PULSEROLLER Senergy Ai Motor Roller Installation Guide
- June 12, 2024
- PULSEROLLER
Table of Contents
PULSEROLLER Senergy Ai Motor Roller
Product Information
- Product Name: SENERGY Motor Roller
- Cable Length:
- SENERGY: 600mm
- SENERGY –
- Ai(M8-4pin): 1000mm
Product Usage Instructions
- Ensure that the fixing bracket is installed on the motor shaft. The fixing bracket is included with the product and should be specified at the time of order.
- Connect the cable to the appropriate connector based on your requirements. Use JST (S) or M8 (M) connector.
- When determining the required clearance, follow the formula: RL = BF – 35 – Customer Required Clearance A. By default, the Customer Required Clearance is set to 2mm unless otherwise specified.
- Refer to the included description chart for detailed information about the product components.
- For any technical support, visit the Pulseroller website at www.pulseroller.com or contact their support team at support@pulseroller.com.
- For sales inquiries, email Pulseroller at sales@pulseroller.com.
Note: This product is designed according to Pulseroller standards and is compatible with a standard 48mm diameter round groove pulley with part number PR-AD-48-xxx-xxZxFQ.
Unless otherwise specificed upon order, Customer Required Clearance is automatically set to 2 mm by Pulseroller USA Order Entry System
INCLUDED ITEMS
- xxx = RL in mm
- xx = Speed Code
PULSEROLLER
- WEB : WWW.PULSEROLLER.COM
- SUPPORT : SUPPORT@PULSEROLLER.COM
- SALES: SALES@PULSEROLLER.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>