blueparrott M300-XT SE Ultra-Light Noise Cancelling Bluetooth Headset User Manual

blueparrott M300-XT SE Ultra-Light Noise Cancelling Bluetooth Headset

BlueParrott M300-XT SE User Manual Made in China

• MODEL: OTE970

Declaration of Conformity can be found on www.jabra.com/doc

1. Welcome Thank you for choosing the BlueParrott M300-XT SE. This user manual provides detailed information on how to use the product
   effectively.

2. BlueParrott M300-XT overview
   The BlueParrott M300-XT is equipped with 2 microphones for crystal-clear calls.
   It features various functions, including power on/off, answer/end call, reject call, volume control, mute microphone, and a customizable BlueParrott buttonTM. The headset also has a charging port and a microphone.

3. Included accessories The product comes with the following accessories:

  * USB cable – EarGels (small, medium, large)

3. How to wear
   The BlueParrott M300-XT can be worn on either the left or right ear.
   To switch ears, rotate the microphone horizontally to the other side and swivel it up and over, pointing it towards your mouth.

4. Selecting an EarGel To ensure optimal comfort and sound quality, choose the appropriate EarGel size. The EarGel should rest gently against your ear canal without being squeezed or pushed into it. Try all three sizes (small, medium, large) to find the best fit for you.

5. How to get the perfect fit For the best audio quality and comfort, the EarGel should fit firmly in your ear without being squeezed into your ear canal.

6. How to charge To charge the headset, connect the USB charging cable to the headset’s USB charging port. It is recommended to use the supplied charging cable. The battery takes up to 150 minutes to fully charge. While charging, the LED indicator shows the charging status. A red light indicates that the headset is charging, while a blue light indicates that the headset is fully charged.

7. How to connect

8. Power on Press and hold the Multi-function button for 1 second until the LED flashes blue and you hear “Power on.”

9. Power off Press and hold the Multi-function button for 3 seconds until the LED flashes red and you hear “Power off.”

10. Pair to your smartphone

11. Ensure the headset is powered off.

12. Press and hold the Multi-function button for approximately 6 seconds until you hear “Pair mode” and the LED flashes red and blue. The headset is now ready to pair.

13. Go to the Bluetooth menu on your smartphone and select the M300-XT from the list of available devices.

Please refer to the user manual for more information on additional features and support options. BlueParrott app For enhanced functionality, you can download and use the BlueParrott app. Support For frequently asked questions (FAQs), tips on caring for your headset, and instructions on cleaning your headset, please refer to the support section of the user manual.

Welcome
Thank you for using the BlueParrott M300-XT. We hope you will enjoy it!

BlueParrott M300-XT features

• Customizable BlueParrott ButtonTM – Program for mute, speed dial or Push-to-Talk
• Walk and talk – Roam up to 300ft/100m from paired Bluetooth devices
• All-day conversations – Up to 14 hours of talk time
• USB-C charging – For added convenience
• Blocks out 80% of background noise – 2 microphones for crystal-clear calls

BlueParrott M300-XT overview

Included accessories

• USB cable
• EarGels

How to wear

• The headset can be worn on the left or right ear.
• To wear the headset on the other ear, rotate the microphone horizontally to the other side. Then swivel the microphone up and over and point it towards your mouth.

Selecting an EarGel

• To achieve the optimal comfort and sound quality, the fit of the earbud is essential.
• The EarGel should rest gently against your ear canal. Do not squeeze or push the EarGel into your ear canal. Make sure you try all three EarGel sizes until you find the fit that gives you the best combination of comfort and sound quality.

How to get the perfect fit

For the best audio quality and comfort, the EarGel should fit firmly in your ear, but should not be squeezed into your ear canal.

How to charge

• To charge the headset, connect the USB charging cable to the headset’s USB charging port. It is recommended to charge the headset using the supplied charging cable. It takes up to 150 minutes to fully charge the battery.
• While charging, the LED indicator shows the charging status. Red indicates the headset is charging. Blue indicates the headset is fully charged.

How to connect

1. Power on
   Press and hold the Multi-function button for 1 second until the LED flashes blue and you hear “Power on”.

2. Power off
   Press and hold the Multi-function button for 3 seconds until the LED flashes red and you hear “Power off”.

Pair to your smartphone

1. Ensure the headset is powered off.
2. Press and hold the Multi-function for approx. 6 seconds until you hear “Pair mode” and the LED flashes red and blue. The headset is now ready to pair.
3. Go to the Bluetooth menu on your smartphone and select the M300-XT from the list of available devices.

Connect to your smartphone using NFC

1. Ensure your headset is powered on, and that NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection.

Please note that not all phones support NFC pairing.

How to use

Calls

What the buttons do

• Answer call

  • Press the Multi-function button

• End call

  • Press the Multi-function button

• Reject call

  • Press and hold (2 sec) the Multi-function button

• Activate Voice Assistant (i.e. Siri, Google Assistant)

  • Press the Multi-function button when not on a call

• Adjust volume

  • Press the Volume up or Volume down button, when listening to music or on a call.

• Turn LEDs on/off

  • Press both the Volume up and Volume down buttons simultaneously

• Transfer audio from headset to smartphone

  • While on a call, press and hold (2 sec) the Volume down button to transfer to the call audio to your paired smartphone. Repeat to transfer the call audio back to your headset.

• Redial last number

  • Press and hold (1 sec) the volume down button until you hear a beep.

• Mute/un-mute microphone

  • Press the BlueParrott button when on a call. Alternatively, press and hold (2 sec) the Volume up button.

The BlueParrott buttonTM

• By default, the BlueParrott button mutes the microphone. However, the button can be configured for other functions, such as speed speed dial, push-to-talk, access second paired mobile device, or to check the battery level.
• To change the BlueParrott button functionality, use the BlueParrott app for Android or iOS.

Multiple call handling

The headset can accept and handle multiple calls at the same time.

Multiple call handling

• End current call and answer incoming call
  • Press the Multi-function button to end the current call. Then press the Multi-function button to answer the incoming call
• Put current call on hold and answer incoming call
  • Quickly press the Multifunction button twice
• Reject incoming call when on a call
  • Press and hold (2 sec) the Multi-function button

Multipoint mode

• The headset can pair to 8 smartphones and connect to two at once (Multipoint mode).
• To connect to two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).
• The M300-XT will monitor both smartphones and enable you to answer a call on either one using the headset.
• If you are on a call and the other smartphone receives a call, you will hear a notification in the headset.

Update firmware

The BlueParrott M300-XT can be updated to the latest firmware version using the BlueParrott app.

Reset the headset

Resetting the headset clears the list of paired devices.

1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume up and Volume down buttons until you hear two beeps.
3. Power off the headset.

You will need to re-pair the headset to your smartphone.

BlueParrott app

• Program your BlueParrott ButtonTM anywhere, anytime.
• Integrate with a range of third-party platforms for a seamless Push-to-Talk (PTT) experience.
• Easily access full user guide for your headset.

Support

FAQ
View the FAQs on BlueParrott.com/supportpages/BlueParrott-M300-XT

How to care for your headset

• To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed truck in summer or in winter conditions.
• When exposed to water, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly and power on.
• Do not store the headset for extended periods of time without recharging them (max. three months).

How to clean your headset

1. Apply normal dish soap and water to a cloth, making sure to wring out any excess liquid so the cloth is not dripping wet. Use soap and water only; do not use strong cleaning agents.
2. Gently wipe the headset with the wet cloth, making sure the headset is clean with no layer of suds on the surface.
3. Let the headset rest for at least one minute.
4. Wipe the headset clean with a cloth dampened with water only.
5. Allow the product to dry.

© 2023 GN Audio A /S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.

Made in China
MODEL : OTE970
Declaration of Conformity can be found on www.jabra.com/doc

References

• Wireless Headsets and Headphones for Office, Music & Sport | Jabra

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>