BYDENGWIN NSD-W708-007Z Rustic Brown Rectangle MDF End Table User Manual
- June 4, 2024
- BYDENGWIN
Table of Contents
**BYDENGWIN**
NSD-W708-007Z Rustic Brown Rectangle MDF End Table
**User Manual
**
NSD-W708-007Z Rustic Brown Rectangle MDF End Table
ET01 User Manual
-
Put B*2 into the hole of F. -
Insert F into the hole of A2, then connect A2 and C2 with a4.
Please press hard F into the hole of A. Do not tighten the screws during the assembly process. -
Use a4 to connect A2 and E.
Please tighten the screw a to avoid loosening -
Use b*8 to connect D into the assembled frame.
You can turn the end table upside down, align the holes of D and the frame, and finally tighten the screws.
Precautions
Please read this “Precautions” carefully before use to ensure correct use. In
addition, please be sure to follow the “Precautions” because it contains
important safety
information.
Assembly Instructions
When assembling, spread wrapping paper or cloth on the floor to avoid
scratching the floor during installation. Assemble according to the
instruction, and fix the end table firmly with accessory tools and screws.
“Forgetting to tighten the screws” and “loose screws” are extremely dangerous,
so be sure to check again after completion. Precautions for Use
Notice:
Please assemble according to this instruction. If an error occurs during the
assembly process, the assembly may not be completed. Be careful not to
overtighten the bolts with a wrench.
Please use a soft cloth to clean the product. Do not use gasoline, thinner,
alcohol, chemical cloth, etc. to clean the product, as this will damage its
material.
Check whether the bolts and other fixing screws are loose from time to time.
If they start to loosen, please tighten them firmly. Please do not modify the
product, there is a risk of accident or injury.
Notice:
Do not shake, hit or hit with a hammer, etc., as it may be damaged.
Do not use it loosely, it may collapse and cause injury.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>