LUCiDE 27889 JUSTINE Rechargeable Table Lamp Instruction Manual
- June 12, 2024
- LUCIDE
Table of Contents
27889 JUSTINE Rechargeable Table Lamp
Instruction Manual
Item
number: 27889/02/97
EAN code: 5411212272195
JUSTINE
27889 JUSTINE Rechargeable Table Lamp
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
General
Dimensions LxWxH: 13,5cm x 13,5cm x 38cm
Main material: Pvc
Color: Rust Brown
Style: Cottage
Shape: Round
Weight: 1,22kg
Specifications
Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height: Not In Height Adjustable
Directional: Not Directional
Cable: Yes, Cable On Product
Sensor: Without Sensor
Control: Dimmer – On The Product
Power supply: Battery pack
IP-Class: 54
Electric Class: 3
Number of light sources: 1
Lamp socket: Integrated LED
Maximum wattage: 2W
Power requirements: 220V
Lumen: 210Lm
Colour temperature: 2700K
Beam angle (if directional): 360°
Color Rendering Index: 80
Warranty: 3 Years
The explanation of the IP ratings can be found in the safety instructions.
INSTALLATION DRAWING SPECIFICATIONS
Important:
- The lamp works normally even when it is on charge.
- The battery has an overload protection function.
- The support surface for the lamp must not exceed a 15° tilt or it will fall.
- It is advisable to use the original adapter. Otherwise, it may damage the product.
- The best ambient temperature range is 10-45°C.Lower or higher temperature will shorten the battery lifetime. Please do not use this lamp under direct sunshine.
- Fully charge the battery before initial use. The lamp should be charged in regular intervals to prolong the battery lifetime. if the lamp is not used for a long time, please charge every three months to avoid the battery damage.
- We recommend a soft cloth to dean the lamp. The cloth can be humid with a little water if needed. Please do not use alcohol or other aggressive cleaning agents.
Safety Instructions for outdoor items
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture.
The manufacturer does not accept any responsibility for damage caused by
improper installation and service. Installation should always be done by a
qualified electrician. Always isolate the power before commencing
installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products.
Always respect the minimal distance (indicated on the light) to inflammable
products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched.
Always use the correct bulb (respect type and maximal wattage as indicated on
the product).
Explanation of the symbols which can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom (except if a
higher IP degree permits that the item can be used in the bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicating separate collection of such equipment must be
returned to a municipal waste collection point.
| Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth connection (marked with this symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must not
be connected to the earth wire.
| IP 44 : Splash proof
| IP 54 : Dust protected and splash proof
| IP 65 : Dust-tight and protected against water jets
| IP 67 : Dust-proof and protected against immersion for 30 minutes
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 3 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, discoloring as a result from normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over defective fixture/part and
the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
DISCOVER OUR COLLECTION!| CURIOUS ABOUT OUR BRAND?|
#ILLUMINATESYOURWORLD
---|---|---
https://qrcodes.pro/ctf05b| https://qrcodes.pro/PEN8Q4|
https://qrcodes.pro/mJ5x94
Visit our website and discover our entire collection| Our brand video gives
you a glimpse behind the scenes at Lucida| Take a look at how others around
the world use Lucida products
Follow us for the latest lighting trends!
For more specifications of this product please visit
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>