Lighthouse Technologies Limited ST-1362FH All In One LED Display Instruction Manual
- June 12, 2024
- Lighthouse Technologies Limited
Table of Contents
Lighthouse Technologies Limited ST-1362FH All In One LED Display
Technical Data
Type | ST-1362FH |
---|---|
Material | Aluminum profile,Steel |
Surface Finish | Coating matte black |
Recommended Screen Size | 80” – 140” |
Rated Weight Capacity | 441lbs/ 200kg (Overall) |
Max Hole Pattern | 750x750x750mm-1062mm |
Lift range | 490mm |
Voltage | 100~240v |
Certification | CB,CE,FCC,ETL,RoHS2.0,REACH |
Stand dimension(with frame) | 255.6 x 72.3 x 192cm |
Woodencase Dimension | 182 x 141 x 71 cm |
Weight (Net/Gross) | 77.8kg/184.5 |
PRODUCT HIGHLIGHTS
- Smooth anodized dual columns with adjustable flat-panel TV height.
- With exclusive patent technology hanging back frame.
- The safe and quiet remote control lifting function can make your TV lift 490MM at will
- High tensile strength steel and rigid aluminum alloy materials.
- Integrated cable management through columns.
- Carry maximum load 441lbs(200kgs) and up to 140” flat panel TV
- Flexible and installer-friendly.
Caution
- This stand is designed for LAEC015-GN screen. Use with other equipment may result in instability causing injury
- Manufacturer’s name: Lighthouse Technologies (HuiZhou) Limited
- Model number: ST-1362FH
- Equipment name: Motor stand
Dimension
Warning
CHECKLIST
Item| Photo| Qty| Description| Item| Photo|
Qty| Description
---|---|---|---|---|---|---|---
1| | 1| Stand base| 2|
| 1| The main body
3| | **| | 1| Left panel mounting assembly
4| | **| | 1| Right panel mounting assembly
5| | | Beam reinforce plate| 6| | 10| Cable cover
7| | | Socket head cap screw – M8X40| 8| | 32| Screw-
M4x15
9| | | Hexagon socket head screw M6X20| 10| | 1| Hex
key -#6
Installations Instructions
Step1. Install the main body to the stand base.
Front View
Use 8pcs M8X40 hexagon socket head cap screws (item 7) to install the stand base .
Step2. Install the panel mounting plate.
Front View
Put the left (item 3) and right (item 4) halves
Insert the beam reinforce plate(item 5) to fixing the screw hole position.
Tighten the beam reinforce plate with 32-M4x15 screw (item 8) as the red
circle marked.
Step3. Install the panel mounting plate to the main body.
Front View
Hang the assembled back frame to the corresponding buckle points of the stand.
Step4. Lifting cable routing.
Plug the power supply in after installing the Panel as below
If you would like to hide the lifting cable.
Please install the cover as Pic 1 and 2.
The cable can be hidden under this cover.
Packaging
NOTE: The picture is schematic diagram. Everything is subject to the infact
products.