DOMETIC MT SM 65 TL, MT SM 120 TL Portable Solar Module Instruction Manual
- June 12, 2024
- Dometic
Table of Contents
DOMETIC MT SM 65 TL, MT SM 120 TL Portable Solar Module
Product Information
The Power & Control Travel Line consists of two models: MT SM 65 TL and MT SM 120 TL. These are portable solar modules designed for charging gel, flooded, AGM, and LiFePO4 batteries. The modules come with cables and a solar charge regulator for convenient usage.
Technical Description
- Model: MT SM 65 TL, MT SM 120 TL
- Intended Battery Types: Gel, Flooded, AGM, LiFePO4
- Placement Options: Horizontal placement on the ground, Vertical suspension with eyelets, Magnetic surface attachment with magnets in the textile frame
Scope of Delivery
- 1 Portable solar module with cables and solar charge regulator
- 1 Installation and operating manual
Accessories
No additional accessories are included with the product. Ensure that the product is used only for its intended purpose and follow the instructions provided.
Intended Use
The portable solar module is specifically designed for charging gel, flooded, AGM, and LiFePO4 batteries. It should be used in accordance with the provided instructions.
Safety Instructions
General safety instructions should be followed at all times when using the product. Ensure that the device is connected properly and not damaged. Operating the device safely includes using the appropriate cables and following the safety guidelines mentioned in the manual.
Product Usage Instructions
- Choose a suitable location for the solar module. It can be placed horizontally on the ground, suspended vertically with eyelets, or attached to a magnetic surface with magnets in then textile frame.
- Connect the solar module to the battery using the provided cables. Ensure that the connections are secure and properly insulated.
- Refer to the solar charge regulator manual for instructions on configuring and setting up the regulator.
- Position the solar module to receive maximum sunlight exposure. Avoid shading or obstructions that may reduce its efficiency.
- The solar module will start charging the battery when exposed to sunlight. Monitor the charging progress using the solar charge regulator or any other compatible monitoring device.
- Clean and maintain the solar module regularly to ensure optimal performance. Follow the cleaning and maintenance guidelines provided in the manual.
- If not in use, store the solar module in a safe and dry place to prevent any damage.
- In case of any issues or troubleshooting needs, refer to the troubleshooting section in the manual for guidance.
Always follow the safety instructions and warranty terms provided by the manufacturer. Dispose of the product responsibly according to local regulations.
Intended use
Recessed wall light, provided for stationary outdoor use.
Safety Precautions
Package contents
Recessed wall light Installation hardware Mounting instructions.
-
Cut the hole on the wall.
-
Install the embedded box.
-
Daub the gap between embedded box and wall with cement.
-
Put the power cable through the PG9 connector.
-
Wiring and install the bulb(need to separate purchase)
-
Install the housing to embedded box
-
Mount the cover plate and finish the installation.
L : Live conductor
Earth conductor
R: Neutral conductor