Brooke Dylan F26 Swimming Pool BT Speaker Instruction Manual
- June 4, 2024
- Brooke Dylan
Table of Contents
Dylan F26 Swimming Pool BT Speaker
Instruction Manual
Swimming Pool BT Speaker
Thanks for buying this product This is a swimming pool Bluetooth speaker, that can use in the swimming pool and bathtub. Please read and keep well this brochure, if any questions or missing in the brochure pls be free to contact us any time, thanks!
Security Issues
- Please read carefully and keep it well for later use.
- Please put the product in a place where children cannot reach it.
- Don’t throw the product.
- Don’t throw it to the fire and keep it away from the heat source because it is the built-in battery.
- To avoid getting an electric shock pls don’t use it without a grounding socket.
- Don’t open it and repair it by yourself.
- Please contact the nearest dealer for after-sales service.
Product Specifications
- Model: F26
- Speaker: 3W/4Ω
- Lithium battery; 3.7V/300mAh
- Playtime; About 75 Min – 3H
- Charging time: About 2-3h
- DC input: DC5V/100mA
- Working temperature: -20~50
- Bluetooth Distance: About 10m
- Bluetooth: V4.2
Product Overview
Connect your phone
Long press the on/off button in 3 seconds and the speaker will turn on, so
open your phone device and open the Bluetooth control interface and then turn
on the Bluetooth. Find the Bluetooth name”F26″, click it and connect it, then
the speaker will say the Bluetooth device is connected successfully.
Charging the Integrated Battery:
This product is powered by an integrated rechargeable lithium battery, a USB
charging cable is included.
Charge the battery as follows:
- Insert the charging cable into the USB socket on the unit.
- Connect the USB plug into a PC or ACDC adaptor. When the blue LED indicator starts to flash,the battery is being charged, charging will take approximately 3 hours. 3. When the battery is fully charged the LED indicator light will go out, remove charging cable.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference. and(2) this device must accept any interference received. including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>