WILLIAMS-SONOMA Anton 49 Bathroom Vanity Instruction Manual

WILLIAMS-SONOMA Anton 49 Bathroom Vanity

Product Information

The product is an assembly kit for a vanity console manufactured by Williams- Sonoma Inc. It is designed to be mounted on both the wall and floor. Please note that some additional hardware items required for proper assembly and installation, such as shims, spacers, and high-quality silicone or acrylic- based bath sealant, are not included. Plumbers putty or any oil-based sealant should not be used as it may stain the marble. Cutting of the baseboard and drilling may be necessary to mount the console base to the wall.

Product Usage Instructions

1. Before assembly, ensure that you have all the required tools. Refer to the “Tools Required” section in the instructions for a list of necessary tools.
2. Check the contents of the box. If purchased without a countertop, refer to page 16 for recommended custom countertop dimensions.
3. If securing the vanity to the wall, it is essential to use the proper hardware for your wall type. Consult your local hardware store for assistance in selecting the appropriate hardware. Mounting to wood studs is recommended whenever possible.
4. Measure the location of the plumbing in the wall and mark the back panel of the case accordingly. Cut holes in the back panel for the plumbing to pass through.
5. Position the base against the wall in the desired placement. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
6. If needed, drill new holes in the top back rail of the vanity to align with the wood studs.
7. Follow the remaining assembly instructions provided in the user manual to complete the installation of your vanity console.

Please note that these instructions are a summary. For detailed assembly instructions, please refer to the complete user manual provided by Williams- Sonoma Inc.

PROFESSIONAL INSTALLATION REQUIRED – CONTRACTOR AND PLUMBER needed for

Installation.

• Please read all instructions carefully before assembling.
• For your safety, assembly by two or more adults is strongly recommended.
• Keep instructions for future use.
• Use only vendor-supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
• The Vanity Base must be secured to the wall. Wall attachment hardware is not included. For safe mounting, it is essential to use the proper hardware for your wall type. If walls are drywall or wood studs, concrete, brick, or plaster, please consult your local hardware store for assistance in selecting the appropriate hardware.
• Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
• DO NOT USE THE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE.

Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall.

PRE-ASSEMBLY

• Remove all parts and hardware from the box and layout on a clear carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
• Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists below to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split wood.
• Keep all parts out of the reach of children.
• A standard 8″ spread faucet should be used with this Marble top console.

Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
DO NOT USE THE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE. NoTool Required
(NOTE: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall.

Tool Required (NOT INCLUDED / NON-INCLUS / NO INCLUIDAS)

BOX CONTENTS

Tool Included

THE VANITY MUST BE SECURED TO THE WALL

NOTE: For safe mounting, it is essential to use the proper hardware for your wall type. The hardware is not included, please consult your local hardware store for assistance in selecting the appropriate hardware. Mount to wood studs whenever possible. Measure the location of the plumbing locations in the wall. Mark the back panel of the case corresponding to the location of the plumbing. Cut holes in the back panel for the plumbing to pass through. Move the BASE to the desired placement against the wall. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
NOTE: New holes can be drilled in the top back rail of the vanity to properly align with the wood studs.

Tools Required (not included)

To Seal The Connection Between The Basin Edge And The Bottom Of The Stone Top. Caulking must be Silicon or Acrylic based. Plumbers putty must not be used as it will stain the stone top.

To Seal The Connection Between The Bottom Of The Stone Top And The Top Of The Wood Vanity Top.

Caulking must be Silicon or Acrylic based. Plumbers putty must not be used as it will stain the stone top.

If purchased with No Countertop, see below recommended custom countertop dimensions

© 2020 Williams-Sonoma, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>