FAGERHULT SE-566 80 Habo Vialume 1 Road and City Street Instruction Manual
- June 12, 2024
- FAGERHULT
Table of Contents
FAGERHULT SE-566 80 Habo Vialume 1 Road and City Street
Product Information
Product Name: Vialume 1
Manufacturer: Fagerhult Sweden
Importer: Fagerhult UK
Address: 33-34 Dolben Street, London, SE1 OUQ
Product Usage Instructions
- To insert the arm, adjust the Arm Insert Depth to a maximum of174 mm.
- Insert two screws (x2) and tighten them with a torque of 12 Nm.
- For post insertion, adjust the Post Insert Depth to a maximum of 15 meters.
- Tighten two screws (x2) with a torque of 10 Nm.
- The luminaire should be positioned in a way that prevents prolonged staring at a distance closer than 1 meter.
- The light source and control gear should only be replaced by the manufacturer or its designated person.
- Ensure basic insulation between mains and control wiring (Class II).
- Pass on this information to the users of the installation.
If the cord of the luminaire is damaged, it should only be replaced by the manufacturer or a person designated by themanufacturer.
Note: If the arm’s cable is damaged, it should be replaced by the manufacturer or a person designated by the manufacturer.
Dimension
- Max weight 8,75 kg
- Max projected area
- From below 0,167m²
- From the side 0,073m²
Installation
Class II
If the cord of this luminaire is damaged, it shall exclusively be replaced by
the manufacturer, or by the manufacturer designated person
The light source and control gear shall only be replaced by the manufacturer
or its designated person.
Warning
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 1 m is not expected.
It is appropriate that this information is passed on to the users of the
installation.
Manufactured by Fagerhult Sweden. For UK market importer Fagerhult UK 33-34
Dolben Street, London, SE1 OUQ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>