Not specified
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing HQPower! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.
Safety Instructions
- Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
- Do not touch the device during operation as the housing heats up.
- Keep this device away from rain and moisture.
- Unplug the mains lead before opening the housing.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- A qualified technician should install and service this device.
- Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
- This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified person carry out the electric connection.
- Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
- Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
- Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
- DO not look directly at the light source as sensitive people may go into an epileptic seizure they do.
- Keep the device away from splashing and dripping liquids. Never put objects filled with liquid on top of the device.
- Note that damage caused by user modifications to the device is not covered by the warranty.
- Keep the device away from children and unauthorised users.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the final pages of this manual.
- This device is designed for professional use on stage, in discos, theatres, etc. The VDLCH4 should only be used indoors with an alternating current of max. 230VAC / 50Hz.
- Do not shake the device. Avoid brute force when installing or operating the device.
- Select a location where the device is protected against extreme heat, dust and moisture.
- Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.
- Use the original packaging if the device is to be transported.
- All modifications of the device are forbidden for safety reasons.
- Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
Installation and Operation
- Plug your lighting equipment into the outlets at the back of the device. Note that the leftmost CEE socket (when watching from behind is not part of the chaser chain but an independent output.
- Adjust the sensitivity of the built-in microphone by means of the rotary knob on the front until the chase steps react to the music in a way that pleases you.
Maintenance
- All screws should be tightened and free of corrosion.
- The housing, the mounting supports and the installation location (e.g. ceiling, suspension, trusting) should not be deformed, modified or tampered with.
- Mechanically moving parts must not show any signs of wear and tear.
- The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
- Disconnect the device from the mains prior to maintenance activities.
- Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
- There are no user-serviceable parts.
- Contact your dealer for spare parts if necessary.
Technical Specifications
power supply | 230VAC~50Hz |
---|---|
max. load per channel | 840W/3.6A @ 230V |
max. total load | 3500W (15A @ 230V) |
power consumption | max. 3500W (max. 1000W per channel/only non-inductive |
loads)
fuse| 15A
dimensions| 220 x 125 x 50mm
weight| 1.6kg
max. ambient temperature| 45°C
Use this device with original accessories only. Velleman n cannot be held responsible in the event of damage or injury resulted from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman v. All worldwide rights
reserved.
No part of this manual or may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without prior written consent of the
copyright holder.
Velleman® Service and Quality Warranty
Velleman® has over 35 years of experience in the electronics world and distributes its products in more than 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty ( see allarantee conditions)
General Warranty Conditions Concerning Consumer Products (for EU):
- All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase
- Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at thevalue of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- frequently replaced consumable goods, parts or accessories such as batteries, lamps, rubber parts, drive belts… (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
- Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
- Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
- Repairs occurring after warranty expiration are subject to shipping costs.
- The above conditions are without prejudice to all commercial warranties.
- The above enumeration is subject to modification according to the article (see article’s manual).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>