BRIGGS STRATTON 3400PSI ELITE Series Pressure Washer User Manual
- June 4, 2024
- BRIGGS STRATTON
Table of Contents
BRIGGS STRATTON 3400PSI ELITE Series Pressure Washer User Manual
Main Unit
Note: Unless noted otherwise, use the standard torque specifications.
Main Unit|
---|---
REF NO| PART NO| QTY| DESCRIPTION
1| B192991GS| | BASE
2| BB3861CGS| | HANDLE
3| BB4105GS| | BUMPER
4| B4805GS| | HOSE
5| 30809GS| | GROMMET
6| 192134GS| | KIT, Engine Mounting Hardware
7| B2516GS| | VINYL CAP
8| 192132GS| | KIT, Pump Mounting Hardware
9| B4196GS| | KIT, Handle Hardware
10| 192910GS| | KIT, Bumper Mounting Hardware
11| 192553GS| | KIT, Vibration Mount
12| 192135GS| | KIT, Garden Hose Inlet
13| 95458GS| | QUICK CONNECT
14| 190147GS| | PUSHNUT
15| B1436BGS| | GUN
16| B4847GS| | KIT, Spray Tips
17| 195016GS| | THERMAL RELIEF
18| 190779GS| | EXTENSION
19| 192526GS| | KIT,Wheel
20| 192796GS| | KIT, Chemical Hose/Filter
21| 63281GS| | KEY
22| 194036GS| | ASSY, Pump
-(see “Pump”)
900| ~NSP| | ENGINE
| 193142GS| | MANUAL, Owner’s
-Not Illustrated
| MS5242| | MANUAL, Engine
-Not Illustrated
| 192912GS| | KIT, Decals
-Not Illustrated
| BB3061GS| | OIL, Engine
-Not Illustrated
| 191922GS| | KIT, O-RING MAINT & NZZL CLNNG
-Not Illustrated
Pump (191879)
Note: Unless noted otherwise, use the standard torque specifications
REF NO | PART NO | QTY | DESCRIPTION |
---|---|---|---|
14 | 198849GS | CAP, Oil Dipstick | |
16 | 116B2126GS | O-RING, Square | |
27 | 203034GS | KIT, Drain Plug | |
A | 500-87628PGS | * KIT, Valve | |
B | 201B2126GS | KIT-PISTON | |
C | 203B2126GS | KIT-WATER SEAL | |
D | 204B2126GS | KIT-SUPPORT RING | |
E | 192914GS | * KIT, Hose Tail | |
F | 153B2126GS | * UNLOADER, Complete | |
G | 193991GS | * KIT, O-Rings | |
H | 199894GS | * KIT, Bolts | |
J | 202B2126GS | KIT-OIL SEAL | |
— | B2384GS | Filter, Inlet |
-(Not Illustrated)
—| 6039| | Pump Saver
-(Optional Accessory)
—| 186452GS| | FILTER, Inlet, Bag of 10
-(Optional Accessory)
—| 6033| | Oil Bottle, Pump
-(Optional Accessory)
Hardware Identification & Torque Specifications
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is the Nominal size,
meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a
second number is present it represents the threads per inch (distance between
threads).
When bolt or capscrew is identified as 1/2 – 16 x 2” (M8 – 1.25 x 50), this
means the Nominal size, or body diameter is 1/2 inch (8mm metric thread
diameter), the second number,16, represents the
threads per inch, (distance between threads). The final number is the body
length of the bolt or screw, 2 inches (50mm).