WORLDEYECAM TD-9554C1 Network Camera User Guide

WORLDEYECAM TD-9554C1 Network Camera

Product Information

The Network Camera is a surveillance camera that allows you to monitor and record video footage. It is equipped with various features such as audio input, micro SD card slot, and Ethernet connector for network connectivity. The camera also comes with a mounting base and enclosure for easy installation. Please refer to the user manual for detailed instructions.

Package Contents

• CD
• Drill template
• Screwdriver

Overview of Camera

1. Ethernet connector
2. Audio input
3. Power connector
4. Mounting base
5. Fixed screw
6. Microphone
7. Micro SD card slot
8. Reset Security Cap

• 1 It is recommended to install the security cap for outdoor installation.
• 2 If the PoE switch is used to power the camera, DC12V power supply is not required.

Note: It is recommended to install the security cap for outdoor installations. If using a PoE switch to power the camera, DC12V power supply is not required.

Product Usage Instructions

Installation

1. Ensure that the wall or ceiling can support three times the weight of the camera. Install and use the camera in a dry environment. Loosen the fixed screw to disassemble the camera.

2. Unscrew the cover of the dome and insert a micro SD card. Then reinstall the cover firmly.

3. Drill screw holes and a cable hole on the ceiling according to the drill template. Route and connect the cables.
   Connect the earth wire as follows:

   • (a) Loosen the nut from the main element.
   • (b) Run the network cable (without RJ 45 connector) through both elements. Then crimp the cable with an RJ 45 connector.
   • (c) Connect the cable to the hermetic connector. Then tighten the nut and the main cover. Fix the camera with the fixed screw.

4. Secure the mounting base to the ceiling or wall using the provided screws.

5. Install the dome and enclosure to the mounting base.
   Adjust the dome to obtain an optimum view angle.

6. Finally, fix the camera with the fixed screw.

Network Connection

Here we take using IE browser to access IP camera via LAN for example.

Access Through IP-Tool

To access the IP camera via LAN using an IE browser, follow these steps:

1. Ensure that the camera and PC are connected to the local network.

2. Install IP-Tool from the CD and run it after installation.

3. Double click the camera information listed in the IP-Tool to open the web browser. Or manually enter the default IP address in the address bar of your browser.
   The default IP address of this camera is 192.168.226.201.
   Then follow directions to download and install the plugin if it is the first time for you to log in.

4. Activate and log in the camera. The default username is admin; the default password is 123456 or you need to self-define the password. Please operate according to the actual situation.

Please refer to the user manual for further instructions on network configuration, device settings, and accessing the camera through different devices.

Warning and Caution

• If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not be responsible for any problems caused by unauthorized repair or maintenance.)
• Do not allow water or liquid intrusion into the camera.
• In the use of the product, you must be strict compliance with the electrical safety regulations of the nation and region. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
• Do not use camera beyond specified voltage range.
• Do not drop the camera or subject it to physical shock.
• The product must be grounded to reduce the risk of electric shock.
• Avoid touching the camera lens.
• If cleaning is necessary, please use clean cloth to wipe it gently.
• Do not aim the camera at the sun or extra bright place.
• Do not place the camera in extremely hot, cold (the operating temperature shall be -30˚C~60˚C), dusty or damp locations, and do not expose it to high electromagnetic radiation.
• To avoid heat accumulation, good ventilation is required for operating environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>