WALTHER EFC3r EDC Flashlight Instruction Manual
- June 12, 2024
- WALTHER
Table of Contents
WALTHER EFC3r EDC Flashlight Instruction Manual
EDC FLASHLIGHT
PARTS DESCRIPTION
- Reflector housing
- Mode Switch
- Charging status indicator
- Battery compartment
- Screw cap
- Power Switch
Technical data
| MODE | Turbo |
|---|---|
| LED CHIP | Luminus SST40 |
| COLOUR TEMPERATURE | 5.000 k |
| BATTERY | 21700 Li-Ion 3,7 V |
| MAX. BEAM RANGE | 180 m |
| PROTECTION LEVEL | IPX8 / 1,5 m |
| LENGTH | 137 mm |
| DIAMETER (HEAD/HOUSING) | 25,4 mm |
| WEIGHT | 170 g |
| MODE| |
---|---|---|---
1 x 21700| Turbo| 3000| 2h
High| 1000| 4h
Medium| 200| 13h
Low| 50| 55h
Ultra Low| 10| 110h
Beacon| 3000| 80h
These are measurement values that were determined in a laboratory and are subject to natural tolerances that depend on various other conditions (e.g. temperature, battery type)
Operation
Starting with previously used brightness level
Half press and hold for “momentary light” (starting with preciously used
brightness level)
Changing the batteries
Charging
Low battery indicator: White LED flashes once per minute when battery reach
25%
Operation
We reserve the right to make color and design changes and technical improvements. No responsibility is accepted for printing errors or incorrect information.
Costumer Support
UMAREX GMBH & CO. KG
Donnerfeld 2 ∙ 59757 Arnsberg ∙ Germany
service@umarex.de
www.umarex.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>