KARCHER K 2 Classic Cleaning Equipment and Pressure Washers User Manual
- June 12, 2024
- Karcher
Table of Contents
- KARCHER K 2 Classic Cleaning Equipment and Pressure Washers
- Product Information
- Product Usage Instructions
- Technical Specifications
- Safety Devices
- Assembly
- Operation
- Storage
- Care and maintenance
- Troubleshooting
- Warranty
- Technical specifications
- EU Declaration of Conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KARCHER K 2 Classic Cleaning Equipment and Pressure Washers
Product Information
- Product Name: K 2 Classic
- Product Registration: To register your product, visit www.kaercher.com/welcome
- Languages Available: Deutsch, English, Italiano, Nederlands, Dansk, Norsk, Svenska, Suomi, Magyar, Cestina, Slovenscina, Polski, Slovencina, Hrvatski, Srpski, Eesti, Latviesu, Lietuviskai
- Contents: Safety information, Assembly, Operation, Transport, Maintenance, Warranty, Technical specifications
Product Usage Instructions
Safety
- Familiarize yourself with the safety features and precautions mentioned in the user manual.
- Pay attention to the danger levels associated with the product.
Assembly
- Follow the instructions provided in the user manual for assembly.
Operation
- Connect the product to a water supply from a water pipe. Check the connection values mentioned on the product label or in the technical specifications. Follow the regulations of the water supply company.
- To start the operation, plug in the power cord and turn on the device.
- Use the high-pressure function as required.
- To pause the operation, release the trigger on the high-pressure gun.
- To end the operation, turn off the device and unplug it from the power source.
Transport
- For manual transport, follow the guidelines provided in the user manual.
- When transporting the product in vehicles, ensure secure placement to prevent damage.
- Store the product in a suitable location when not in use.
Maintenance
- Before performing any maintenance tasks, always disconnect the power cord and unplug the device.
- Clean the water connection filter regularly.
- Take necessary precautions for strong pressure fluctuations.
Warranty
Refer to the warranty information provided by the manufacturer for details.
Technical Specifications
- Electrical Connection: 220-240 V 1~50-60 Hz
- Power Consumption: 6A
- Protection Class: II
- Water Inlet Pressure (max.): 1.2 MPa
- Water Inlet Temperature (max.): Not specified
- Water Inlet Quantity (min.): 8 l/min
- Working Pressure: 7.4 MPa to 11 MPa
- Flow Rate: 5.3 l/min to 6.0 l/min
- Weight: 4.1 kg
Safety
Please read these original operating instructions and the enclosed safety
instructions prior to the initial use of your device. Proceed accordingly.
Keep both booklets for future reference or subsequent owners.
Proper use
This high pressure cleaner is designed for domestic use only.
- for cleaning machines, vehicles, buildings, tools, facades, terraces, gardening tools, etc. by means of a high-pressure water jet (if necessary, with additional cleaning agents).
- with accessories, replacement parts and cleaning agents approved by KÄRCHER. Please observe the information accompanying the cleaning agents.
Hazard levels
-
DANGER
Pointer to immediate danger, which leads to severe in-juries or death. -
WARNING
Pointer to a possibly dangerous situation, which can lead to severe injuries or death. -
CAUTION
Pointer to a possibly dangerous situation, which can lead to minor injuries. -
ATTENTION
Pointer to a possibly dangerous situation, which can lead to property damage.
Symbols on the machine
The high pressure jet must not be directed at persons, animals, live
electrical equipment or at the appliance itself.
Protect the appliance against frost.
The appliance must not be directly connected to the public drinking water
network.
Safety Devices
CAUTION
Safety installations serve the protection of the user and may not be modified
or bypassed.
Appliance switch
The appliance switch prevents unintentional operation of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and prevents the inadvertent
start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible working pressure from being
exceeded.
If the lever on the trigger gun is released the pressure switch turns off the
pump, the high pressure jet is stopped. If the lever is pulled the pump is
turned on again.
Environmental protection
Notes about the ingredients (REACH)
You will find current information about the ingredients at:
www.kaercher.com/REACH
The packaging material can be recycled. Please arrange for the environmentally appropriate disposal of the packaging.
Old appliances contain valuable recyclable materials that should be recycled
properly. Please arrange for the environmentally appropriate disposal of the
old devices.
Electrical and electronic devices often contain components which could
potentially pose a danger to human health and the environment if handled or
disposed of incorrectly. However, these components are necessary for the
proper operation of the device. Devices marked with this symbol must not be
disposed of with regular house-hold rubbish.
Cleaning operations which produce oily waste water, e.g. engine washes,
underbody washes, may only be carried out using washing stations equipped with
an oil separator.
Description of the Appliance
The scope of delivery of your appliance is illustrated on the packaging. Check
the contents of the appliance for completeness when unpacking.
Illustrations A
-
Water connection with integrated sieve
-
Coupling element for water connection
-
High pressure connection
-
Appliance switch „0/OFF“ / „I/ON“
-
Storage for spray lance
-
Carrying handle
-
Mains cable with mains plug
-
Trigger gun
-
Lock trigger gun
-
Clamp for high pressure hose
-
High pressure hose
-
Spray lance with high pressure nozzle
For normal cleaning tasks.
** Additionally required -
Fabric-reinforced water hose with commercially available coupling.
- Minimum diameter, 1/2 inches (13 mm).
- Minimum length 7.5 m.
Assembly
Mount loose parts delivered with appliance prior to start-up.
Illustration A
-
Screw the coupling element to the water connection on the appliance.
Illustration B -
Pull out the clamp for the high pressure hose from the trigger gun.
Illustration C -
Connect high pressure hose to trigger gun.
-
Push the clamp in until it locks. Check the secure connection by pulling on the high-pressure hose.
Start up
-
Park the appliance on an even surface.
Illustration D -
Connect the high pressure hose to the high pressure connection of the appliance.
-
Insert the mains plug into the socket.
Water supply from mains
For connection values, see type plate/technical data. Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the high-pressure pump and the accessories.
For protection, the use of the KÄRCHER water filter (optional accessory, order
no. 4.730-059) is recommended.
Illustration E
- Attach the water supply hose to the coupling on the water connection.
- Connect the water supply hose to the water supply.
- Completely open the water tap.
Operation
ATTENTION
Dry running of more than 2 minutes leads to damage of the high-pressure pump.
If the appliance does not build up pressure within 2 minutes, switch the
appliance off and proceed in accordance with the instructions in Chapter
“Troubleshooting”.
High pressure operation
CAUTION
Keep a distance of at least 30 cm when using the jet for cleaning painted
surfaces to avoid damage.
Illustration F
- Push the spray lance into the trigger gun and fasten it by turning it through 90°.
- Turn on the appliance “I/ON”.
- Unlock the lever on the trigger gun.
Pull on the lever of the trigger gun; the device will switch on.
Note: Release the lever of the trigger gun; the de-vice will switch off again. High pressure remains in the system.
Interrupting operation
- Release the lever on the trigger gun.
- Lock the lever on the trigger gun.
- During longer breaks (more than 5 minutes), also turn the appliance off using the “0/OFF” switch.
Finish operation
CAUTION
Only separate the high-pressure hose from the trigger gun or the appliance
when there is no pressure in the system.
- After operation with detergent: Run the machine for approximately 1 minute for a clear rinse.
- Release the lever on the trigger gun.
- Turn off the appliance “0/OFF”.
- Disconnect the mains plug from the socket.
- Turn off tap.
- Press the lever on the trigger gun to release any remaining pressure in the system.
- Lock the lever on the trigger gun.
- Detach the appliance from the water supply.
Transport
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
- Lift appliance by the carrying handle and carry it.
When transporting in vehicles
- Secure the appliance against shifting and tipping over.
Storage
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when storing it.
Storing the Appliance
Prior to extended storage periods, as during the winter, also observe the
instructions in the Care section.
- Park the machine on an even surface.
- Engage the spray lance in its holder.
- Stow the power cord and the remaining accessories on the appliance.
Frost protection
ATTENTION
Appliances and accessories that are not completely drained can be destroyed by
frost. Completely drain appliance and accessories and protect them against
frost. To avoid damage:
- Completely drain all water from the appliance: Switch the appliance on with detached high pres-sure hose and detached water supply (max. 1 min-ute) and wait, until no more water exits at the high pressure connection. Turn off the appliance.
- Store the appliance and the entire accessories in a frost free room.
Care and maintenance
DANGER
Risk of electric shock.
- Prior to all work on the appliance, switch off the appliance and pull the power plug.
Clean the sieve in the water connection
Clean the sieve in the water connection regularly.
-
Remove coupling from the water connection.
ATTENTION
The sieve must not be damaged.
Illustration G -
Pull the sieve out using flat pliers.
-
Clean the sieve under running water.
-
Reinsert the sieve into the water connection.
Troubleshooting
You can rectify minor faults yourself with the help of the following overview.
If in doubt, please consult the authorized customer service.
DANGER
Risk of electric shock.
- Prior to all work on the appliance, switch off the appliance and pull the power plug.
Appliance is not running
- Pull on the lever of the trigger gun; the device will switch on.
- Check whether the voltage indicated on the type plate corresponds to the voltage of the mains sup-ply.
Check the mains connection cable for damages.
Appliance does not start, motor hums
Voltage reduction due to weak mains supply or when using an extension cable.
- When switching on, first pull the lever of the trigger gun and then switch the appliance switch to “I/ON”. When switching on, first pull the lever of the hand spray gun and then switch the appliance switch to “I/ON” or “eco”.
Pressure does not build up in the appliance
- Check water supply for adequate delivery rate.
- Pull out the sieve in the water connection using flat-nose pliers and clean under running water.
- Appliance ventilation: Switch the appliance on with the high-pressure hose detached and operate (max. 2 minutes) until the water exits the high-pressure connection without bubbles. Switch off appliance and reconnect high-pressure hose.
Strong pressure fluctuations
- Clean high-pressure nozzle: Remove dirt and de-bris from the nozzle bore, using a needle and rinse through with water from the front.
- Check water flow quantity.
Appliance is leaking
- Slight leakage from the appliance pump is normal. If the leakage increases contact the authorized customer service.
Accessories and Spare Parts
Only use original accessories and spare parts, they ensure the safe and
trouble-free operation of the device. For information about accessories and
spare parts, please visit www.kaercher.com.
Warranty
The warranty terms published by the relevant sales company are applicable in
each country. We will repair potential failures of your appliance within the
warranty period free of charge, provided that such failure is caused by faulty
material or defects in manufacturing. In the event of a warranty claim please
contact your dealer or the nearest authorized Customer Service centre. Please
submit the proof of purchase.
Addresses can be found under:
www.kaercher.com/dealersearch
Technical specifications
Electrical connection
- Voltage 220-240 1~50-60 V Hz
- Power consumption 6 A
- Protection class IPX5
- Protective class II
- Mains fuse (slow-blow) 10 A
- Water connection
- Max. feed pressure 1,2 MPa
- Max. feed temperature 40 °C
- Min. feed volume 8 l/min
Performance data
- Working pressure 7,4 MPa
- Max. permissible pressure 11 MPa
- Water flow rate 5,3 l/min
- Max. flow rate 6,0 l/min
- Recoil force of trigger gun 11 N
Dimensions and weights
- Length 393 mm
- Width 171 mm
- Height 243 mm
- Weight, ready to operate with accessories 4,1 kg
Values determined as per EN 60335-2-79
- Hand-arm vibration value Uncertainty K <2,5 0,3 m/s2 m/s2
- Sound pressure level LpA
- Uncertainty KpA 75 3 dB(A) dB(A)
- Sound power level LWA + Uncertainty KWA 91 dB(A)
Subject to technical change
EU Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.
Product: High pressure cleaner
Type: 1.600-xxx
Relevant EU Directives
2000/14/EC
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Applied harmonized standards
EN 50581
EN 55014–1:2017
EN 55014–2: 2015
EN 60335–1
EN 60335–2–79
EN 61000–3–2: 2014
EN 61000–3–3: 2013
EN 62233: 2008
Applied conformity evaluation method 2000/14/EC: Appendix V
Sound power level dB(A)
Measured: 89
Guaranteed: 91
The signatories act on behalf of and with the authority of the company management.
Chairman of the Board of Management Director Regulatory Affairs & Certification
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG Alfred-Kärcher-Straße 28-40 71364 Winnenden
(Germany) Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/08/01
THANK YOU
Register your product and benefit from many advantages
www.kaercher.com/welcome
Rate your product and tell us your opinion
www.kaercher.com/service
Alfred Kärcher & Co. KG Alfred-Kärcher-Str. 28-40 71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
References
- Make choice for purchasing this domain - Domeinenbank
- komplet.se
- Cleaning equipment and pressure washers | Kärcher International
- Reinigungsgeräte und Hochdruckreiniger | Kärcher