Husqvarna 966 79 65-01 Flail Mower Instructions
- June 12, 2024
- Husqvarna
Table of Contents
FLAIL MOWER
Instructions
966 79 65-01
**** SAFETY REGULATIONS
| Read and understand the Operating Instrction before use.
---|---
| Keep yor hands away from rotating parts.
| Keep your feet a safe distance from the machine.
| Never use the machine if downwards on slopes with an incline is greater than
10 degrees.
| Never use the machine with defective guards or when safety equipment is not
fitted.
| Do not stand in the machine´s workin area.
Make sure there are no stones, twigs and other rubbish on the lawn. This type
of object can be thrown by the machine and cause personal injury or damage to
the machine. Avoid driving over gravel paths, etc.
| Shut off engine before performing maintenance or repair work.
SAFETY REGULATIONS
- Read the owner’s instruction manual carefully.
- Be thoroughly familiar with the controls and proper use of the equipment. Know how to stop the unit and disengage the controls quickly.
- Never allow children to operate equipment. Never allow adults to operate equipment without proper instruction.
- Keep the area of operation clear of all persons, especially small children and pets.
- Exercise caution to avoid slipping or falling, especially when operating in reverse.
- Thoroughly inspect the area where the equipment is to be used and remove all door mats, sleds, boards, wires and other foreign objects.
- Never take passengers.
|
---|---
|
|
|
|
|
|
Accessories
IPL, Flail Mower T-60367, 966 79 65-01, 2011-09
Flail Mower
Spare parts
966 79 65-01
Pos | Part number | Part name | Qty |
---|---|---|---|
1 | 579 54 93-01 | Frame | 1 |
2 | 576 68 48-01 | Frame | 1 |
10 | 535 41 50-55 | Guard Plate | 1 |
11 | 576 48 87-01 | Weldment | 1 |
12 | 535 41 50-57 | Spring | 1 |
13 | 576 48 88-01 | Arm | 1 |
14 | 535 41 50-59 | Pulley | 1 |
15 | 535 46 66-76 | Shaft | 0 |
16 | 535 41 50-61 | Pulley | 1 |
17 | 535 41 50-48 | V-Belt | 1 |
19 | 576 68 49-01 | Belt Guard | 1 |
21 | 535 41 50-63 | Flail, Flail Mower | 112 |
22 | 531 02 12-19 | Nut, Lock | 22 |
23 | 531 02 11-99 | Screw | 56 |
24 | 535 46 66-10 | Gear Box, 1:1 | 1 |
25 | 535 41 50-25 | Universal Joint | 1 |
26 | 535 41 50-64 | Drive Shaft | 1 |
27 | 531 00 51-81 | Bearing | 1 |
28 | 531 02 11-70 | Pin, Spring | 1 |
29 | 535 41 50-29 | Set Screw | 1 |
30 | 535 41 50-28 | Key | 1 |
31 | 531 02 11-38 | Bearing | 4 |
32 | 535 41 50-45 | Screw | 23 |
33 | 531 02 12-16 | Washer | 2 |
34 | 531 02 11-69 | Set Screw | 2 |
35 | 535 41 50-65 | Collar | 1 |
36 | 576 48 96-01 | Bearing | 2 |
37 | 535 41 50-67 | Guard | 2 |
38 | 535 41 50-68 | Guard Plate | 2 |
39 | 535 41 50-69 | Screw, Special | 1 |
40 | 535 46 66-77 | Guard, Gear Box | 1 |
42 | 579 54 95-01 | Guard | 1 |
43 | 588 16 41-01 | Grip | 1 |
44 | 535 41 50-73 | Rod | 1 |
45 | 535 41 50-74 | Rod, Lift | 1 |
46 | 576 68 50-01 | Mounting Plate | 4 |
47 | 535 41 50-76 | Spring | 1 |
48 | 535 41 50-77 | Segment | 1 |
49 | 506 86 96-01 | Plastic part | 8 |
50 | 506 81 38-01 | Mounting Plate | 3 |
51 | 506 96 30-01 | Support Wheel | 2 |
52 | 597 89 46-02 | Weldment | 2 |
53 | 576 68 51-01 | Screw | 2 |
54 | 544 01 70-01 | Dust Cap | 2 |
55 | 506 81 08-02 | Collar | 2 |
56 | 506 87 41-02 | Collar | 4 |
57 | 531 02 11-30 | Nut, Lock | 7 |
58 | 531 02 11-32 | Nut | 1 |
60 | 535 41 50-84 | Screw | 1 |
61 | 531 02 11-84 | Washer | 22 |
62 | 576 49 16-01 | Pulley | 1 |
63 | 506 50 48-05 | Washer | 2 |
65 | 535 41 50-87 | Screw | 2 |
66 | 535 41 50-88 | Screw | 6 |
67 | 531 00 52-20 | Key | 1 |
68 | 535 41 50-89 | Screw | 4 |
69 | 531 02 11-37 | Washer | 4 |
70 | 535 41 50-36 | Screw | 2 |
72 | 535 41 50-11 | Washer | 2 |
73 | 531 02 11-98 | Nut, Lock | 4 |
74 | 576 49 20-01 | Collar | 1 |
75 | 531 02 12-59 | Screw | 2 |
76 | 535 41 50-91 | Screw | 2 |
77 | 531 02 11-44 | Screw | 7 |
79 | 531 02 11-46 | Screw | 2 |
80 | 531 00 52-66 | Screw, Lock | 1 |
81 | 593 51 40-01 | Screw | 1 |
86 | 531 02 11-96 | Screw | 2 |
88 | 577 46 90-01 | Decal, Husqvarna | 1 |
89 | Decal, Lawn Rake | 1 | |
90 | 576 68 52-01 | Rubber | 1 |
91 | 576 68 53-01 | Frame | 1 |
96 | 535 46 66-78 | Pulley | 1 |
97 | 535 46 66-26 | Washer | 1 |
98 | 725 64 53-01 | Screw | 1 |
99 | 535 46 66-27 | Key | 1 |
100 | 535 46 66-67 | Key | 1 |
101 | 579 54 98-01 | Weldment, right | 1 |
102 | 579 55 00-01 | Weldment, left | 1 |
103 | 579 55 01-01 | Weldment, rear | 1 |
104 | 579 55 04-01 | Mounting Plate | 2 |
105 | 579 55 05-01 | Screw | 2 |
106 | 531 00 53-16 | Nut, Lock | 2 |
108 | 576 49 17-01 | Washer | 2 |
109 | 531 02 12-39 | Screw | 2 |
110 | 576 48 92-01 | Collar | 2 |
111 | 576 48 94-01 | Support Wheel | 2 |
112 | 597 91 57-01 | Shaft, Flail mower | 1 |
114 | 598 52 71-01 | Washer | 1 |
115 | 578 85 40-01 | Nut, Wulock | 1 |
CERTIFICATE
Manufacturer: KONEPAJA A. VANNE, KOVA, Veistämöntie 16,
FIN-24800 HALIKKO, FINLAND, hereby certifies that the machine of type T-60367
conforms to Machine Directive 2006/42/EC concerning essential health and
safety requirements in relation to design and manufacture. Issued at Halikko
2011
Declaration of Conformity
In accordance with UK Government Guidance
Product Model / Type: T-60367
Serial numbers dating from 2023 and onwards.
This declaration is issued under the sole responsibility of the product
manufacturer.
The object of the declaration described above is in conformity with the
relevant UK Statutory Instruments and their amendments:
– The supply of Machinery (Safety) Regulations 2008
Issued at Halikko, 31 .1 2.2022
Manufacturer:
Konepaja A. Vanne
Veistämöntie 1 6
FIN-24800
Halikko
FINLAND| UK importer:
Husqvarna Uk Ltd
Preston Road, Co.
Durham
DL5 6UP
---|---
T-60367
Authorized representative for KOVA and responsible for technical documentation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>