KrIPSOL VS 150 Swimming Pool Pumps Instructions
- June 12, 2024
- KRIPSOL
Table of Contents
KrIPSOL VS 150 Swimming Pool Pumps
Product Information
- Product Name: KSE VS 150
- Product Type: Pumps & Electrical Cabinets
- Features:
- Variable speed: high efficiency for each application, optimized consumption
- 5 programs, 3 preselected speeds
- Super-silent operation
- Visibility of the internal prefilter, easy access
- Double drain, easy opening (no tools required)
- Permanent magnet motor
- Usage: Suitable for residential pools up to 126 m3
- Prefilter size: 3.5L
- Code: KSE VS 150
- Input Power (P1): 1104W
- Output Power (P2): 1250W
- Amps (A): 5.9A
- Flow Rate: 605 m3/h (at 10m water column pressure)
- Weight: 15kg
- Packaging Dimensions: 300mm x 255mm x 650mm
Product Usage Instructions
- Ensure that the pump is turned off and disconnected from the power source before installation or maintenance.
- Choose the appropriate union fitting (50mm or 63mm diameter) and connect it to the existing installation.
- Place the KSE VS 150 pump in a suitable location near the pool.
- Connect the union fitting of the pump to the existing installation.
- Make sure the pump is securely connected and all connections are tight.
- Fill the prefilter with water to prime the pump.
- Turn on the power supply and set the desired speed or program using the control panel.
- Monitor the pump’s operation and adjust settings as needed.
- To access the internal prefilter or perform maintenance, ensure that the pump is turned off and disconnected from the power source. Open the double drain without using any tools.
Note: Single Speed models can be easily replaced with a VS (Variable Speed) equivalent without the need for retrofitting or modifying hydraulic connections. The maximum water temperature andpressure, as well as other connection types, can be obtained by contacting the manufacturer.
Introduction
- Variable speed: high efficiency for each application, optimised consumption
- 5 programs, 3 preselected speeds
- Super-silent operation
- Visibility of the internal prefilter, easy access
- Impeller and diffuser made of Noryl®, very hard-wearing and corrosion-resistant
- Double drain, easy opening (no tools required)
- Permanent magnet motor
- Usage: for residential pools up to 126 m3
- Prefilter size: 3.5L
Union fittings provided, 50 and 63 mm diameter, to fit in any existing installation
Information
P1 Input power – P2 Output power * 10 m water column pressure M.O.Q. :1
Single Speed models can be easily replaced with a VS equivalent.
(No need to retrofit or modify hydraulic connections).
Technical Specifications
- Max. water temp. / Max. pressure 50ºC / 2,5 bar
- Connection (DIN slip included,
- for others please ask) Ø 50 – 1 ½” and Ø 63 – 2″
- Mechanical seal AISI 316, suitable for salt water
- Motor specifications Class F, IP55, 50 Hz 2.850 rpm
- Housing/impeller/strainer/lid PP + F.G/Noryl®/PP/SAN
*All bodies have a 2” thread, possibility of having AINSI connection
Dimension
Water column pressure (m)
Warranty
- 3 YEARS OF WARRANTY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>