NOHOH NX-YSP04 Magnetic Power Bank User Manual
- June 12, 2024
- NOHOH
Table of Contents
NOHOH NX-YSP04 Magnetic Power Bank User Manual
Thank you for purchasing and using our product! To ensure a better user experience for your phone or electronic device, please read this manual along with the manual for your phone or electronic device.
Product Specification
Accessories List
NX-YSP04 Portable Power Bank x1 Instruction Manual x1 USB C Cablexl
Operating Instructions
- Power Input/Output: Use the Type-C/Lightning input port to charge the NX-YSP04. It has a Type-C interface for both input and wireless charging output.
- Battery Indicator: The NX-YSP04 is equipped with LED lights to display the battery level, allowing you to easily monitor the power level of the portable charger. Refer to the table below.
How to Use the Portable Charger to Charge Other Devices
** The NX-YSP04 is designed for charging communication and digital products. It is compatible with most smartphones and other digital devices. The following diagram illustrates a simple charging process using an iPhone 13 Pro as an example.
Connect the NX-YSP04 to a power adapter using a Type-C data cable, as shown in the diagram.
Charging Status
When charging other devices:
- LED indicator shows a gradual decrease in battery percentage, indicating that the device is charging.
- LED indicator turns off, indicating that the device is fully charged.
When charging the NX-YSP04
- LED indicator blinks with one light and gradually increases, indicating that the power source is charging.
- LED indicator shows all four lights at 100%, indicating that the NX-YSPO4 is fully charged.
Note :
- If you find that the device cannot be charged using the NX-YSPO4, please check if the connections are normal and secure, and if the charging interface accessories are suitable. It is recommended to use reputable power adapters such as “NOHON” or other well-known brands for charging
- Due to conversion efficiency, the capacity of the portable charger may not be equal to the actual charging capacity.
- The portable charger is compatible with most smartphones, but there may be certain models that are not supported for charging. In such cases, this product does not qualify for replacement or warranty.
Safety Information:
WARNING: Failure to follow these safety instructions may result in fire, electric shock, damage, or other injuries.
The NX-YSPO4 uses high-quality polymer battery cells, so please use it with confidence.
- Do not drop; dismantle, puncture, expose to high temperatures or water.
- If any swelling or other abnormalities are noticed in the portable charger or the device being charged, please stop using the NX-YSPO4.
- This device is not suitable for individuals with physical, sensory, or mental disabilities (including children) or those lacking relevant experience and knowledge, unless supervised or guided by individuals responsible for their personal safety. Keep the device out of reach of children and ensure that they do not treat it as a toy.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.