televic 71.98.1303 T-Cam Camera Tracking Package Owner’s Manual
- June 12, 2024
- televic
Table of Contents
televic 71.98.1303 T-Cam Camera Tracking Package
Description
- The T-Cam Camera Tracking package is a complete and out-of-the-box solution for conference camera tracking.
- It allows straight-forward installation, fast configuration, and integration of a camera tracking system with any Televic Conference system. The T-Cam solution controls up to 4 IP-CAM501, using the 3G-SDI connectivity.
- By combining hardware and software, the T-Cam solution makes it easy to use and control cameras. Installers can quickly set up cameras, create talking heads, automatically switch the camera between participants, and even add a participant’s name as an overlay2 on top of the image. The end result is a package that makes camera integration plug-and-play.
- The T-Cam Camera Tracking Solution comes in 3 different packages.
- The basic package includes 2 cameras by default. One additional license is required for each additional camera. (for a maximum of 4 cameras).
- Available as an add-on in the T-Cam Name Overlay package.
Packages
Basic T-Cam Package [71.98.1303]
The basic package contains everything you need for a basic camera tracking
setup:
- 2 IP-CAM50 cameras
- Camera interconnection cables
- Preview capture card: Blackmagic DeckLink Mini Recorder
- Video switcher: Blackmagic ATEM 1M/E Constellation HD
- T-Cam Software: PC software with a license for control of 2 cameras
- Blackmagic Micro Converter SDI to HDMI
IP-CAM 50 Camera & License [71.98.1304]
Adds another camera and a camera license. Up to 2 packages may be ordered for
a maximum of 4 cameras.
- 1 IP-CAM 50 Camera
- Camera interconnection cables
- 1 license for one additional camera
T-Cam Name Overlay [71.98.1302]
This add-on allows an overlay to be added onto the video output by using an
additional capture card.
- 1 license for name overlay
- Capture card: Blackmagic DeckLink Mini Recorder
Global Features
T-Cam is built for seamless integration with Televic Conference systems and allows a number of features out of the box.
- I integrate perfectly with D-Cerno, Plixus engine, CoCon, Confidea G3, and Confidea G4.
- Creation of a synoptic for easy configuration of camera positions
- 2 shots per seat
- 2 shots for the wide shot
- Multiple seat configurations immediately available for flexible seating arrangements
- Configuration of camera positions can be done with the software or with a USB joystick (not included in any of the packages)
- Camera control over a serial connection and IP connection
- 20× Optical zoom on cameras
- Software may be upgraded to webcasting software
Product Features
- Full HD PTZ Camera
Camera
- The T-Cam solution is a dynamic PTZ camera tracking solution ideally suited for conference room settings. With Full HD 1080p output at 60 fps, the camera provides excellent images. Additionally, the 20× zoom, outstanding white balance, and exposure mode bring even the smallest details into focus, especially in darker conference rooms where lighting conditions may be poor.
- With a wide viewing angle (horizontal -170° to +170°, tilting up to 90° and down to -30°) and fast response, and smooth operation, the camera captures every move securely.
- Finally, the 3G-SDI interface allows for crystal-clear and uncompressed video without delays. Combined with Televic Conference’s Plixus network, working with high-quality, lipsynced video becomes a joy.
Blackmagic DeckLink Mini
- Capture Card
Blackmagic ATEM 1/M Constellation HD
- Video Switcher
- The Blackmagic ATEM video switcher puts a host of video-switching options easily at your fingertips. It includes 10 3G-SDI video inputs to convert any 1080p input source, making it ideal to use with the T-Cam cameras. It includes a large LCD front panel to see program output and change the switcher settings via the on-screen menu.
T-Cam Camera Control
- Software
- Configure camera positions, assign name overlays (separate license required), set up 2 shots per seat, wide shots, etc.
- Manual override is available.
Blackmagic Micro Converter SDI to HDMI
- HDMI converter
System Requirements
Recommended PC requirements:
- Desktop PC with at least 1 PCI slot. 2 PCI slots, if both preview and overlay are required.
- Windows 7, 8, and 10 supported
- Serial COM port (USB to Serial converter can be used as well) when not used with an IP connection
- PoE switch when used with an IP connection
A Standard USB joystick can be connected for camera control. Recommended joystick: Axis T8310.
Specifications
T-CAM Camera Tracking Package
Mechanical
Size (mm)| 570 x 300 x 420
Weight| 11400g
IP-CAM50
Technical & Electrical
Sensor| 1/2.8” 2 MP CMOS
Video Output| 1080p 60 / 59.94 / 50 fps,
1080i 60 / 59.94 / 50 fps,
1080p 30 / 29.97 / 25 fps,
720p 60 / 59.94 / 50 fps
Optical Zoom| 20×
Panning Angle| -170° ~ +170°
Tilting Angle| -30° ~ +90°
Preset Positions| 128
Video Output(HD) Interface| 3G-SDI
PoE| PoE+ (IEEE802.3at)
Camera Control Interface| RS-232 / RS-422 / Ethernet
Camera Control Protocol| VISCA / PELCO D
Video S/N Ratio| > 50dB
Shutter Speed| 1/1 ~ 1/10,000 sec
Focal Length| f = 4.7 ~ 94 mm
3D NR| Yes
---|---
Horizontal Viewing Angle| 63°
Aperture| F1.6 ~ 3.5
Minimum Illumination| 1.0 lux (F1.6, 50 IRE, 30fps)
Minimum Object Distance| 1.2m
Gain Control| Auto, manual
White Balance| Auto, indoor, outdoor, one-push, manual
Exposure Control| Auto, manual
Focus System| Auto, manual
Image Flip| Yes
Audio Input| Line In / MIC In
Audio Output| Ethernet, SDI, and HDMI
Blackmagic ATEM 1/M Constellation HD
Technical & Electrical
Power Supply| 1 x Internal 100 – 240 AC
Power Usage| 36 W
Dimensions| 28 x 4.4 x 17.6 cm
Connections
Total Video Inputs| 10
Total Video Outputs| 6
SDI Rates| 1.5G, 3G
Total Audio Inputs| 2 x balanced 1/4 inch Jack 1 x 5 pin XLR Talkback
Total Audio Outputs| 1 x 5 pin XLR Talkback
SDI Audio Inputs| 4 x 10-bit SD/HD switchable. 2-channel embedded audio.
SDI Audio Inputs| 2 Ch embedded audio on all SDI inputs
SDI Audio Outputs| 2 Ch embedded audio on all SDI outputs
Reference Input| Tri-Sync or Black Burst
Video Input Re-Sync| On all 10 inputs
Frame Rate and Format Converters| On all 10 inputs
SDI Aux Outputs| Any of the 6 SDI outputs
SDI Preview Outputs| Any of the 6 SDI outputs.
SDI Program Output| Any of the 6 SDI outputs
Webcam Output| 1 x USB-C supporting 720p or 1080p at PGM frame rate
Total Multi Views| 1 x 3G-SDI
---|---
Control Panel Connection| Ethernet. Direct connection between panel and
chassis, or via network.
Internal Timecode Generator| Yes
Talkback| RJ45 for 3rd party talkback systems
Ethernet| 10/100/1000 BASE-T
Computer Interface| 1 x USB-C supports USB
3.1 Gen 1 (5Gb/s)
Standards
SD Video Standards| None
HD Video Standards| 720p50, 720p59.94,
720p60, 1080i50,
1080i59.94, 1080i60
1080p23.98, 1080p24,
1080p25, 1080p29.97,
1080p30, 1080p50,
1080p59.94, 1080p60
SDI Compliance| SMPTE 292M, SMPTE 296M, SMPTE 424M,
SMPTE 425M level A and B
Video Sampling| 4:2:2
Color Precision| 10-bit
Color Space| REC 709
SDI Auto Switching| Automatically detects be- tween 1.5G-SDI and level A or
level B 3G-SDI
Display
Front panel| Built-in 2.2” LCD monitor for video, 10 LED buttons for setup and
emergency switching, 4 source but- tons, 6 talkback selection and mix buttons,
menu control knob, set button, front panel lock button.
Environmental
Operating Temperature| 0° to 40°C (32° to 104°F)
Storage Temperature| -20° to 60°C (-4° to 140° F)
Relative Humidity| 0% to 90%
non-condensing
All information copyright Televic Conference, 2022.
- Televic reserves the right to change this document without notice.
- Version 2.1, 24 August 2022
Televic Conference
- Leo Bekaertlaan 1
- 8870 Izegem, België
- +32 51 30 30 45
- [email protected].
- www.televic-conference.com.