Cambridge Audio SX-60 Bookshelf Speaker User Manual
- June 12, 2024
- Cambridge
Table of Contents
Cambridge Audio SX-60 Bookshelf Speaker
INTRODUCTION
Thank you for purchasing these Cambridge Audio SX-60 stand-mount loudspeakers. We hope that you enjoy many years of listening pleasure from them. Your loudspeakers can only be as good as the system it is connected to. Please do not compromise on your amplifier or cabling. Naturally, we particularly recommend amplification from the Cambridge Audio range, which has been designed to the same exacting standards as our loudspeakers. Your dealer can also supply excellent quality speaker cables to ensure your system realizes its full potential. Thank you for taking the time to read this manual; we do recommend you keep it for future reference.
LIMITED WARRANTY
Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio’s option) this product or any defective parts in this product. Warranty periods may vary from country to country. If in doubt consult your dealer and ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorized dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your Cambridge Audio product, it can be returned by your dealer to Cambridge Audio or an authorized Cambridge Audio service agent. You will need to ship this product in either its original packaging or packaging affording an equal degree of protection. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a Cambridge Audio authorized dealer. You may call Cambridge Audio or your local country Cambridge Audio distributor to confirm that you have an unaltered serial number and/or that you purchased from a Cambridge Audio authorized dealer.
This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance, or installation, or attempted repair by anyone other than Cambridge Audio or a Cambridge Audio dealer, or authorized service agent who is authorized to do Cambridge Audio warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover products sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. CAMBRIDGE AUDIO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some countries and US states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other statutory rights, which vary from state to state or country to country.
The crossed-out wheeled bin is the European Union symbol for indicating separate collec-tion for electrical and electronic equipment. This product contains electrical and electronic equipment which should be reused, recycled or recovered and should not be disposed of with unsorted regular waste. Please return the unit or contact the authorized dealer from whom you purchased this product for more information.
SPECIFICATIONS
SX-60 Speakers
- Sensitivity: 89dB
- Frequency response: 41Hz – 22kHz
- Impedance: 8 ohms
- Drive units: 25mm (1”) silk dome 165mm (6.5”) doped paper cone bass/mid driver
- Crossover: 2-way
- Recommended amplifier power: 20 – 100 Watts
- Magnetic shielding: No
- Speaker dimensions (h x w x d): 340 x 200 x 272mm
- Weight: 5.0kg (11lbs)
SINGLE-WIRING
- Read all instructions
- Avoid damp
- Avoid solvent-based cleaners
- Avoid extreme temperatures
- Avoid direct sunlight
- Secure all cables
CABLING Connect speakers to your amplifier/receiver with a high-quality speaker cable.
IMPORTANT! Ensure positive (+) and negative (-) connections are matched.
POSITIONING
Ideally, the speakers and listening position should be located equal distances apart, but feel free to experiment with positioning until you are happy with the sound.
STAND MOUNTING
For best results, use dedicated speaker stands. If used on a sturdy shelf, allow ample space behind the speaker (minimum 5cm).
If the speakers are placed on a desk or close to a wall, the bass may become too strong. We have provided foam bass tuning bungs that will reduce bass output when inserted into the ports.
FREQUENTLY ASKED QUESTIONS
What are bookshelf speakers?
Bookshelf speakers are compact audio speakers designed to be placed on shelves or any elevated surface. They are typically used for music listening or as part of a home theater setup.
How big are bookshelf speakers?
Bookshelf speakers vary in size, but they are generally smaller than floor- standing speakers. They can range from around 5 to 15 inches in height and may be a few inches wide and deep.
What is the purpose of bookshelf speakers?
Bookshelf speakers are intended to deliver high-quality sound in a compact form factor suitable for smaller spaces or as part of a surround sound system.
How do bookshelf speakers differ from floor-standing speakers?
Bookshelf speakers are smaller and more compact compared to floor-standing speakers. They also usually have a more limited frequency response and may require additional stands or mounting brackets.
Can bookshelf speakers be used without an amplifier?
While some bookshelf speakers are powered and can be used without an external amplifier, most models require an amplifier or a receiver to function properly.
What is the typical power range for bookshelf speakers?
The power range for bookshelf speakers can vary, but it's usually between 20 to 150 watts RMS per channel.
How should bookshelf speakers be positioned for optimal sound?
Ideally, bookshelf speakers should be placed at ear level, either on speaker stands or wall-mounted brackets. They should also be positioned away from walls to avoid excessive bass buildup.
Can bookshelf speakers be used as part of a home theater system?
Yes, bookshelf speakers can serve as front or rear surround speakers in a home theater setup, providing a more immersive audio experience.
Do bookshelf speakers come with speaker wire?
Bookshelf speakers typically do not include speaker wire, so you'll need to purchase it separately to connect them to your amplifier or receiver.
Can bookshelf speakers be used with a turntable?
Yes, bookshelf speakers can be used with a turntable, but you may need a phono preamp if your turntable doesn't have one built-in.
What are the benefits of using bookshelf speakers over larger speakers?
Bookshelf speakers are more space-efficient and blend better into smaller rooms, making them a great choice for apartments or rooms with limited space.
Can bookshelf speakers be used for outdoor applications?
While some bookshelf speakers are designed for outdoor use, not all of them are weather-resistant, so it's essential to check the specifications before using them outdoors.
How do bookshelf speakers handle bass frequencies?
Bookshelf speakers generally have smaller drivers, which limits their bass response compared to larger speakers. Some models may include a separate subwoofer to enhance bass performance.
Are bookshelf speakers wireless?
Some bookshelf speakers come with built-in Bluetooth or Wi-Fi connectivity, allowing wireless audio streaming from compatible devices.
Can bookshelf speakers be used with a TV?
Yes, bookshelf speakers can be used with a TV if connected to an amplifier or receiver with the appropriate audio output.
What is the difference between 2-way and 3-way bookshelf speakers?
2-way bookshelf speakers have two drivers (typically a woofer and a tweeter), while 3-way bookshelf speakers have three drivers (woofer, mid-range, and tweeter). 3-way speakers generally offer more accurate sound reproduction.
DOWNLOAD THE PDF LINK: Cambridge Audio SX-60 Bookshelf Speaker User Manual