CAMZEB B0C7MJNLJY 4G LTE Cellular Security Camera User Manual

CAMZEB B0C7MJNLJY 4G LTE Cellular Security Camera

Product Introduction

Thanks for your purchase. To better understand the product performance and normal use and maintenance of this product, please read this manual carefully before use.
2. Applicable scene： Homes, parks, construction sites, warehouses, orchards, ranches, tourist attractions, plantations, rural areas, factories, farms, farm security or surveillance,off-grid or off-grid forests.

Features

• 400W high-definition color CMOS chip
• Support 4-128GB standard TF card, CLASS 4 or higher speed
• Support PIR alarm push and APP wake-up
• Support solar charging and external power charging
• Built-in high-capacity 13500mAh lithium battery, with solar panels can becontinuously powered all year round
• Support TF card loop coverage recording function
• Support cloud storage
• 4 super bright matrix white lights and 4 matrix infrared LED lighting
• Support 1080P HD video
• Support PTZ operation
• Two-way voice intercom function

Function key description and installation diagram

Remarks:
Both external DC port and USB port can be connected to 5-5.5V/1.5A power input for charging and external 5.5V/6W solar power

Red/blue bi-color light

Working status of red and blue lights:

1. When starting up, the red light is on first (the red light is always on and the signal is weak), then the blue light flashes to search for the 4G network, and the network is normal and the blue light is always on.
2. Flashing red light, device failure
3. The blue light keeps flashing fast, and the connection to the server is abnormal. If you press the reset button to reset when inserting the card, sometimes the blue light may keep flashing, and the 4G cannot access the network. You can turn off the power, take out the 4G SIM card, and then insert it and turn it on.
4. Red and blue flash alternately quickly, the device does not detect the SIM card, or the configured UID can be inserted into any SIM card, whether the customer SIM card is PIN is turned on, you need to reinsert the phone to disable PIN
5. The red and blue indicator lights flash alternately slowly, the traffic is insufficient or the payment is in arrears. Please replace the SIM or recharge first.

Product installation diagram, the camera is preferably about 10 feet away from the ground

Instructions

Thank you for choosing our product. First, please scan the QR code below to install the APP. After installation, please follow the steps below to set up your device. The application software will be updated from time to time, and the interface may be different from the manual.

Download mobile APP

1. Scan the QR code below and click to install or open the mobile App store/mobile application treasure to search for UBox to download and install.

2. Register and login account

   • Open the APP and click to register an account. After entering the mobile phone number or email address, click to agree to the user agreement, and click the register button (for a better user experience, please allow all notification permissions to avoid not getting notifications)
   • After entering the email to verify successfully, set the password and enter the verification code, and then click Register. After registration, the email will receive an email, click the email link to complete.
   • Enter the mobile phone number or email address used for registration, then enter the password and click to log in.
   • Click to log in to enter the device adding interface

3. Add device

   • Click “Add a home or device installation location” and enter the home name to add an address as prompted.
   • Click Next after entering your family name.
   • Enter the required content such as country or region, province, etc., and click Finish. (To choose your own country and region, you must choose a foreign address for domestic testing)
   • Click Add smart device.
   • Insert the SIM card, power on the device, click Add Device after the blue light is always on, and then click Install 4G Device
   • After the blue light is on, click Next to scan the code to add the device. If the blue light is not on, click on the blue light not on, check the corresponding problem, and follow the APP prompts to solve it.
   • The mobile phone camera is aimed at the device QR code of the product to scan and add, or the device can be added through the device QR code saved to the mobile phone album
   • Give the device a name, select the home location where the device is installed, and click Next. The default device name of the APP is smart camera, and the user can also modify it After the setting is completed, the device automatically enters the device list interface, congratulations, the device has been Installation is complete.

4. Other setting instructions
   Click the monitor screen, then click the setting interface to enter the setting menu

5. device name
   Click to enter to modify the name of the device, and click Apply after the modification is complete.

6. Storage management
   Cloud video: After opening, the cloud storage function can be enabled (the cloud storage function needs to be activated before it can be used, and each UID device can be activated for one month for free, and subsequent charges will be required)
   Total space and free space: This is to display the total capacity and remaining capacity of the TF card, no card is displayed as 0
   Format: format TF card

7. Image flip
   Normal: for the normal display direction
   Flip Vertical: Vertically mirror the display
   Flip Horizontal: Mirror display horizontally
   Simultaneous Flip: Mirror display vertically and horizontally at the same time

8. Ambient mode
   Normal mode: normal working mode, the default work in this mode, the night vision cannot be controlled during the day, and the night vision is controlled at night
   Night vision mode: Always work in night vision state (when the monitoring screen is color night vision, the white light is always on, and the image is a color image. In infrared night vision, the infrared light is always on, and the image is a black and white image)

9. PIR settings
   The human detection sensitivity can be set in the device settings. For use in environments where there are many people or cars often pass by, it is recommended to turn off or set the device to low sensitivity to avoid unnecessary wake-up and prolong battery life.
   Off: In this state, the device will not perform human body detection.
   Low sensitivity: In the sleep state of the device, the human body is sensed for 7 seconds to trigger an alarm.
   Medium Sensitivity: In the sleep state of the device, the human body is sensed for 5 seconds to trigger an alarm.
   High sensitivity: in the sleep state of the device, the human body is sensed for 1 second to trigger an alarm.

10. set arming
    The default is all-weather PIR triggering, which can be set to be valid for PIR triggering at a certain time period of a certain day. You can set up to 4 groups of time per day. The set time can only be added, but cannot be deleted. If you want to reset the settings, you need to click Restore default settings and add them again.

    • Click Add to pop up the arming settings.
    • Enable date on the left, unchecked PIR will not trigger, set the time period of the enabled date on the right, click the time to set the start and end time, click the + sign to add a group of times, up to 4 groups can be added, and click OK after setting.

11. Recording time
    There are 5 seconds, 10 seconds, 20 seconds, 30 seconds, full-time video.

12. 5 seconds: After exiting the APP, the device will enter the sleep state after 5 seconds

13. 10 seconds: After exiting the APP, the device will enter the sleep state after 10 seconds.

14. 20 seconds: After exiting the APP, the device will enter the sleep state after 20 seconds. 30 seconds: After exiting the APP, the device will enter the sleep state after 30 seconds.
    Full-time video recording: The device is always working, and the battery will drain very quickly. When the TF card is inserted, the video will be recorded all the time. The video will be saved for about 5 minutes/segment, and then continue to record. If you choose this state, you need to charge the external power supply all the time.

15. Power frequency
    50HZ: prevent the flicker of the mains frequency 50HZ
    60HZ: prevent the flicker of the mains frequency 60HZ

16. LED indicator
    On: Turn on the red and blue lights
    Off: Turn off the red and blue lights

17. synchronised time
    After clicking, it will synchronize with the mobile phone time.

18. Network retry time
    It is the automatic network search time when there is no or poor network signal

19. Device Information
    Display device UID, product model, firmware version, 4G module version, manufacturer and other information.

20. Firmware upgrade
    Click Firmware Upgrade, if there is no new firmware, it will prompt that the current version is the latest version. If there is new firmware, there will be a prompt corresponding to the version number. Click OK to start the upgrade. Do not cut off the power of the camera during the upgrade process. 50% or more), it will automatically restart after the upgrade is complete, and the upgrade will take about 2-3 minutes. After the upgrade is complete, the firmware version and 4G module version under the device information
    will have the corresponding version numbers displayed.

APP Basic introduction to the interface

• Click on the date, select the date to see all cloud videos of the current date
• Select the date you want to view to view all the videos of that day

Parameter

battery working time

| 1：24-28 hours of continuous discharge (without night vision), 14 hours of night vision

2：Sleep mode, check 10 times a day, 20

seconds each time, standby for 4-5 months

Recharging current| 1000MA@MAX
Number of white lights| 4 PCS 19.7-26.3 ft
White light power| 2W@160lm
Infrared light| 4 PCS 19.7-26.3 ft
PIR sensing distance| 16.5 ft-23 ft

TF card

| 4-128GB CLASS4 or above genuine TF card, 128GB card continuous video recording

about 640 hours (about 26 days)

Video resolution| 1080P

4G Network

| U.S.

Edition

| operator| AT&T, Verizon, T-Mobile, Sprint
channel| LTE-FDD/GSM/GPRS/EDGE
Europe：LTE-FDD：B1/B3/B5/B7/B8/B20
Australia：LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66
China：LTE-FDD：B1/B3/B5/B8 LTE-TDD：

B34/B38/B39/B40/B41

Operating temperature| -10-50℃
Storage temperature| 0℃–45℃

Equipment use precautions

1. This device is a low-power smart product, which can support APP remote wake -up, PIR human body detection wake-up, and automatically enter the sleep state after each wake-up work until the next wake-up.

2. This device is powered by a lithium battery. It can be used for 5 months when fully charged. When the battery voltage is low, the mobile APP will prompt you. Please charge the device in time after receiving the prompt (use an external power s upply in the absence of sunlight. powered by).

3. The battery has been dead for a few days
   This situation may be that the PIR has been triggering the alarm to start the camera, or the user frequently checks the video through the APP, and records more than 100 video segments every day, each of which is about 30 seconds. The location of the solar panel cannot guarantee that there will be at least 3 hours of sunlight per day. Time, it is recommended to set the PIR sensitivity to medium or low, change the installation position of the solar panel, and finally a place that can be illuminated by the sun all day.

4. When the TF card is inserted, the camera will automatically record, and automatically hibernate to stop recording and save it. To view the last video,
   you must wait for the hibernation to enter again before you can view it.

5. Because mainland China cannot receive Google’s system push messages, you need to turn on the auto-start function of the APP in your mobile phone to receive push messages.

FAQ

Q1: Which operators does this mobile phone surveillance camera support? Does this 4G LTE camera also work with wifi?
A1: The SIM card in the package supports T-Mobile, AT&T. Only works with 3g/4g LTE connections. Does not work with wifi connections, if you have multiple cameras, each camera will need its own data plan.

Q2: How much data will this 4G surveillance camera use per month?
A2: Data usage depends on actual working conditions. Typically, 1-2GB of data is enough for a month. Please recharge your SIM card in time.

Q3: What is the monthly cost of the sim card for this 4G cellular surveillance camera?
A3: Because it is a 4G camera, a data plan is required. We provide 50M data for trial use only.
Data bundles: ~$29 for 6 GB (90 days), $60 for 12 GB (180 days), $100 for 24 GB (360 days) with EiotClub SIM pre-inserted. Other SIM cards depend on your SIM service operator.

Q4: Can I use my own SIM card with this 4G security camera?
A4: Of course, the premise is that your SIM card signal supports the same frequency band as the camera.

Q5: Will this camera track moving objects? Or stay in a fixed position?
The A5 :4G cellular security camera cannot automatically track moving objects, but it can view the scene at a wide angle by rotating 355° horizontally and 95° vertically through the App Ubox.

Q6: How to insert and remove SIM card and SD card?
A6: Follow the SIM card and SD card icon on the camera to insert. If you want to remove it, just push it in again.

24 X 7 after-sales customer service

Hello dear friend:
This is an after-sales customer service from Amazon’s Camzeb brand store. Thank you very much for purchasing a Camzeb branded product. I collect suggestion from every customer on all products under the Camzeb brand.
We have always been committed to safeguarding the rights and interests of our customers. Have you experienced any operational issues or product defects after receiving the product? Please let me know directly, we will do our best to solve your problem! We appreciate your response very much. We will always strive to improve the quality of our products and always strive to make our customers have a pleasant shopping experience!

Thank you very much! Best wishes!

After-sales customer service email: 21090413@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>