NIUESS NE-700 Portable Power Station User Manual

NIUESS NE-700 Portable Power Station

Glossary

The following terms are used in this document to indicate various levels of potential harmd that may be caused by improper operation.

NOTICE
The instructions,if not properly followed, may result in property damage and minor injury .

CAUTION
The instructions, if not properly followed, may result in property damage and serious physical damage injury.

WARNING
The instructions, if not properly followed, may result in property damage, major accident and serious injury.

Warning 1

1. Please keep dry and keep away from fire.
2. Do not disassemble, puncture, perform irregular operations on the exposed ports or strongly impact the product.
3. Please recycle and dispose of the product according to local laws.
4. Pay attention to safety when carrying, do not hit your feet.
5. For children or people with limited intelligence, be careful to use it under the protection of a supervisor.

Warning 2
Read the ENTIRE user manual to be familiar with the features of this product before operating. Failure to operate the product correctly may result in damage to the product or personal property and cause serious injury. NIUESS will not assume any legal responsibility.

Do not use parts not provided or recommended by NIUESS, and must strictly follow the instructions of NIUESS to install and use the product, otherwise you will not be able to obtain free after-sales service from NIUESS.

This guidance document contains instructions for safety, operation, and maintenance. It is important to read the user manual carefully before assembly, setup and use.

Product Safety Guidelines

Warning
Improper use may result in fire, property damage or personal injury. Make sure to use the product according to the following safety rules and guidelines.

Product Use:

1. Do not let the product come into contact with any liquid, do not immerse the product in water or get it wet. Do not use the machine in the rain or wet environment, otherwise the battery will spontaneously ignite, and may even cause an explosion.
2. Never use NON-NIUESS parts. Go to http://www.niuess.com to purchase new parts. NIUESS takes no responsibilities for any damages caused by the use of non-Niuess parts .
3. Never install or remove other modules from the machine when it is turned on. Do Not plug or unplug other modules when the power of the product is turned on, otherwise the power interface may be damaged.
4. The product should be used at an ambient temperature between -20° C and soc. If the temperature is too high (above S0°C), the battery may catch fire or even explode. If the temperature is too low (below – 20°C), the performance of the product will be seriously reduced, and it may not meet the normal use requirements. It can be used normally after returning to normal temperature.
5. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident during use.
6. Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
7. DO NOT use the product if it was involved in a crash or a heavy bump.
8. If the product falls into the water during use, take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as described in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extinguishing equipment in the following order: water or water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
9. DO NOT put the machine in a microwave oven or in a pressurized container.
10. Do NOT short-circuit the product with wires or other metal objects.
11. Avoid collision. DO NOT place heavy objects on the machine.
12. If the machine interface is dirty, wipe it off with a dry cloth. Otherwise, it will cause abrasion and result in energy loss or inability to charge.

Product Charging:

1. Always use NIUESS approved charging cables. NIUESS does not take any responsibility for any damages caused by using non-NIUESS charging cables.
2. When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
3. After continuous full-load discharge, if the product battery is in a high temperature state, it is recommended to wait for the device to cool to room temperature before charging, otherwise charging may be prohibited. The rechargeable ambient temperature of the battery is O •c

• 45 •c, and the ideal charging ambient temperature (22 •c – 28 °C) can greatly extend the service life of the battery.

Product Storage and Transportation:

1. Keep the product out of the reach of children. If any children accidentally swallow parts, please see a doctor immediately.
2. If a low-battery warning appears after use, charge the product before storing it. Otherwise, long-term storage may cause damage to the batteries in the product. Batteries in the product will enter hibernation mode if they are depleted and stored for a long time. Recharging the product can bring the battery out of hibernation.
3. Do not place the machine near heat sources ,such as a car in direct sunlight, a fire source, or a heating stove.
4. Store the product in dry environments. Please keep the machine away from water or where it may leak.
5. Do not store or transport the machine together with glasses, watches, metal necklaces, hairpins or other metal objects.
6. Never ship a product with a battery power level higher than 30%.

Product Battery Disposal:
Be sure to completely discharge the battery of the machine before placing the battery of the machine in the designated battery recycling bin. Batteries are hazardous chemicals and should not be disposed of in ordinary trash cans. For details, please follow local laws and regulations on battery recycling and disposal.

Product Maintenance:

1. Do not store the battery of the machine for a long time in an environment where the room temperature exceeds 45°C or is lower than -20°c.
2. If the machine is idle for a long time, its performance will be affected.
3. Recharge and discharge every 3 months or so to keep the battery alive.

Travel Notice:
Lithium batteries and equipment with a capacity greater than 160Wh are prohibited.This product cannot be carried on board the aircraft.

Usage/Maintenance/Safety Manual

CONGRATULATIONS!
Welcome to use the portable portable power station NE-700/NE-700Pro. Please take a moment to read the manual and use the NE-700/NE-700Pro as instructed in the manual. You can fully grasp how to use the NE-700/NE-700Pro in just one reading!

Notice!
To turn the NE-700/NE-700Pro on or off, you need to press and hold the ON/OFF power key.
To turn on the AC power outlet, you need to PRESS and HOLD the AC Button after turning on NE-700/NE-700Pro. We set the AC power button for users to turn off AC power when they don’t need it and save power.
Please follow this introduction step-by-step to be familiar with each of NE-700/NE-700Pro’s ports, buttons, display screens and more. Please fully charge (100%) the NE-700/NE-700Pro before use it.

Machine Description of NE-700/NE-700Pro

1. LCD Display For details of the display, see the description of LCD display.

2. DC Output Switch & DC Output Indicator
   Click to turn the DC output on or off

3. DC Output Port

4. Cigar lighter port, 2 DC5521 ports, shared by two channels, the maximum output current is 1 OA

5. WiFi Reset Switch
   PRESS & HOLD 3s to reset Wi-Fi

6. USB-C 1 00W Output Port

7. Fast Charge USB-A Output Port

8. Power Button/LCD Display Screen Switch/Power Indicator
   Short press to power on, short press to switch the LCD screen when power on, long press to power off

9. LED Lights & Switches
   Short press to cycle through weak light – strong light – SOS flash – off. During this process, press and hold for 3 seconds to directly close.

10. Ventilation Vents

11. AC Output Socket

12. AC Power Button (PRESS for ON/OFF AC) Output Indicator

13. AC Charge Input Socket

14. Solar Charge/Cigar lighter Input Port

15. Overload Protection Switch

16. Power Earth Screw

Physical Function Description

1. LCD Display
   Displays prompt information such as the NE-700/NE-700Pro’s power, running status, and fault alarms.

2. DC Output Switch & DC Output Indicator
   Click to open or close the DC output. This button controls the DC output
   of the NE-700/NE-700Pro Cigar lighter output port and the DC5521 output port.

3. DC Output Port
   The Cigar lighter output port and the DC5521 output port are internally connected in parallel, with the same voltage, and support a maximum current output of 1 0A. It can supply power for on-board electrical appliances, and can also be used for car 12V battery charging (must be used under the guidance of professionals)

4. WIFI Reset Switch
   Press and hold this button for 3 seconds, the device will turn on WIFI, and you can connect with the mobile phone to realize APP remote control. (This feature is under development, so stay tuned … )

5. USB-C 1 00W Output Port
   USB-C can charge devices including MacBook Pros, Android phones, and any other device with a USB-C port, and the USB-C output indicator icon will automatically light up when the USB-C port is in use.

6. Fast Charge USB-A Output Port
   When the external device uses the USB-A port for charging, the USB-A output indicator icon on the display will automatically light up; the device that supports fast charging can be charged at a maximum speed of 24W. If your device does not support fast charging, the device will be normal speed charging.

7. Power Button/LCD Display Screen Switch/Power Indicator
   Click this button to turn on the NE-700/NE-700Pro, the power indicator is in a breathing state, and the display is on. A short press turns the display on or off and keeps the device running. When the NE-700/NE-700Pro detects that there is an input or output access device or other key operations, the display will automatically light up. Otherwise, the screen will automatically turn off after 3 minutes of inactivity (the screen-free time can be set by the APP), but the device is still running. After the idle time exceeds two hours, the NE-700/NE-700Pro will automatically shut down (the shutdown time can be set by the APP).

8. GD LED Lights & Switches
   Press the LED transparent lampshade to switch the lighting effect, the light is divided into three gears, low light, strong light, and SOS rescue signal flash. Short press to cycle through low light/high light/SOS flash/turn off LED light. During this time, a long press can directly turn off the LED.

9. Ventilation Vents
   The NE-700/NE-700Pro dissipates heat here, do not pierce foreign objects into the cooling air duct.

10. AC Output Socket
    Charge devices that require a voltage of 120Vac/60Hz, such as laptops, TVs, mini refrigerators, vacuum cleaners, etc. With X-Turbo function, it supports power reduction of additional 700W-1800W electrical appliances (does not support all excess electrical appliances, you need to test to confirm that they can be used, so as not to affect your work and life).

11. AC Power Button (PRESS for ON/OFF AC) Output lndicator
    Click this button to turn on/off the AC output of the NE-700/NE-700Pro. The AC light is on when it is on, and it is off when it is off. Please turn off the AC output when the device is not in use, and be sure to unplug the power cord from the AC output port. When the output load is not detected for more than 10 hours, the NE-700/NE-700Pro will automatically turn off the AC output for you.

12. AC Charg Input Socket
    Connect to the AC line of the universal pin-shaped port (the cable that can withstand an effective current of 15A), and connect the other end to the AC power supply, which supports 120Vac/60Hz AC charging.
    The NE-700/N E-700Pro’s X-Turbo system has entry-level UPS functionality, which means you can always use the NE-700/NE-700Pro’s
    AC outlet to work (the AC power is coming from the grid, not the battery) while the AC power is connected to the wall. It can automatically switch to the NE-700/NE-700Pro battery power supply mode within 20ms after the power is turned on, and continue to escort your work.
    ( Note: The UPS function of the X-Turbo system is entry-level, not a professional-level UPS function, and does not support Oms switching. Please do not connect it to equipment that requires high uninterrupted power supply requirements, or please check for compatibility after multiple tests. use, such as data servers and workstations).

13. Overload Protection Switch
    During charging, when the input current is continuously greater than 1 OA, the AC charging port will be protected (shown as the button pops up). After confirming that the machine is not faulty, press the protection switch to reset to resume charging.

14. Solar Charge/Cigar lighter Input Port
    Supports up to two 11 OW solar panels in parallel, with a maximum input voltage of 25V. It can also support 12V/24V maximum 10A vehicle power input. The device itself will limit input up to 200W. (Be sure to start the car when using it, so as not to cause the car battery to lose power and unable to start).

15. Power Earth Screw
    NE-700/NE-700Pro can meet the needs of some electrical appliances through external grounding.

Introduction to Screen Interactive Display

• a. Extra Battery
• b. AC Input Indicator
• c. Solar Panel Input Indicator
• d. Cigar lighter Output Indicator
• e. USB-C Output Indicator
• f. USB-A Output Indicator
• g. AC Output Indicator
• h. UPS Indicator

Remaining Charge/Discharge Time
Determine the remaining charge/discharge time based on the current power consumption of the device, accurate to minutes.

Error Indicator
This icon lights up when a fault occurs.

Fan Indicator
The working status and speed of the fan is controlled by the device, the icon flashes when it fails.

High Temperature Indicator
When the temperature of the equipment is too high, a high temperature warning icon will appear on the screen to warn the machine that the temperature is too high, please pay attention to cooling the machine.

Low Temperature Indicator
When the temperature of the device is too low, a low temperature warning icon will appear on the screen to warn the machine that the temperature is too low. Please warm up the machine properly before using it.

Battery Level Indicator
Displays the remaining power, and the power icon will cycle from left to right when charging.

Bluetooth indicator
Lights up when the bluetooth is connected normally, flashes when abnormal.

WiFi indicator
Lights up when WiFi is connected normally, and flashes when abnormal.

Input Power Indicator
Display the current input power of the device.

Output Power Indicator
Display the current output power of the device.

Overload Warning
Overload icons and corresponding parts indicate corresponding overload modules.

Port Status Indicator
Displays the usage status of each port. Lights up when the port is working normally and flashes when it is abnormal.

Description of Alarm Prompt Information

The equipment display screen uses different icons and combined icons to indicate the reason for device protection.

| OVERLOAD| USB-A
Overload Protection|

The USB-A and OVERLOAD icons flash together, and it can automatically resume operation after 10 seconds after unplugging the appliance.

---|---|---|---
| **| USB-C| USB-C and High-Temperature icons flash
| High| together. After the interface cools down,
| Temperature| the interface wi ll automatically resume
| Protection| operation.
| OVERLOAD| USB-C
Overload Protection| The USB-C icon and the OVERLOAD icon flash together. After unplugging the appliance , it will automatically resume operation after 10 seconds.
|
Charging| | The CHARGING icon , ERR icon , and high
| High| temperature icon flash together This will
| Temperature| happen especially when you charge your
| Recharge­| device immediately after a heavy battery
| protection| use. Don’t worry, please wait , it can be
| | reused after cooling down.
| | High| The ERR icon and the high temperature
| Temperature| icon flash together , plea se wait for the
| Discharge­| battery to cool down and then restore
| protection| power.
| CHARGING| Low| The CHARGING icon , ERR icon , and low
| Temperature| temperature icon flash together , and the
| Recharging­| battery can be recharged by warming up
| protection| the battery properly.
| | Low Temperature Discharge- protection| The ERR icon , the low temperature icon flash together , please put it in a warm place and wait for the battery to  heat up to restore power.
| | CHARGING icon , ERR icon and OVERLOAD
|
( CHARGING )
OVERLOAD| Overload Recharging- protection| icon flash together , unplug, restart the machine, then plug it back in, if the problem persists , please contact our
| | product experts at suppot@repower.com
| OVERLOAD**| Overload Discharging- protection| The ERR icon and the OVERLOAD icon flash together. Unplug the appliance and restart the machine to recover. The appliance must be used within the rated power.
| | Communication Failure between

Main Board and BMS

| The ERR icon is flashing , if there is no recovery after restarting the machine , please contact our product experts at support@repower.com.
| | Battery Failure|

The ERR icon is al ways on, which means the battery is faulty, please contact our product experts at support@repower.com

| | Communication Failure between Main Board and AC|

The AC icon flashes , restart the machine and if there is no recovery, please contact our product experts at suppot@repower.com.

|

OVERLOAD

| Inverter Output Overload|

The AC icon and the OVERLOAD icon flash together . After 10 seconds , restart the AC ON/OFF to restore . The electrical appliances must be used within the rated power (the power of electrical appliances in X-Turbo mode is limited , please refer to the introduction of X-Turbo functions).

| | Inverter High Temperature Protection| AC and High-temperature icons flash together. Let the inverter cool down. Then turn AC Power On/OFF .

It will automatically resume operation .

|

| Inverter Low Temperture Protection| The AC and Low-Temperature icons flash together. Move NE-700/NE-700Pro to a warmer place and wait for the inverter to warm up.Press AC Power ON/OFF button again. It will automatically recover. If there is no recovery , please contact our product experts at suppot@repower.com.
|

Fan Blockage

|

If the fan icon flashes , please check whether there is any foreign matter in the fan. If there is any foreign matter , please turn off the machine first and then remove the foreign matt er. After completion , turn on the machine again to resume use.

If there is no recovery, please contact our product experts at suppot@repower.com.

| Cigar lighter| The Car and OVERLOAD icons flash
| | Output| together , restart the machine to restore ,
| Car OVERLOAD| Overcurrent/| and the electrical appliances must be
| Overload| used within the rated power.
| Car| Cigar lighter High Temperature Protection| Car and High- Temperature icons flash together. Wait for NE-700/NE-700Pro to cool down and it will automatically recover.|

Technical Specifications

Net Weight| NE-700: 7.5Kg NE-700Pro: 7.7Kg
Size| 294185236(mm)
Capacity| NE-700:512Wh NE-700Pro:720Wh
Certification Standards| CE/FCC/GB/PSE/RoHS/UKCA /UL 2743-2020
APP| Support

AC  Output (pure sine wave)

| Rated power 700W , peak value 1800W, 120Vac(60Hz) Intelligent inverter system: support 700-1B00W equipment
USB-A Fast Charge (x2)| 24W,5V DC,3.4A,9V DC,2.5A, 12V DC,2A (max)
USB-C Fast Charge (x2)| 1 00W,5V /9V12V /15V DC,3A,20V DC,5A (max
Cigar lighter Output| 136W,13.6V DC,1 0A(max)
Dc5521 Output| 13.6V DC,1 0A(max)
AC Charge Input Voltage| 90~130Vac 60Hz
AC Charge Input Power| Maximum input power 500W
Solar Charge Input| 200W,10-25V DC,10A(max)
Cigar lighter Input| 12V/25V DC,1 0A(max),200W(max)
|
Cell Type| High-rate automotive-grade power cells
Discharge Temperature| -20°C-50°C±3°C
Charge Temperature| 0°C-45°C±3°C

Cycle Life

| NE- 700: 2000 cycles(80%+)

NE- 700Pro: 800 cycles(80%+)

Introduction of Special Functions

X-Turbo-AC Fast Charging Mode lntroductor
X-Turbo allows you to use electrical appliances with a rated power of 700W- 1800W without overload protection and power failure, and you do not need to worry too much about the power limitation of the energy storage power supply. With traditional inverters, as long as an electrical appliance exceeding the rated power is used, the equipment will be overloaded, thus making such electrical appliances unusable. Please note when using:

1. The X-Turbo function is enabled by default in the factory equipment. If you want to disable this function, you need to operate it in the APP developed later; X-Turbo cannot be used when the AC output is connected to the home grid, otherwise the low-voltage protection will trip during use.
2. The X-Turbo function cannot be used in the charging state and when the X-Turbo is not turned on, please pay special attention.
3. When using an electrical appliance with a rated power of 700W-1800W, please connect only one appliance, so as not to affect the use effect of other electrical appliances due to voltage changes when multiple appliances are used.

• The X-Turbo function is not suitable for all appliances, and some have power ratings that have strict requirements on voltage. 700W-1800W electrical appliances are still incompetent, so please do a full test before traveling, so as not to affect your work. Air conditioners and air compressors are not recommended to avoid damage to electrical appliances. It is recommended to use heating electrical equipment with a rated power of 700-1 B00W, such as hair dryers, electric kettles, coffee machines and other equipment.

X-Turbo-lntroduction to Entry-level UPS Functions

Entry-level UPS Usage Reminder
The X-Turbo system has entry-level UPS function, which means that you can use the AC outlet of the device to work while connecting to the AC power supply on the wall (the AC power is from the grid, not the battery at this time). When the grid suddenly loses power, it can automatically switch within <20ms Battery powered mode for device.
However, this function is a non-professional UPS function and does not support Oms switching. Please do not connect it to equipment that requires high requirements for uninterrupted power supply, or please test it several times to confirm whether it is compatible before using it. The company is not responsible for equipment that does not operate normally, or data loss, such as data servers and workstations, otherwise it will affect your experience of using the machine.

Entry-Level UPS User Guide
Users can connect the AC charging cable connected to the device to the power grid, then connect the electrical appliance to the AC output port of the device, and turn on the AC switch to automatically switch to entry-level UPS mode. When the power grid is cut off, the device can continue to use the battery energy to supply power to the electrical appliances, escorting your device (as shown in the figure below).

*UPS only supports the use of electrical appliances below 700W, and do not use other equipment at the same time to avoid OVERLOAD during use. Our company is not responsible for abnormal operation or data loss caused by careless use. Only one device can meet the UPS function according to the following diagram, and the UPS function is not available when multiple devices are connected.

FAQs

Solar Panel Connection Diagram

• How to recharge the device using solar panels?
  To connect a single solar panel, see the solar panel instructions. Here we focus on the connection method of 1 or 2 solar panels. The device can accept 10-25V DC input, when the input exceeds 25V, the device will trigger overvoltage protection. Excessive voltage may damage the product. Users should follow these instructions. If the specified number of connections is exceeded or the connections are not made in accordance with the specifications, the company will not be responsible for the free maintenance service of the damaged machine within the warranty period.

1.  **Connection/Parallel Charging Method (Recommended Scheme)**  

You can connect one solar panel (does not support multiple series in series) through the MC4 interface according to the method of Case 1, then connect our MC4 to XT60 cable, and use the XT60 connector to connect to the XT60 interface on the device to charge.
In addition, you can connect up to 2 sets of solar panels in parallel according to case 2 through the MC4 interface. When you want to connect 2 solar panels, you can connect the two sets of solar panels in parallel, and then connect our MC4 to XT60 connection Connect the cable to the XT60 port on the device with the XT60 connector to charge. Parallel connection is not standard and needs to be purchased separately by the user.
NE-700/NE-700Pro charging interface area NE-700/NE-700Pro charging

• The device supports the use of third party solar panels (DIV solution)
  Users can use the universal solar panel with MC4 interface standard purchased from their own channels to power the device. As long as the voltage and current (10-25V 10A Max) meet the requirements of the device, the device can be powered through the MC4 to XT60 adapter cable. Please pay attention to the following picture. The order in which the positive and negative poles are connected, the wrong connection will cause the risk of damage to the device. During the warranty period, the machine is damaged due to equipment failure caused by third­ party solar panel quality problems or improper operation. The company does not undertake free maintenance during the warranty period .

How to charge NE-700/NE-700Pro?
The AC charging port that comes with the NE-700/NE-700Pro fuselage-the 3 pins plug, and the DC charging port-the XT60 port, are located on the side of the fuselage. You can charge the device from AC power, vehicle 12V/24V DC power and solar panel with XT60 cable.
Note: When the XT60 and AC port are connected to the input at the same time, only the AC input is enabled.

How to maintain the NE-700/NE-700Pro?
NE-700/NE-700Pro is versatile, so it is likely that a simple cleaning will be required from time to time. Wipe with a dry, non-abrasive cloth. If you also want to wipe even more cleanly, we recommend using a cleaner designed for mobile phone and computer screens. Do not expose the product to large amounts of water!

How to store the NE-700/NE-700Pro?
Store NE-700/NE-700Pro in a dry place and avoid direct contact with water. In order to prolong the battery life, if you need to store it for a long time, please charge it to 30%-80%, turn off the main switch and store it at room temperature.

How to use the NE-700/NE-700Pro safely?
Please use the NE-700/NE-700Pro under temperature conditions within its operating temperature range. Use of the NE-700/NE-700Pro outside of its optimum temperature operating range may cause the NE-700/NE-700Pro to exceed its safe and effective operating limits. Do not immerse the NE-700/NE-700Pro in water. The NE-700/NE-700Pro is not waterproof and doing so will void your warranty. It is normal for over-temperature protection to appear when using a 700W heating appliance for more than half an hour. Please wait for about 1 hour before using or charging.

Is it possible to upgrade?
The NE-700/NE-700Pro can upgrade the firmware version through the subsequently developed APP to optimize the operation of the device, and the corresponding parameters of the machine will also be adjusted and optimized. Please refer to the release notes for firmware upgrade.

What’s in the parts Box?
NE-700/NE-700Pro Main Unit
AC Charging Cable(lnput)
Cigar lighter Cable(lnput)
DC 5521-5525 Cable
User Manual/Simple Operation Guide/Warranty Card/Qualification Certificate/Packing Box

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>