POWER MECH TEPX1 WiFi Temperature and Humidity Sensor with Screen User Manual
- June 12, 2024
- POWER MECH
Table of Contents
**POWER MECH TEPX1 WiFi Temperature and Humidity Sensor with Screen User Manual
**
Thanks for choosing our Product
!You can real-time monitor the temperature and search “Smart Life™ app in Google Play Store or | of homepage or click “Add Device” . humidity on the screen directly.
Please kindly read the user manual carefully b, You have input the cormect Wi- Fi password J – before usage and keep it for future reference.
Product Presentation
Specification
- Size: 65%65%17mm
- Micro Input: DC 5V/1A
- LED Indicator: Blue
- Wi-Fi Protocol: 2.4GHz
- Wi-Fi Standard: IEEE 802.11 b/g/n
- Temperature and authentication code. Measure Range: 0 C~ 60C
- Temperature Accuracy: +1C
- Humidity Measure Range: 0% RH~99% RH
- Humidity Accuracy: £5% RH
Checklist before using the device
a. Your smartphone has connected ta n 2464z Wi Fi NETWORK.
b. You have input the cormect Wi-Fi password
c. Tg‘;rgrgf”phone must be Android 4.4 + or IOS 8.0+.
d. Your Wi-Fi router is MAC-open.
e. If the numbers of devices connected to Wi-Fi H router reach the
limit, you can try to disable a device to cavate the channel or try with
another Wi-Fi router.
How to set up
-
1. Use bl smo(’rp’r)one fo scan QR code, or search “Smart Life™ app in Google Play Store or A7 o 0eownisad and install.
QR CODE
SMART LIFE
-
Create an account with your mobile number LED Install Temperature and authentication code.
-
Connect your mobile to your Wi-Fi router ,supply Wi-Fi Temperaiure & Humld”y 9 P Specification Checklist before using the device: power to the sensor with the supplied Micro charging cable, click “+” in the upper right corner of homepage or click “Add Device” .
-
Turn on the Bluetooth in mobile: Reset Button Stand : The app will advise you to turn on Bluetooth in i T i s our mobile, then you choose the device to add. e Humidity Accuracy: £5% RH Ién’rer into your Wi—Izli name and Wi-Fi password, it Temperature é Humidity will connect the Wi-Fi network automatically.
-
Do not turn on the bluetooth: Select “Temperature and Humidity Sensor(Wi-Fi)” from “Sensors”, enter into the Wi-Fi password, make sure LED indicator is blinking rapidly, if not, please open the stand at the back, hold the reset button for about 5s till LED indicator blink rapidly. it will connect.
- If your Wi-Fi router open both 2.4GHz and 5GHz with the same name, enter Wi-Fi password, please select “AP Mode”, hold the reset button for about 5 seconds till LED indicator blink slowly, connect your mobile to device’s hotspot: “SmartLife-XXXX” then click to return to App interface, it will connect to Wi-Fi automatically ,configuration complete.
Functions
Intelligent Linkage
When the ambient environment change, you can execute intelligent linkage.
For example, when the room temperature surpass 35C ,the air-conditioner will
open automatically, or when the humidity is lower than 20% RH, the humidifier
will spray.
Share devices
You can share your added devices with your family members, so they can also
monitor the ambient environment.
Display on Screen
You can real-time monitor the temperature and humidity on the screen directly.
Temperature Unit Switch
You can switch temperature unit between F and C through press of the reset
button one time.
Third-party Voice Control
Works with amazon alexa, google assistant.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.