WISUALARM DHI-HY-M1 Air Quality Monitor User Manual
- June 12, 2024
- WISUALARM
Table of Contents
- WISUALARM DHI-HY-M1 Air Quality Monitor
- Product Usage Instructions
- Product Introduction
- Accessories
- Screen Display
- How to use
- Daily monitoring
- Power Button Function & Indication Light Status Introduction
- Emoji Introduction
- Attention
- Trouble Shooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WISUALARM DHI-HY-M1 Air Quality Monitor
Product Information: The product is a versatile blender that is designed to blend, chop, and puree various ingredients. It features a powerful motor that ensures efficient and quick blending. The blender comes with a large- capacity jug made of durable BPA-free plastic, along with a stainless steel blade assembly for optimal blending performance. It also includes multiple speed settings and a pulse function for precise control over blending consistency.
Product Usage Instructions
- Before using the blender for the first time, make sure to wash all the removable parts (jug, lid, and blade assembly) with warm soapy water.
- Place the jug on the base unit, ensuring it is properly aligned and securely locked in place.
- Add the desired ingredients to the jug. For best results, avoid overfilling the jug beyond the maximum capacity indicated.
- Place the lid onto the jug, making sure it is tightly sealed to prevent any spills during blending.
- Plug in the blender and select the desired speed setting based on the ingredients being blended. Use lower speeds for softer ingredients and higher speeds for harder ingredients.
- For additional control, use the pulse function by pressing the pulse button in short bursts. This is ideal for achieving a coarser texture or for evenly mixing ingredients.
- Once you have selected the desired speed or pulse function, press the power button to start blending.
- During blending, hold onto the jug handle firmly to keep it stable on the base unit.
- Blend until you achieve the desired consistency. If needed, you can stop and scrape down the sides of the jug with a spatula to ensure even blending.
- After blending, unplug the blender from the power source and carefully remove the jug from the base unit.
- For cleaning, disassemble the blender by removing the jug, lid, and blade assembly. Wash these parts with warm soapy water and rinse thoroughly. The removable parts are also dishwasher-safe.
- Dry all the parts before reassembling the blender for future use.
Please read this manual carefully before using the product and keep it properly.
What is carbon dioxide (CO,)?
Carbon dioxide (COz) is a colorless, odorless gas that is produced by
metabolic processes, combustion processes, and motor cars operating in
garages. People and other animals exhale carbon dioxide when they breathe.
Although carbon dioxide alone is not dangerous, the quantity found inside is
utilized as a gauge for human comfort. The majority of the time, CO2 poses a
health risk when its concentration is high enough to displace oxygen and cause
suffocation in small spaces.
What is the effect of exposure to high-level carbon dioxide?
In buildings with increased CO, occupants may have health problems. The carbon
dioxide itself can produce headaches, lightheadedness, nausea, and other
symptoms at high concentrations. This could happen after many hours of
exposure to levels higher than 5,000 ppm. Exposure to CO, concentrations about
40,000 ppm is instantly hazardous to life and health since it can asphyxiate
at much greater levels by replacing oxygen in the blood.
What should I do if the Air Quality Monitor goes off?
When the carbon dioxide concentration reaches a high level, the product will
emit an audible signal and a red LED goes on. For your safety, please
ventilate your rooms:
- Open doors and windows
- Turn on mechanical ventilation systems such as HVAC systems
Product Introduction
- The product can monitor indoor temperature, humidity, and CO, concentration to easily master indoor air quality.
- The 4.2-inch extra-large E-ink screen is used as the display screen, which can provide a paper-like display texture and a clear multi-view angle.
Attention: Please avoid blocking the vent hole when using the monitor.
Accessories
USB Type-C Charging Cable
Note: The illustrations of products, accessories, user interface, etc. in
the manual are schematic diagrams for reference only. Due to product updates
and upgrades, the actual products may be slightly different from the schematic
diagrams. Please refer to the actual products.
Screen Display
How to use
Before use
Please charge the monitor before the first use. At the same time, turn on the
monitor and ventilate for more than 24 hours. There is no need to operate the
monitor during ventilation. Remove the pollutants (if any) on the sensor from
the package or the interfering gases. Meanwhile, the product will be self-
calibrated to ensure the accuracy of subsequent measurements. When testing,
please place the product upright on the object platform where testing is
performed, such as the desk or workbench. Please avoid holding the tester or
blocking the vent hole.
Daily monitoring
Turn on the monitor
Press the power button for 3 seconds to turn on the monitor.
Start Monitoring
After warming up for 5 minutes, the monitor enters the monitoring mode, and
the screen displays the CO, value detected in real-time. At this time, the
user could take the monitor to the place to be monitored for about 5 minutes,
then read the current value through the screen.
Turn off the monitor
In the monitoring mode, press the power button for 3 seconds to turn off the
monitor.
Charging
This product uses a lithium battery for power supply. When the low battery
symbol ” ” is displayed on the screen, it indicates that the monitor has low
power and needs to be charged. Please insert the charging cable’s USB Type-C
connector into the charging port on the back of the monitor and the USB Type-A
connector into the power adapter for charging. The product can be fully
charged about 6 hours after being connected to the power supply.
Note:
Please use a 5V USB power supply for charging and ensure that the output
current is greater than 1A. If the monitor is not used for a long time, please
charge it regularly. It is recommended to charge it at least every 3 months.
Restore default settings
Long press the power button (hold for at least 16 seconds) until the monitor
refreshes the screen, then restart the monitor to restore the default
settings.
Power Button Function & Indication Light Status Introduction
Note: When the buzzer alarm occurs, you can click the button to turn off the buzzer.
Emoji Introduction
- Technical Parameters
- Product Model: DHI-HY-M1
- Power Input: DC 5V 1A
- Battery Model: 2500mAh rechargeable lithium battery
- Product Material: PC/ABS
- Net Weight: 148g
- Product Size: 108*91×43.7mm
- CO2 Measurement Range: 400-5000 ppm
- Temperature Measurement Range: 0°C- 60°C
- Humidity Measurement Range: 0% ~ 99%RH
- Temperature Units: C/’F
- Operating Temperature and Humidity Range: 0°C- 50°C, 10% ~ 90%RH
- Operating Atmospheric Pressure Range: 70kPa~106kPa
- Transportation and Storage Requirements of Temperature and
- Humidity: -20°C- 60°C, 10% ~ 95%RH
- Transportation and Storage Requirements of Atmospheric
- Pressure: 50kPa~106kPa
Attention
- Do not block the vent hole.
- Try to avoid long-term use of the monitor at high temperatures and humidity environments.
- Do not face the monitor directly to the household ventilation appliance or it will cause measurement deviation.
- If the charging cable is damaged, it shall be replaced with a special cable or a special component purchased from its manufacturer or maintenance department.
- Lithium battery is dangerous. The user shall not attempt to remove the battery. Forcibly removing or replacing the battery may cause an explosion.
- The battery may also cause an explosion if it is thrown into the fire.
- Keep the battery and monitor dry, and away from water or other liquids to avoid short circuits.
- Do not use the battery if it is damaged, deformed, discolored, overheated, or smells unpleasant.
- Dispose of the wasted battery according to the manufacturer’s instructions.
Trouble Shooting
Unable to turn on the monitor on the first use. Please charge the monitor for a couple of minutes then turn on it. Please use an adapter with a voltage of 5V and an output current of more than 1A for charging. All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
WISUALARM TECHNOLOGY
For more information, please visit
www.wisualarm.com/en
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>