NOBLE HOUSE 109237 Artificial Tree Instruction Manual
- June 12, 2024
- Noble House
Table of Contents
NOBLE HOUSE 109237 Artificial Tree
Product Information
The Artificial Tree is a product manufactured by Noble House Home Furnishings
LLC. It consists of multiple parts, including the Bottom Tree Trunk, Middle
Tree Trunk & Branches, Side Branches, and Highest Branches. The tree is
designed to be assembled and used on a flat, level surface. The assembly
process may take up to 30 minutes.
Assembly Instructions
- Place all parts on a soft surface to avoid scratches or damage.
- Attach the Middle Tree Trunk & Branches(B) to the Bottom Tree Trunk(A) by inserting the iron tube on the Middle Tree Trunk & Branches(B) into the mounting position on the Bottom Tree Trunk(A). Make sure to match label 1 on both parts before inserting.
- Shape the tree branches of the Middle Tree Trunk & Branches(B) before assembling.
- Attach the Side Branches(C) to the Bottom Tree Trunk(A) by inserting the iron tube on the Side Branches(C) into the mounting position on the Bottom Tree Trunk(A). Match the label 2 on both parts before inserting. Shape the tree branches of the Side Branches(C) before assembling.
- With the assistance of another adult, attach the Highest Branches (D) to the Middle Tree Trunk & Branches(B) by inserting the iron tube on the Highest Branches (D) into the mounting position on the Middle Tree Trunk & Branches(B). Match the label 3 on both parts before inserting. Shape the tree branches of the Highest Branches (D) before assembling.
- Inspect and ensure that all parts are connected, locked, and fully secured into position.
- The Artificial Tree is now ready to be used on a flat, level surface.
Care & Maintenance
To clean the Artificial Tree, dust and pick up spills using a clean, non-
colored, lint-free cloth.
Caution: You must read this before you proceed
ARTIFICIAL TREE
Part List
Assembly Preparation
Before Beginning Assembly
Assembly Steps
Overview
This Artificial Tree has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Artificial Tree parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and
steps before assembling.
Step1
Place all parts on a soft surface to avoid any scratches or damage to the
product. Attach the Middle Tree Trunk & Branches(B) to the Bottom Tree
Trunk(A) by inserting the iron tube on the Middle Tree Trunk & Branches(B)
into the mounting position on the Bottom Tree Trunk(A).
Note: Match up the label “1” on the Middle Tree Trunk & Branches(B) and
the Bottom Tree Trunk(A) before inserting.
Note: Shape the tree branches of the Middle Tree Trunk & Branches(B)
before assembling.
Step2
Attach the Side Branches(C) to the Bottom Tree Trunk(A) by inserting the iron
tube on the Side Branches(C) into the mounting position on the Bottom Tree
Trunk(A).
Note: Match up the label “2” on the Side Branches(C) and the Bottom Tree
Trunk(A) before inserting.
Note Shape the tree branches of the Side Branches(C) before assembling.
Step3
With assistance from a second adult, attach the Highest Branches (D) to the
Middle Tree Trunk & Branches(B) by inserting the iron tube on the Highest
Branches (D) into the mounting position on the Middle Tree Trunk &
Branches(B).
Note: Match the label “3” on the Highest Branches (D) and the Middle Tree
Trunk & Branches(B) before inserting.
Note Shape the tree branches of the Highest Branches (D) before
assembling.
Step4
Inspect and make sure all parts are connected, locked and fully secured
into position. The Artificial Tree is ready to be used.
This Artificial Tree can only be used on a flat, level surface.
Note : It is recommended to heat the labels with a hairdryer and then
tear them off to avoid leaving gel marks on the tree.
Care & Maintenance
Noble House Home Furnishings LLC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>