RYOBI RY40702 40V HP Brushless 18 Inch Rear Tine Tiller User Guide
- June 12, 2024
- RYOBI
Table of Contents
RYOBI RY40702 40V HP Brushless 18 Inch Rear Tine Tiller
QUICK REFERENCE GUIDE
- Install the handle
- Connect wire assembly
- Install the bull bar using the wrench provided.
- Attach ballast tank.
- Install the wheels. Align the hole in the wheel with the hole farthest from the end of the axle.
- Install the side panel
- Adjust side panels.
- Install the depth bar.
- Install depth bar handle.
STARTING THE UNIT
- Install at least two 40V batteries on either the left side (PAIR A) or the right side (PAIR B)
- Insert the start key with the arrow facing a pair of charged battery packs
- Press and hold the start button. Pull the bail toward the handle and release the start button when the motor and tines starts
Make the most of your purchase! Go to
www.ryobitools.com and register your new tool
online.
For questions about operating or maintaining your product please call,
1-800-525-2579.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>