City Ergonomics DXT Mouse 3 Wired Ergonomic Vertical Mouse User Manual

City Ergonomics DXT Mouse 3 Wired Ergonomic Vertical Mouse

Welcome to DXT Mouse 3

The DXT Mouse 3 is designed to allow your hand to adopt the position of rest.
The position of rest helps prevent/recover from discomfort/injury while also allowing for accurate cursor movements. www.dxtmouse.com

Package contents

DXT Wired Mouse 3

1. DXT Mouse 3

Product Overview

DXT Mouse 3 Engine

DXT3 wired engine

Download DXT Mouse 3 Engine at www.dxtmouse.com/engine
DXT Mouse engine requirements= Windows only.

Setup

Go to www.dxtmouse.com/videos for more information or scan QR Code.

Holding the DXT Mouse 3

Go to www.dxtmouse.com/videos for videos showing the DXT Mouse 3 in use or scan QR code.

Key Features

Go to www.dxtmouse.com/videos for videos showing key features or scan QR code.

FAQs

Go to www.dxtmouse.com/faqs for information covering FAQs.

Regulatory

Important health information

Use of a keyboard or mouse may be linked to serious injuries or disorders. When using a computer, as with many activities, you may experience occasional discomfort in your hands, arms shoulders, neck, or other parts of your body. If you experience any physical discomfort, you should secure advice from a qualified health professional. For more information on healthy computer use go to www.dxtmouse.com/support.

Warranty information

Valid warranty claims are generally processed through the point of purchase during the first 30 days after purchase: however, this period of time may vary depending on where you purchased the product-please check with City Ergonomics or the retailer where you purchased the product for details. Warranty claims any other product related questions should be addressed directly to City Ergonomics via our contact us page.

2 year limited warranty

City Ergonomics warrants to the original purchaser that this product (and the products name) is free from material and workmanship defects when used under normal conditions for a period of one (2) year from the date of purchase. Should the product contain defects in material or workmanship City Ergonomics will repair or replace the product at our option. Purchaser will be responsible for all costs associated with packing and shipping the product to City Ergonomics and all other freight or insurance costs associated with the return. City Ergonomics will bear the cost of shipping the repaired or replaced product to the purchaser. Product should be returned in its original package accompanied by a proof of purchase, either a sales receipt or other proof that the product is within the warranty period. This warranty is void if the owner repairs or modifies the product or the product has been damaged as a result of misuse. This warranty excludes any liability other than that expressly stated previously, including but not limited to, any incidental or inconsequential damages.

Limitation of Liability

City Ergonomics shall not be responsible for any special, indirect, incidental, or consequential damages whatsoever, including but not limited to loss of profits, revenue or data (whether direct or indirect) or commercial loss for breach of any express or implied warranty on your product even if City Ergonomics has been advised of the possibility of such damages.

Europe- EU Declaration of Conformity

Hereby, City Ergonomics Limited declares that the equipment which is compliance with directive RoHS 2.0 (IEC 62321-3 1:2013 / IEC 62321-4:2013+AMDl:2017 / IEC 62321-5:2013 / IEC 62321-6:2015 / IEC 62321-7-1:2015 / IEC 62321-7-2:2017 / IEC 62321- 8:2017), R.E.D (EN 62479:2010 / EN IEC 62368-1:2020+All:2020 / ETSI EN 301489-1 V2.2.3{2019-11) / ETSI EN 301489-3 V2.l.1(2019-03) / ETSI EN 300440 V2.2.1(2018-07)), EMC Directive (EN SS032:201S+All:2020 / EN IEC 61000-3 2:2019+Al:2021 / EN 61000-3-3:2013+A2:2021 / EN 55035:2017+All:2020), and LVD (EN IEC 62368-1:2020+A11:2020) which are issued by the Commission of the European Community.

The full text of the EU declaration of conformity is available at the following internet address: https://dxtmouse.com/
City Ergonomics Limited hereby confirms, to date, based on the feedback from our suppliers indicates that our products
shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/1V technician for help.
  FCC Caution:
  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment
   To maintain compliance with ICs RF Exposure guidelines, This equipment should be .installed and operated with minimum distance of 5mm the radiator
   your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

CUSTOMER SUPPORT

DXT MOUSE IC: 9638A-HS00019
Made in China
Contact information
©2022 City Ergonomics Limited.
All Rights Reserved.
www.dxtmouse.com/contact

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>