Camzeb 2MP Outdoor Wireless Solar Security Camera User Manual

Camzeb 2MP Outdoor Wireless Solar Security Camera

PRODUCT INFORMATION

Thanks for your purchasing. In order to better understand the product performance and normal use and maintenance of this product, please read this manual carefully before use.

Application range

courtyard street lights and home anti-theft, etc.

Features

• 200W HD color CMOS chip
• Support 64GB TF card
• Support PIR alarm push and remote wake-up
• Support solar charging and external power charging
• Built-in high-capacity lithium battery, with solar panels, can be continuously poweredthroughout the year
• Support TF card loop coverage recording function
• Support cloud storage
• 16 super bright white lights and 8 infrared LED lighting
• Support 1080P HD video
• Support external solar charging (optional)

Function Button

Description of working indicator light, white light and night vision light:

• Green : Charging indicator, it lights up when charging, and goes out when it is fully charged or not. The green light is not controlled by the power switch.
• Red : working indicator, the light is on when working, and it goes out in standby or shutdown
• Blue : Networking indicator, on for about 1 second when networked, and then extinguished, and flashes after resetting successfully.
• Yellow : On when PIR is inducted, and off without induction
• White light and night vision light : at night or when the light is dark, the device is on when the device is working, and it is off in standby. It is not bright during the day.
• Power switch : ON to open, OFF to close
• Reset switch : press and hold for 5-8 seconds to reset after turning on the red light.

USER INSTRUCTION

Thank you for choosing our product. First, please scan the QR code below to install the APP. After installation, please follow the steps below to set up your device. The application software will be updated from time to time. The interface may be different from the manual.

Download APP UBox from your APP Store/ Google play for IOS/ Android devices.

Register and log in to an account

1. Open the app, click the registration account, enter the mobile phone number or email address, click agree to user agreement, and click the register button (for better user experience, please allow all notification permissions to avoid being unable to obtain the notice).
2. After the verification of the email address is successful, set the password and input the verification code, and then click Register. After registration, the mailbox will receive an email, and click the email link to complete
3. Enter the mobile phone number or email address used for registration, then enter the password and click login. Click login to enter the device adding interface. First you need to add a family name (you can pass the detail address) then you can add a device.
4. Click “add a device”

Add device

1. Click “Setup WIFI Device”.
2. Please click “YES” to next step. (ensure the blue light is blinking, if not please reset the camera by pressing and holding the RESET BUTTON until all the lights is off.)
3. You can reset the device name, then click “Next”.
4. Input your WIFI password (same with router WIFI),click sound wave configuration.(Please ensure you allowed location permission)
5. Make sure your phone close to the device, and ensure your phone is in ringer mode. (If it is failed, please confirm WIFI password is correct)
6. If it is connected successfully, you will see this interface. Click “OK” to enter “Device List”.

Home Page Instructions

Video Interface Icons Instructions

PIR settings

The human body detection sensitivity can be set in the device settings. To use in a crowded environment, it is recommended to turn off or set the device to low sensitivity to avoid unnecessary wake-ups and prolong battery life.

• Off : In this state, the device will not perform human body detection.
• Low sensitivity : When the device is in sleep mode, the human body is sensed for 7 seconds to trigger an alarm
• Medium sensitivity : When the device is in sleep mode, the human body is sensed for 5 seconds to trigger an alarm
• High sensitivity : When the device is in sleep mode, the human body is sensed for 1 second to trigger an alarm.

Sleep time

• 15 seconds  30 seconds, 60 seconds, no sleep:
• 15 seconds : After exiting the APP, the device will enter the dormant state after 15 seconds.
• 30 seconds : After exiting the APP, the device will enter the sleep state after 30 seconds.
• 60 seconds : After exiting the APP, the device will enter the sleep state after 60 seconds.
• No sleep : The device is always working, and the power consumption will be very fast. It is recommended that the sleep time be selected at 15 seconds.

Parameters

External solar

parameters

| 5.5V/6W, 5.5MM DC head (positive inside and negative

outside)

External USB power

supply

| 5V/1.5A (not equipped with standard configuration)
battery capacity| 3.7V/1000MAH
Battery discharge time| 1: Continuous discharge for 20-24 hours (no night vision), night vision for 10 hours

2: Sleep mode, check 10 times a day, 20 seconds each time,

standby for 5 months

recharging current| Built-in solar 220MA@MAX, external USB and solar:

800MA@MAX

Number of white lights| 16 pcs, irradiation distance 3-5 meters
White light power| 1W@80lm
Infrared light| 8 pcs@5-7m
PIR sensing distance| 5-7 meters
TF card| Maximum 64GB TF card above CLASS4, 64GB card continuous

recording about 320 hours (about 13 days)

Video resolution| 1080P
WIFI working

frequency

| 2.4G, 802.11b/g/n
---|---
Operating temperature| -10℃–+50℃
Storage temperature| 0℃–+45℃

Precautions for the use of equipment

1. This device is a low-power smart product that can support APP remote wake-up, PIR human body detection wake-up, and automatically enter the sleep state after each wake-up work, until the next wake-up.
2. This device is powered by a lithium battery. It is expected to be used for 5 months when it is fully charged. The mobile phone APP will prompt when the battery voltage is low. Please charge the device in time after receiving the prompt (use it in the absence of sunlight) External power supply).
3. During the installation process, please ensure that the network is normal under the installation environment, especially when installing outdoors/outside the door, you need to check whether the Wi-Fi is covered, if the Wi-Fi signal is weak, you need to add a Wi-Fi signal relay amplifier
4. The battery is out of power for a few days. In this case, the WIFI signal is generally unstable. Sometimes the WIFI has a network, and sometimes there is no network, causing the device to frequently search for the network to start the device, causing the battery to discharge too quickly. Please ensure that the network is unblocked. Or PIR keeps triggering an alarm to start the camera.
5. When the TF card is inserted, the camera will automatically record when it is working. It will automatically stop recording and save it in sleep mode. If you want to view the last video, you must wait for it to enter again after sleep.
6. Because mainland China cannot receive Google’s system push messages, you need to open the APP’s self-start function in your mobile phone to receive push messages
7. The battery is low or out of power in about 1-2 days
8. Make sure that the APP does not choose not to sleep during sleep, and the APP always works. If the wireless router in the device is too far away or the network is unstable, the device will automatically start the device to search for the network after 10 minutes of checking that it is disconnected. Please make sure that the distance between the router and the device and whether the network is disconnected.

Remarks ： Please fully charge the product with USB cable before installation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>