CRAFTSMAN TIDES Neo-Angle Shower Door Instruction Manual

: June 12, 2024
: Craftsman

Table of Contents

CRAFTSMAN TIDES Neo-Angle Shower Door
Product Information
OVERVIEW
PARTS LIST
INSTALLATION PROCEDURE
WALL JAMBS POSITIONING
INSTALL THE SHOWER DOOR UNIT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CRAFTSMAN TIDES Neo-Angle Shower Door

Product Information

The TIDES Neo-Angle Shower Door is a high-quality shower door manufactured by FGI Industries, Ltd. It is designed to provide a sleek and modern look to your bathroom while offering functionality and durability. The shower door is made with tempered glass, ensuring safety and strength.

The TIDES Neo-Angle Shower Door comes with all the necessary parts and hardware for installation. It is available in both left and right configurations, allowing you to choose the one that suits your shower layout. The shower door is compatible with various types of shower enclosures, including acrylic, fiberglass, and tiled enclosures.

FGI Industries, Ltd. is committed to providing excellent customer service. They offer a toll-free customer assistance hotline for both US and Canada customers. Additionally, they have a website and YouTube channel where you can find helpful installation videos and warranty information.

READ THE INSTRUCTIONS CAREFULLY
Familiarize yourself with all the parts as shown in the exploded view. The exploded view will also provide a helpful reference when relating to the location of the various parts and how they are mounted.

OVERVIEW

PARTS LIST

WARNING: Safety glasses should always be worn when working with tempered glass.

RECOMMENDED TOOLS

CRAFTSMAN-TIDES-Neo-Angle-Shower-Door-FIG-3

CHOOSE WHETHER YOU ARE INSTALLING LEFT OR RIGHT SHOWER DOOR

Determine which assembly conﬁguration you need to follow based on the location of the shower head as viewed from the outside of the shower.

INSTALLATION PROCEDURE

STEP 1

CRAFTSMAN-TIDES-Neo-Angle-Shower-Door-FIG-4

STEP 2
Insert Angle Bracket(12) into top frame of the Side Panel(8) attached to the top Door Frame(11) using Screw(13).

WALL JAMBS POSITIONING

INSTALLING WALL JAMBS

4A. Realign wall jamb. Mark drilling location. Remove the wall jamb temporarily (#1)
4B. With a 1/4″ drill bit, drill 4 holes into the wall using the marks as a guide

REPEAT ON BOTH SIDES

4C. Insert 6 wall plugs(#16) and put in each a drop of silicone.
4D. Fasten wall jamb with screw 4x38mm (#15)

FOR ACRYLIC & FIBERGLASS SHOWER ENCLOSURES
Using a 1/8 inch drill bit, drill a hole about 1-1/2 inch deep at each of the previously marked locations.

WARNING: Do not use wall anchors with fiberglass of acrylic shower enclosures.

FOR TILED SHOWER ENCLOSURES

Using a 1/4 inch masonry drill bit, drill a hole about
1-1/2 inch deep at each of the previously marked locations.
Insert wall plugs into each of the drilled holes.

INSTALL THE SHOWER DOOR UNIT

5A. Insert one side of assembly into wall-jamb(#1) as shown.
5B-5C. Engage the other side of assembly into wall jamb(#1)

SHOWER DOOR ADJUSTMENT

6A. Adjust assembly on the base.
6B. Insert shower assembly into wall-jamb(#1) by securing with screws(#16).

SHOWER DOOR ADJUSTMENT

7A. If it is necessary adjust the door panel, with Phillips head screw driver.
7B. Slide the splash guard(#4) into the door panel.

SILICON SEAL THE SHOWER.
8A. Silicone exterior the bottom of the fixed panel(#8) and frame (#11) and along the wall jambs(#1).

ATTENTION CONSUMER:
IMPORTANT SHOWER ENCLOSURE WARRANTY INFORMATION

PLEASE DO NOT DISCARD
Thank you for your purchase of a shower door from FGI Industries, Ltd.
In order to be eligible for product warranty, please register your door on our website within two (2) weeks of installation. Go to: https://craftandmain.com/warranty/ and follow the instructions.

For any questions or comments about your new shower door,
please contact our Customer Service at:

CONTACT