DALI PE-BL150TV 150W ALDimming LED Dimming Driver Owner’s Manual
- June 12, 2024
- DALI
Table of Contents
DALI PE-BL150TV 150W ALDimming LED Dimming Driver
Features
- Constant voltage driver dimming range 0-100%
- Suitable for RPC MOSFET dimmer and FPC TRAIC dimming system
- Suitable for 0-10V/1-10V/10V PM/100K resistor dimming
- Output flicker free, Super compatible dimming driver
- Protections: short circuit/over voltage/over current
- Aluminum case, fast heat dissipation
- Unique design slow light, slow off function
- It is suitable for constant voltage LED light belt
- Large diameter copper terminals, convenient install
- Meet up SELV safety extra low voltage standard
- Three years warranty
General description
Constant voltage LED driver developed by my company with high power factor , high efficiency, high precision, the use of the efficient stable low loss switch control chip and the high performance components makes it with low noise, energy saving, environmental protection, long life and other characteristics.
Unique design slow light and slow off function, safe and convenient large aperture terminal.
Specification
| 0RGHO | 3(-%/l507924 | 3(- %/l5079l2 |
|---|
287387
| 2XWSXW 9ROWDJH| 249GF| 129GF
0D[ 2XWSXW &XUUHQW| 6.25$ 0D[| 10$ 0D[
1RQ-ORDG 2XWSXW 9ROWDJH| 249GF “0.5Y| 129GF “0.5Y
2XWSXW &XUUHQW| 6.25$ 0D[| 10$ 0D[
2XWSXW 3RZHU| 150: 0D[| 120: 0D[
6WUREH /HYHO| 1R IOLFNHU
‘LPPLQJ 5DQJH| 0a100%
3:0 ‘LPPLQJ )UHTXHQF| !3600.
,1387
| ‘LPPLQJ ,QWHUIDFH| 7ULDF /HDGLQJ HGJH/7UDOOLQJ HGJH,0-109/1-109/109
3:0/100. UHVLVWRU
,QSXW 9ROWDJH 5DQJH| 200-2509DF
)UHTXHQF| 50/60+]
,QSXW &XUUHQW| <1.5$| <1.2$
| 85%| 85%
,QUXVK &XUUHQW(W\S.)| &ROG VWDUW 31$| &ROG VWDUW 30$
$QWL 6XUJH| /-1: 2N9
/HDNDJH &XUUHQW| <0.5P$/2309DF
(19,5210(17
| :RUNLQJ 7HPSHUDWXUH| WD: 45 & WF: 85 &
:RUNLQJ +XPLGLW| 20 a 95%5+, QRQ-FRQGHQVLQJ
6WRUDJH 7HPS., +XPLGLW| -40 a 80 & , 10a95%5+
:DWHUSURRI JUDGH| ,320
3527( &7,21
| 2YHU-&XUUHQW 3URWHFWLRQ| 6KXW GRZQ WKH RXWSXW ZKHQ UDWHG SRZHUı102%, DXWR
UHFRYHUV.
6KRUW &LUFXLW 3URWHFWLRQ| 6KXW GRZQ DXWRPDWLFDOO\ LI VKRUW FLUFXLW RFFXUV,
DXWR UHFRYHUV.
1RQ-ORDG 3URWHFWLRQ| RXWSXW &RQVWDQW 9ROWDJH.
6$)(7 < &
(0 &
| :LWKVWDQG 9ROWDJH| ,/3-2/3:37509DF
,VRODWLRQ 5HVLVWDQFH| ,/3-2/3:10002/5009’&/25ć/70%5+
6DIHW\ 6WDQGDUGV| ,(&/(161347-1, ,(&/(161347-2-13
6WUREH 7HVW 6WDQGDUG| ,((( 1789
27+(56
| ‘LPHQVLRQ| 287 6ð61ð40PP(/ð:ð+)
3DFNLQJ| %XEEOH EDJ
:HLJKW(*.:.)| 56010J
Dimensions
Product Label
Wiring Diagram
Wiring
- The input terminal: more than 2 m2 copper core wire.
- The output terminal: more than 1 m2 copper core wire.
Compatibility
‘LPPLQJ V\VWHP 0RGHO|
:ULQJ 1 VDPSOH
|
:ULQJ 2 VDPSOHV
|
:ULQJ 3 VDPSOHV
|
‘LPPHU 0RGHO
|
:ULQJ 1 VDPSOH
|
:ULQJ 2 VDPSOHV
|
:ULQJ 3 VDPSOHV
|
‘LPPHU 0RGHO
|
:ULQJ 1 VDPSOH
|
:ULQJ 2 VDPSOHV
|
:ULQJ 3 VDPSOHV
---|---|---|---|---|---|---|---|---|---|---|---
/HYLWRQ /13:5-05%| 1)| 1)| 1)| &UHVWURQ ‘,1-1’,04| 1)| 1)| 1)| 3DQDVRQLF
:0<549| 1)| 1)| 1)
6LHPHQV 5:1 528-1’%01| 1)| 1)| 1)| 6FKQHLGH /5504’2$| 1)| 1)| 1)| 6LHPHQV
58+82223-1&01| 1)| 1)| 1)
-2%2 GLPPLQJ V\VWHP| 1)| 1)| 1)| ‘$-,1 ‘&-70405&3| 1)| 1)| 1)| 6LPRQ 45(201| 1)| 1)| 1)
‘$/,7(. ‘0802| 1)| 1)| 1)| /LWH-3XWHU (‘;-)0411| 1)| 1)| 1)| 233/( 3068102|
1)| 1)| 1)
/XWURQ 465-33| 1)| 1)| 1)| | 1)| 1)| 1)| &$%/2),/ 95&02| 1)| 1)| 1)
$%% 6197/12-12-101-500| 1)| 1)| 1)| | 1)| 1)| 1)| &’1 ;6-702| 1)| 1)| 1)
5PDUNV| $EEUHYLDWLRQ: QR IOLFNHU – 1), QRW FRPSDWLEOH – 1&, VOLJKW IOLFNHU –
6/, IOLFNHU – ), VWULFW IOLFNHU – 6)
Note:
- due to the different power of dimmer and dimming system, the compatibility will be different. Before purchase, it needs to confirm with the business to ensure the best matching effect of the product.
- It is recommended to use a leading edge dimmer power more than 500W.
The use of guidance:
Note:
- please pay attention to the distinction between input and output, connect correctly, then power on
- please connect first the load of the DC output, open the power supply after checking; in the constant current mode, if power on at open circuit, please turn off the power supply and can’t connect the LED until the electric energy stored by the output release, or it may damage the LED;
- this type of power supply is only limited to the use of the LED lamps and lanterns, the input voltage range is AC200-250V, the heat insulation cotton and other items that obstruct the heat dissipation of the product, which conforms to the product under the Specified output voltage, current range, the use environment temperature is -20-45 degrees, and the surface can not cover the conditions of the environment, this product enjoys three yearsof free warranty.
- The input end cannot be connected to the inductive frequency conversion power supply for dimming, otherwise noise will be generated
The abnormal conditions and the corresponding treatment methods:
- the LED lamp doesn’t bright after the dimming driver is connected at the first time please turn off the AC input and check as follow:
- a) Whether or not DC output bad contact;
- b) Whether DC output polarity is reversed, or the LED board is welded anti; Whether AC input is bad contact; test after eliminating these failures.
- the device has good connection, LED lights, but the LED flicker, please turn off the AC input, then check the DC output:
- a) overload, under load.
- b) Whether or not the parameters and actual parameters match.
- please timely communicate with us if you any questions in the using, we will try our best to solve the problems with you.
Statement
The pictures and specifications is for reference only, in kind prevail,
specifications are subject to change with further notice.