POSIFLEX RT-2015-G2 Fanless Touch POS Terminal User Manual

POSIFLEX RT-2015-G2 Fanless Touch POS Terminal User Manual

Package Contents

• RT-2015-G2 15” fanless touch terminal or RT-2016-G2 15.6” fanless touch terminal (x 1)
• Power adapter (x 1)
• Power cord (x 1)
• User manual (x 1)

16950906010 Ver. A0
http://www.posiflex.com

SOME IMPORTANT NOTES

FCC NOTES
This system meets industry & government requirements and applicable standards. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians. The user should consult his/her dealer for the problem happening. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.

BATTERY CAUTION NOTES

• Dispose of used batteries according to the instructions.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types)
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Views of RT-2015-G2/RT-2016-G2

Front View

Rear View

Bottom View

Left-Side View

Views of RB-5000 UPS Base Stand (Option for RT Series Model)

To get more detailed information of RB-5000, please contact the service team of Posiflex or download the RB-5000 user manual from Posiflex Global Website: (http://www.posiflex.com/en-global/Download/download).

View of I/O Interface of RT-2015-G2/RT-2016-G2

Positioning your POS for a Perfect Viewing Angle
Steady the base with one hand, and then tilt the screen in the direction shown by the arrow in the figure. Please do NOT press on the LCD panel while setting up the tilt angle.

Installing Power Adapter and Cables
The following provides instructions required to install your cables.

1. Lay the terminal with its rear facing towards you and tilt the screen all the way down.

2. Remove the system back cover.
2.1 If the system back cover is fire-resistant, first locate the screw as indicated in the figure, and then remove it.

2.2 Hold down the release lever at the bottom of the system back cover and then pulling the cover outwards.

3. To remove the stand cover from the base, grab the top side of the cover, (1) lift the stand cover up gently, (2) pull it at a 45 degree angle, and then (3) slide it in the horizontal direction shown by the arrow.

4. Connect the connector of the power adapter to the DC-IN power jack. If necessary, properly insert other cables into the correct port.

5. Neatly arrange the cables. Locate the cable holder inside the base as shown in the figure. Push down the lever to release if from the hook, pass the cable through cable holder, and then press down the lever again to lock it onto the hook.

6. Make sure the cord can be held into place and passed through the cable exit after sliding back the stand cover.

7. 7.1 Place back the system back cover. Make sure it is well locked into place with a click sound.

7.2 For the fire-resistant system back cover, please insert another screw into the screw hole indicated in the figure, and secure it.

8. Make sure the cable could be pulled out of the cable exit from the bottom of the base.

Cable connectors like the connector of LAN cable have to be gently inserted until a click sound is given. It is recommended that the I/O ports, such as COM (DB9) port and VGA port, should be fastened with connector thumb screws after the I/O cable connectors are completely connected. And please make sure that each connector has to be connected to the right peripheral device in the right way.

CAUTION: On doing insertion or extraction of a cable connector, please always hold the connector head itself instead of pulling the cable wire. Doing this could damage the cables, which is considered as an artificial damage and is not covered by the warranty. The means of power cord should be connected to a socket-outlet with earthing connection.

Installing Optional Upgrade Kits and Peripherals

RT-2015-G2/2016-G2 is an expandable model which allows you to upgrade its own capacity by additionally installing multiple peripheral devices, such as magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2nd rear- mount POS monitor, according to your preference. The following will give you brief instructions on how to expand on your current POS system with these optional upgrade kits. Before proceeding with the installation of peripherals, please make sure the POS system is completely shut down to prevent damage.

Installing Side Mount Upgrade Kits
Located at left side on the back of your system unit, side mount compartment is mainly used for installation of side-mounted equipment, such as magnetic stripe reader. For detailed installation instructions, please refer to the user manual specific to the device which you intend to mount onto the terminal.

Installing Rear-Mount POS Monitor
RT-series POS terminal also allows you to additionally install rear-mount POS monitor to expand its functionality. Regarding the step-by-step instructions which aim to help you mount it onto your POS system, Please refer to the user manual specific to the device you intend to install.

Installing Powered USB or USB Hub
Please go through the below steps to complete the installation of Powered USB or USB hub.
1. After tilting the screen all the way down, remove the system back cover.
1.1 If the system back cover is fire-resistant, first locate the screw as indicated in the figure, and then remove it.

1.2 Hold down the release lever at the bottom of the system back cover and then pulling the cover outwards

2. To remove the stand cover from the base, grab the top side of the cover, (1) lift the stand cover up gently, (2) pull it at a 45 degree angle, and then (3) slide it in the horizontal direction shown by the arrow.

3. Align the two screw bolts at the bottom of PoweredUSB or USB hub with rail slots in the base.

4. Push Powered USB or USB hub in the direction shown by the arrow to lock it into place.

To remove the PoweredUSB or USB hub from the rail slots, press down the hubs first and then push it outwards.

5. Install power adaptor extension cable, USB cable, and power adaptor for PoweredUSB hub.

Status LED Indicator

LED status indicator, which is located at the bottom edge of the LCD panel, is mainly responsible for notifying users of the current system status by emitting various LED signals. In the chart provided below, it describes all the possible LED status as a quick reference.

Powering ON/OFF RT-2015-G2/2016-G2

Power ON RT-2015-G2/2016-G2
Press down the power button to power on the POS.

Power OFF RT-2015-G2/2016-G2
In most cases, press the power button of the POS to power the system off. If the terminal fails to turn off the machine for unknown reasons, please be advised to hold the power button more than 10 seconds to force a shutdown of the system.

Installing an Operating System
You are highly advised not to install an operating system on RT-2015-G2/2016-G2 without professional instructions. Improper installation could lead to system malfunction or failure. Please contact with your dealers about the issues of operating system installation.

Performing System Recovery
For RT-2015-G2/2016-G2 model with preloaded operating systems, Recovery DVD which includes useful utilities will be provided in the package to assist you in efficiently restoring or repairing your damaged system. However, you are not encouraged to recover your system without the help of system integrators. Please be advised to contact your service center for further assistance with system recovery.

Operation Environment
To prevent RT-2015-G2/2016-G2 from overheating, it is suggested to position your terminal in a well-ventilated working environment. In doing so, please be advised to keep the POS terminal at least 25mm away from other devices to ensure the machine is properly cooled down and functioning normally.

Specifications

RT-2015-G2/2016-G2

※ The product information and specifications are subject to change without prior notice. To get the detailed information on the RT-2015-G2/2016-G2, please check this model from Posiflex Global Website.

Read More About This Manual & Download PDF:

References

• homepage | Posiflex
• homepage | Posiflex
• Posiflex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>