HILTI X-BT-MR Stainless Steel Threaded Studs Threaded Studs and Standoffs Instructions
- June 12, 2024
- HILTI
Table of Contents
HILTI X-BT-MR Stainless Steel Threaded Studs Threaded Studs and Standoffs
Product Information
- Product Name: Hilti Threaded Studs
- Model Number: X-BT-MR M6/10 SN 8, X-BT-MR W6/10 SN 8
- Manufacturer: Hilti AG
- Address: FL-9494 Schaan, Liechtenstein
- Product Type: Threaded studs for connection of materials to structural steel
- Type Approval: Yes
- Corrosion Resistance: Equivalent to Corrosion 316
Product Usage Instructions
- Use the threaded studs for connecting materials to structural steel.
- Ensure that the product is within a distance of 0-1km from the intended application.
- Refer to the Hilti Corrosion handbook or DFTM for additional information on corrosion resistance.
- Select the appropriate stud type based on the material and application:
- X-BT-MR M6/10 SN 8: Suitable for use with SF BT 22-A, SF BT 18-A, DX 351-BT, M6 X-IG BT tools. Torque: 14.8 ft lb.
- X-BT-MR W6/10 SN 8: Suitable for use with SF BT 22-A, SF BT 18-A tools. Torque: 14.8 ft lb.
- Ensure the recommended drill hole diameter and depth:
- X-BT: Drill hole diameter should be 26.8 mm for SF BT 22-A and SF BT 18-A tools. Drill hole diameter should be 25.7 mm for DX 351-BT and M6 X-IG BT tools.
- Insert the threaded studs into the drilled holes.
- Use the inclination gauge to ensure proper alignment if required.
- Tighten the threaded studs using the appropriate torque:
- SF BT 22-A, SF BT 18-A: Torque range should be between 16-20 Nm.
- DX 351-BT: Torque should be 20 Nm / 14.8 lb-ft.
- M6 X-IG BT: Torque should be 20 Nm / 14.8 lb-ft.
- Verify the maximum load capacity:
- For X-BT-MR M6/10 SN 8: Maximum load capacity is 150 N.
Product Instruction
How To Use?
Assembly Procedure
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>