Shanghai Sunmi Technology Co Ltd 2AH25SCRADLE SCRADLE Scanner Cradle User Guide

June 12, 2024
Shanghai Sunmi Technology Co Ltd

**Shanghai Sunmi Technology Co Ltd 2AH25SCRADLE SCRADLE Scanner Cradle User Guide

**

Quick Start

  1. Camera Window
  2. Scan Area
  3. Device Area
  4. PogoPin
  5. Reset Hole(Reset Hole used for reset Cradle WiFi.)
  6. RJ11(Optional)
  7. USB Type A Port
  8. Type C Port
  9. Ethernet Port (Optional)
  10. Rotating Base (optional)

Product Profile

The scanner cradle provides charging, USB port expansion, and Wi-Fi Internet access functions for Smart Payment Terminal. Put the POS on the Scanner Cradle, then it will start charging , cradle now can scan code ,and pos can access internet through the Cradle(optional). If you need to change the WiFi configuration of the POS Base , First remove the network cable of the Ethernet interface, connect the host to the POS Base WiFi, enter “192.168.1.1” on the host’s browser page, enter the router setting system (account: admin, password: admin), and enter “Wireless-Hotspot Settings” to set the WiFi name and password.

Product Profile

When you notice an unusual smell, overheating or smog, turn off the power immediately. Do not use in extremely hot and cold environments, such as near fire or lit cigarettes; Try to use it in a clean, dust-free environment to prevent small items from falling into the terminal; Do not use it near medical equipment without permission.

Statements
The company is not responsible for the following actions. Damage caused by use and maintenance without the conditions described in this guide; The company will not be responsible for any damages or problems caused by the alternatives or consumables (not the original products or approved products provided by the company). Without consent of the company. It is not authorized to make product modifications or changes.

Disclaimer
Due to product updates, some details of this document may not match the product, please refer to the actual product, and the right to interpret this document belongs to the company. The right to modify this guide without prior notice is reserved.

Technical specifications

For more technical specifications, please visit: www.sunmi.com.

  • The product information listed on this page may be updated from time to time due to product upgrades or other reasons. SUNMI reserves the right to modify the product informtion and contents on this page without notice.

 EU Representative :SUNMI France SAS186,avenue Thiers,69006 Lyon, France This device complies with the basic recommendations and other relevant measures in the 2014/30/EU and 2014/35/EU directive.

 This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling.

 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,icluding interference that may cause undesired operation.

Conformity CE

Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://developer.sunmi.com/docs/read/en-US/maaeghjk480

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: The user is cautioned that changes or modifictions not expressly approved by the party responsible for complliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Canada compliance statements

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interf- erence that may cause undesired operation of the device.
This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matériel est conforme aux limites de dose d’exposition aux rayonnements, CNR-102 énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals