ABBA LIGHTING TSR1200 1200W AC Multitap Output Transformer Installation Guide
- June 12, 2024
- ABBA LIGHTING
Table of Contents
TSR1200
INSTALLATION GUIDE
TSR1200 1200W AC Multitap Output Transformer
RATED VOLTAGE 12V
Congratulations on your purchase of this high-quality product! We want to
ensure that you have the best possible experience with it, so we kindly ask
that you take a moment to carefully read and follow all instructions before
assembly, installation, and use. By doing so, you’ll not only guarantee
correct function and safety, but also optimize the full potential of this
exceptional product. Thank you for choosing us as your trusted provider of
top-notch products – we truly appreciate your business!
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
For safety reasons, we recommend that only a qualified professional install
this electrical product.
Before attempting to install this unit, ensure all power connections are off
for your own safety.
Fixture(s) must be installed in accordance with all local codes and
ordinances.
Do not instal within 10 feet of a pool, spa or fountain
DO NOT DISASSEMBLE
To ensure proper functionality and safety, it is important to refrain from
connecting two or more transformers in parallel. It is advised to maintain
individual electrical circuits for each transformer rather than attempting to
combine their outputs. By adhering to this guideline, you can prevent
potential complications and optimize the performance of each transformer.
For optimal performance and safety, it is recommended not to utilize this
device in conjunction with a dimmer switch. Avoid connecting the device to any
dimming mechanism as it may lead to undesirable consequences or
malfunctioning. It is advisable to operate the device without the use of a
dimmer to ensure its intended functionality and prevent any potential risks.
To ensure the highest level of safety, it is recommended to directly plug the
transformer into a Ground Fault Circuit Interrupter (GFCI) outlet. By
utilizing a GFCI outlet, you enhance protection against electrical shocks and
minimize the risk of electrical hazards.
To maintain optimal performance and safety, it is strongly advised against
using an extension cord with this device. It is recommended to directly
connect the device to a properly grounded power outlet. Using an extension
cord may introduce electrical inefficiencies, increase the risk of
overheating, or compromise the device’s functionality. It is best to avoid
extension cords and ensure a direct and secure power connection for the
device.
It is important to note that the maximum output capacity of this transformer
is 1200 Watts. To ensure safe and optimal operation, it is crucial to avoid
exceeding this specified limit. Overloading the transformer by drawing power
beyond its maximum capacity can lead to overheating, reduced efficiency, and
potential damage to the device. It is highly advised to carefully monitor the
power requirements of your equipment and ensure they fall within the specified
limits of the transformer to maintain its performance and longevity.
WARRANTY
-
We stand behind the quality of our product and offer a 2-year warranty from the date of purchase.
Please note that the warranty is valid from the date of purchase, not from the date of installation.
Kindly ensure that you keep the proof of purchase as it will be required for any warranty claims. -
Warranty will be void if there is any damage due to improper usage or modification to the fixture.
-
Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void warranty.
We assure you that this transformer is designed with utmost consideration for safety, making it suitable for both indoor and outdoor applications. You can confidently utilize this transformer in various environments without any concerns about compromising safety standards. Moreover, it is essential to note that this transformer is specifically engineered to be weatherproof, offering enhanced protection against the elements. This means that you can rely on its performance and durability even when exposed to challenging weather conditions. Whether you are working on a project indoors or venturing into outdoor settings, this transformer provides a secure and dependable solution for your electrical needs. To ensure proper installation of the transformer, it is essential to position it at a level where the controls are readily visible and easily accessible. This ensures convenient operation and maintenance of the transformer. When selecting the installation location, carefully consider factors such as line of sight and ergonomic accessibility. By placing the transformer at an appropriate level, you will be able to monitor and adjust its settings with ease, facilitating efficient and effective usage. Prioritizing the visibility and accessibility of the controls when installing the transformer contributes to a user-friendly and ergonomic setup.
MOUNT THE INSTALLATION
To mount the transformer on a wall near an electrical outlet, carefully follow these step-by-step instructions:
- Choose a suitable location on the wall near the electrical outlet where you intend to install the transformer. Ensure that the chosen spot allows for easy access to the outlet and is appropriate for the weight and size of the transformer.
- Hold the transformer against the wall at the desired mounting height. Position it in a way that aligns with the electrical outlet and any necessary connections.
- With a pencil or marker, mark the spots on the wall where the screw holes of the transformer will align. These marks will serve as a guide for secure mounting.
- Obtain appropriate screws that are compatible with the wall material and the transformer’s mounting holes. Generally, wall anchors may be necessary for mounting on drywall or other fragile surfaces. If unsure, consult a hardware store or professional for suitable mounting hardware.
- Using a suitable screwdriver or drill, carefully insert the screws through the mounting holes of the transformer and into the marked spots on the wall. Ensure that the screws are driven straight and fully into the wall, providing a secure hold.
- Once the screws are tightly secured, verify that the transformer is firmly mounted on the wall by giving it a gentle tug or shake. Ensure that it does not move or feel loose.
Please ensure that you do not exceed the capacity of the transformer as it can
lead to overheating and overload, potentially reducing its lifespan. It is
recommended to utilize only up to 85% of the transformer’s capacity.
To mitigate voltage drops effectively, it is advisable to employ the 13V, 14V
& 15V block. This particular device ensures a stable and consistent voltage
supply, minimizing any potential reduction in voltage levels throughout the
electrical system. By utilizing it, you can maintain a reliable power flow and
prevent any undesirable fluctuations that could impact the performance or
functionality of connected devices.
To prepare the landscape
wire for connection, follow these simple steps:
-
Strip 1/2 inch of insulation from both wires.
-
Twist the exposed ends of the wires together tightly.
To connect the wires to the transformer, please carefully follow these step- by-step instructions: -
Carefully position the wires underneath each terminal plate and proceed to secure them firmly by tightening the screws.
After connecting the wires to the terminal blocks, it is vital to verify that they are securely and properly positioned. Follow these steps to ensure a secure connection and complete the installation:
- Carefully inspect the terminal blocks to confirm that the wires are fully inserted and tightly secured within their respective terminals. Make sure there are no loose or exposed wires.
- Gently tug on each wire to ensure it is firmly held in place and does not come loose. This step helps verify the stability of the connections.
By following these instructions, you will guarantee that the wires are securely placed within the terminal blocks, minimizing the risk of disconnections or electrical issues. Additionally, closing the casing properly provides protection to the internal components of the transformer.
RUN THE LANDSCAPE WIRE (SOLD SEPARATELY)
To ensure proper installation of the landscape wire, please follow these guidelines:
- When running the landscape wire, make sure it extends directly from the transformer to each light without any cuts or interruptions. This uncut wire connection helps maintain a consistent and reliable electrical flow throughout the lighting system.
- Exercise caution and avoid running the wire within a proximity of 10 feet (3 meters) to any pools, spas, or fountains. This safety measure prevents any potential hazards associated with water and electrical components. It is important to prioritize the safety of individuals and the proper functioning of the electrical system.
- In the event that the landscape wire is longer than needed, you may need to trim it to the appropriate length. To cut the wire, use a cable cutter specifically designed for this purpose. Ensure that the cable cutter is suitable for the wire’s gauge and thickness. Following the manufacturer’s instructions, carefully cut the wire to the desired length.
- By adhering to these instructions, you will ensure the integrity and safety of the landscape wire installation. The wire should remain uncut as it runs from the transformer to each light, while maintaining a safe distance from pools, spas, or fountains. If necessary, use a cable cutter to trim the wire to the required length.
When selecting the cable gauge, consider the distance between the transformer
and the lighting fixtures. it is crucial to choose an appropriate gauge to
ensure efficient power transmission and minimize voltage drop.
Please note that this chart provides general recommendations, and it is
essential to consider specific factors such as the power requirements of your
lighting system and any local electrical codes or regulations that may apply.
Consulting with a qualified electrician can provide further guidance and
ensure the proper selection of cable gauges for your specific installation.
HOW TO CHOOSE THE RIGHT LOW VOLTAGE WIRE:
- LOWER GAUGE WIRES ARE THICKER AND CONTAIN MORE COPPER. THEY HAVE A GREATER CURRENT CARRYING CAPACITY FOR LONG RUNS
- ITS BEST TO NOT EXCEED MORE THAN 80% OF YOUR LANDSCAPE WIRE CURRENT CAPACITY TO ENSURE THERE IS NO VOLTAGE DROP
EXAMPLE: IF YOUR TOTAL WATTAGE OF YOUR LANDSCAPE LIGHTS IS 40 WATTS, THEN YOU CAN RUN 200 FEET OF 12 GAUGE WIRE WITHOUT VOLTAGE DROP.
POWER UP THE TRANSFORMER
To test the fixtures and change the mode to “ON,” please follow these instructions:
- Take the plug of the transformer and insert it into the GFCI plug. Make sure it is fully inserted and securely connected.
- Once the transformer is plugged into the GFCI plug, you can proceed with testing the fixtures. Turn on the power to the transformer.
- Set the mode switch to the “ON” position. This will activate the fixtures and provide a continuous power supply.
Observe the connected fixtures to verify that they are illuminated and functioning correctly. Check for any signs of flickering, dimness, or matfunctions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>