CONAMBO JBT900 Wireless Headset for Better Communication User Manual

JBT900 Wireless Headset
For Better Communication

Welcome to your new Conambo Headset

We appreciate your choice of Conambo headset. Before use, please read this manual carefully and keep for future reference. To learn more and get support, welcome to visit our official website: www.conambo.com, email us via sales@conambo.com, or call us 86-755-88608031.

Important Safety Information

• Do not use the headset at a high volume for any extended period to prevent hearing damage.
• The JBT900 powered by built-in rechargeable battery, please charge the battery for 2 hours before first use.
• Removal of the battery in the headset shall NOT be conducted on your own.
• Do not expose the headset to moisture, extreme of prolonged heat, cold, humidity, or other adverse conditions.
• Clean the unit with a soft cloth or damp chamois leather. Never use solvents.
• Keep the headset, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
• Do not drop, crush, bend or apply excessive force to the device.

Operations

• Power on
  When the headset is off, press and hold the Multi-Function Button about 3s until you hear ‘beep’, and you will see the blue light stays on.

• Power off
  When the headset is on, press and hold the Multi-Function Button about 5s until you hear ‘beep’, and you will see the red light flash, then go off.

• Charging the headset
  The built-in battery is rechargeable and please use the included micro USB cable to charge the headset by connecting to a USB port of your computer, power bank or into an USB AC adapter( requires 5 VDC).
  Turn off the headset before charging, while charging, the red indicator stays on. Once fully charged, the red indicator will go off.

Pairing & Connection

• Pair to mobile device

1. When the headset is off, press and hold the Multi-Function Button about 5s until the blue & red light blinks alternately. The headset enters pairing mode.
2. Turn on Bluetooth function of your device(phone) and select ‘search’ or ‘discovery’ devices, then select ‘JBT900’ from the list, the headset will be connected to your phone.
3. If requested, type the password or pin ‘0000″. If paring is not successful within 2 minutes, please repeat above steps to pair again.

• Pair to the second device

1. Pair with your first device.
2. Turn off the headset then hold the Multi-Function Button for 5s until the headset enter pairing mode, the headset indicator flashes red and blue alternately.
3. Put your second device in Bluetooth Search/Scan Mode, select “JBT900”, the blue indicator will flash once every 2 seconds after connected.
4. Research and select “JBT900” on the first device.

• Connect to PC

1. Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
2. The USB adapter blue LED flashes to the turn solid to indicate the headset is connected to the USB adapter.
3. Configure for media (Set JBT900 as input & output device):

NOTE: You Bluetooth USB adapter comes pre-paired to your headset, and it only supports pairing with that headset.

• Answering/ Reject a Call

1. Press the Multi-Function Button once to answer a call, press it again to end the call.
2. press and hold the Multi-Function Button 2-3s to reject a call.

• Last Number Redial

1. Make sure the headset is connected to your phone.
2. Double-tap the Multi-Function Button to redial the last number.

• Phone Voice Control (e.g. Siri/Google Assistant)
  Press the Mute Button for 2s while the headset is in standby status to activate voice command functions on your phone. Support for this is phone dependent

• Volume Adjustment
  long press Volume +/Volume –

• Previous/Next Song
  short press Volume +/Volume –

• Mute
  Press the Mute button when calling, the red indicator will stay on.
  Press again to cancel, the red indicator will go off.

• Reconnect

1. Your headset will direct connect with previous Bluetooth device.

Troubleshooting

I. The mobile phone cann’t find the headset headset Possible Reasons:

1. The headset is not under ON and standby state;
2. The headset program is error;

Solutions:

1. Turn on the headset, hold the Multi-Function Button for Ss(red and blue indicator flashes alternately) to enable pairing status;
2. Recover the wireless headset’s default settings if the headset program is error;
3. After restart the mobile phone, remove all paired data in the wireless of the mobile phone.

Cautions:

1. After the wireless headset has entered in the pairing mode, it will connect within Smins, otherwise the headset will automatically turn off.

ll. No sound from the headset Possible Reasons:

1. The volume of the mobile phone is unsuitable;
2. The wireless headset and mobile phone aren’t connected correctly;
3. The Wireless headset is out of the working range Solutions:
4. Ad just the volume in the mobile phone;
5. Operate with the reference of the use steps;
6. Keep the headset in the range of 10m to the mobile phone without any obstacle.

Cautions:

1. Do not have any other operation when searching headset for avoiding program error;
2. Please use headset near the mobile phone to assure stable signal.
3. Music can only be played from one phone when two phones connected. If you wanna play music from one phone please pause or close the music of anther phone.

III. Charging red indicator doesn’t light on
Possible Reasons:
The headset has not been used for a long period.

Solutions:
Charge headset for 30mins, then the red indicator may light on.

Cautions:

1. Please charge the wireless headset at least once every two months when without use.
2. It will drop the capacity and service life of the battery if it is over charged or the Wireless headset is stored in the environment such as closed car.

Made by
SHENZHEN KENANBO TECHNOLOGY CO., LTD
Add: RM.208, Building 2, Jinfanghua E-business Industrial Zone, No, 450 Bulong Road, Bantian Street, Longgang District, Shenzhen.
TEL: 86-755-88608031
E-mail: sales@conambo.com
www.conambo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>