QAZQA 94874 Hoodi HL Small Black and Brass Industrial Hanging Lamp Instructions
- June 12, 2024
- QAZQA
Table of Contents
QAZQA 94874 Hoodi HL Small Black and Brass Industrial Hanging Lamp Instructions
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation .
-
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control part s.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation , maintenance or repair work is undertake n.
-
Exterior lighting must not be installed du r ingrain .
-
Take account o f the minimal separation distance from other objects a nd the room required a round the fitting.
-
If in any doubt, consult a p professional, taking local installation requirements into account. Some countries stipulate that lighting may be in stalled only by registered in stallers .
-
Clomping screws in electrical connections must be adequately tightened . Th is is particularly the case with 12V low voltage conductors.
-
When replacing a halogen lomp, wait for it to cool, for a minimum of 5 minutes.
-
Cleon with a clean , dry cloth or brush, use no solvents or abrasives . Avoid dampness an all electrical components
-
Take account of all available technical information .
-
Take note of the symbols when connecting wires:
-
Meaning of symbols :
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl