gudetama ET-740 Remote Control Egg Vehicle Instruction Manual
- June 12, 2024
- gudetama
Table of Contents
- Product Overview
- Package Contents
- Specifications
- Remote Controller
- Standard Control
- Power On/Off
- Batteries Installation For Remote Control Egg Vehicle
- Batteries Installation For Remote Controller
- Performance Tips
- Care and Maintenance
- IMPORTANT: BATTERY INFORMATION
- FCC Statement
- Documents / Resources
**gudetama ET-740 Remote Control Egg Vehicle Instruction Manual
**
Thank you for purchasing the Remote Control Egg Vehicle. This manual provides more information about this Remote Control Egg Vehicle, please read the instructions before using.
Product Overview
-
Remote Controller Egg Vehicle
-
Remote Controller
-
Instruction Manual
Package Contents
Includes: 1(One) x Remote Control Egg Vehicle
6.6in. x 6.1in. x 6.1in. (16.7cm x 15.5cm x 15.5cm).
1(One) x Remote Control
8.27in. x 2.2in. x 1.3in. (21cm x 5.6cm x 3.4cm).
1(One) x Instruction Manual
Specifications
Remote Control Egg Vehicle Requires:
3(Three) X AA 1.5V Alkaline Batteries
(Not Included)
Remote Control Requires:
2(Two) X AAA 1.5V Alkaline Batteries
(Not Included)
Remote Controller
Standard Control
Note: To avoid losing control, always pay attention when controlling the Remote Control Egg Vehicle.
Control Remote Control Egg Vehicle to move forward
Control Remote Control Egg Vehicle to move backward-right
Power On/Off
Power On/Off
Slide the ON/OFF Switch to ON to turn on the Remote Control Egg Vehicle. Slide
the ON/OFF Switch to OFF to turn off the Remote Control Egg Vehicle.
Batteries Installation For Remote Control Egg Vehicle
To install batteries into the Remote Control Egg Vehicle, unscrew the screw on the battery box cover to open the cover. Insert 3(Three) X AA 1.5V Alkaline Batteries (Not Included) into the battery box. Ballades should be placed as shown on the diagram. Replace the battery box cover and tighten the screw.
Notice:
When inserting the batteries, you must insert according to the correct
polarity, the Remote Control Egg Vehicle won’t function if batteries are
reversed.
Batteries Installation For Remote Controller
To install batteries into the Remote Control, unscrew the screw on the battery box cover to open the cover. Insert 2(Two) X MA 1.5V Alkaline Batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw.
Notice:
When inserting the batteries, you must insert according to the correct
polarity, the Remote Control won’t function if batteries are reversed.
Performance Tips
1. Do not drive the Remote Control Egg Vehicle on grass, sand or go through water. 2. Do not drive the Remote Control Egg Vehicle in windy or rainy weather. 3. Do not drive the Remote Control Egg Vehicle into any sharp object. 4. Keep fingers, hair and loose clothing away from Remote Control Egg Vehicle.
Care and Maintenance
Always use dry and soft cloth to clean this product.
Avoid this product from being exposed to sunlight or heat.
Avoid immersing these toys in water, otherwise, the electronic parts may be
damaged.
Check the product regularly. If any damages are discovered, please stop using
immediately, until it is completely repaired in good working condition.
IMPORTANT: BATTERY INFORMATION
For AA Batteries
WARNING: TO AVOID BATTERY LEAKAGE
- Be sure to insert the batteries correctly, and always follow the toy/game and battery manufacturers’ instructions.
- Do not mix old and new batteries or alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Always remove weak or dead batteries from the product.
- Remove the battery if the product is left unused for a long period of time.
For MA Batteries
WARNING: TO AVOID BATTERY LEAKAGE
- The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222).
- Always purchase the correct size and grade of battery most suitable for intended use.
- Do not mix old and new batteries, alkaline, standard (Carbon – Lnc) or rechargeable (Nickel-cadmium) batteries.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with the regard to polarity (+ and -).
- Always remove batteries if consumed or if product is to be left unused for a long time.
Warning
This product is suitable to be used by people who has operating experience in
remote toy or aged no less than 8 years old.
Please do not put the product in your mouth to prevent choking hazard of small
parts.
Please do not put the finger into available interspaces.
Please do not play the product in a brutal way such as throwing, crashing or
twisting it.
Please store the smaller-sized product accessories in places that are out of
reach of children, in order to avoid the occurrence of accidents.
Avoid placing the batteries in places in high temperatures and avoid exposure
to heat.
When young children are operating the product, it shall be ensured that the
adults are guiding and making sure the product control is within the viewing
range of the controller (or instructor) so that it makes the control of the
toy more convenient.
When the product is not in use, please switch off the power supplies of the
toy, and remove the batteries from the product.
Please note that we won’t take any responsibility for any wrong operation as
this may result in severe injury or loss of property, and we cannot control
the operating process during the time when the user assembles or uses this
product.
Once this product is sold, we won’t be responsible for any safety
responsibility during the time the user operates or uses controls this
products.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responstie for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Item# ET-0740
FCFCC ID: 2ADM5-ET-0740-27
Keep All Relevant Information for Future Reference
© 2023 SANRIO CO., LTD.
TM and ® denote U.S. Trademarks
Used Under License.
www.sanrio.com
SIL-35018
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
MADE IN SHANTOU,CHINA
Follow @gudetama on social media
and @gudetamatweets on Twitter
Documents / Resources
|
gudetama ET-740 Remote Control Egg
Vehicle
[pdf] Instruction Manual
ET-0740-27, 2ADM5-ET-0740-27, 2ADM5ET074027, ET-740, ET-740 Remote Control Egg
Vehicle, Remote Control Egg Vehicle, Egg Vehicle
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>