WILLIAMS-SONOMA Anton 78 Bathroom Vanity Instruction Manual

June 12, 2024
WILLIAMS SONOMA

WILLIAMS-SONOMA Anton 78 Bathroom Vanity

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-product

Product Information
The product is a vanity console manufactured by Williams-Sonoma Inc. It requires assembly and comes with assembly instructions in multiple languages. The manual also provides important information regarding the installation process and necessary tools.

Product Usage Instructions

1. Leveling and Mounting:

  • Consoles usually need to be leveled and mounted to both the wall and floor.
  • Note that some cutting of the baseboard and drilling may be necessary to mount the console base to the wall.

2. Hardware Requirements:

  • Some hardware items needed for proper assembly and installation are not included in the package. These may include shims, spacers, high-quality silicone, or acrylic-based bath sealant.
  • Do not use plumbers putty or any oil-based sealant as it may stain the marble.

3. Pre-Assembly:

  • Before starting the assembly process, carefully read through
    all the instructions were provided.

4. Tools Required:

  • The tools required for assembly are not included in the package. Ensure you have the necessary tools before starting the assembly process.

5. Box Contents:

  • Box 1 of 2: A
  • Box 2 of 2: B, C, D, 2x EC, 1x F, 2x G, 1x H, 1x I, 1/4×3/4L 16X, 1/4×1-1/2L 8X, 45x20x3mm 8X
  • If purchased without a countertop, refer to page 17 for recommended custom countertop dimensions.

6. Assembly Steps:

  1. Follow the provided instructions and diagrams to assemble the vanity console.
  2. Ensure the vanity is securely mounted to the wall. For safe mounting, use the proper hardware suitable for your wall type. Consult your local hardware store for assistance in selecting the appropriate hardware.
  3. Measure the location of the plumbing in the wall and mark the corresponding location on the back panel of the case.
  4. Cut holes in the back panel for the plumbing to pass through.
  5. Move the base of the console to the desired placement against the wall. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
  6. If necessary, drill new holes in the top back rail of the vanity to align with the wood studs.

Note: The manual provides additional usage instructions in French and Spanish languages.

PROFESSIONAL INSTALLATION REQUIRED – CONTRACTOR AND PLUMBER needed for Installation.

  • • Please read all instructions carefully before assembling.
    • For your safety, assembly by two or more adults is strongly recommended.
    • Keep instructions for future use.
    • Use only vendor-supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
    • The Vanity Base must be secured to the wall. Wall attachment hardware is not included. For safe mounting, it is essential to use the proper hardware for your wall type. If walls are drywall or wood studs, concrete, brick, or plaster, please consult your local hardware store for assistance in selecting the appropriate hardware.
    • Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
    • DO NOT USE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE.

Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall. PRE-ASSEMBLY:

  • • Remove all parts and hardware from the box and layout on a clear carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
    • Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid accidentally discarding small parts or hardware.
    • Use the parts and hardware lists below to identify and separate each of the pieces included.
    • The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
    • The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split wood.
    • Keep all parts out of the reach of children.
    • A standard 8″ spread faucet should be used with this Marble top console.

Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and installation are not included: ex. shim, spacer, high-quality silicone or acrylic-based bath sealant, etc.
DO NOT USE THE PLUMBER’S PUTTY OR ANY OIL-BASED SEALANT AS THIS WILL STAIN THE MARBLE.
Note: Some cutting of the baseboard, and drilling may be necessary to mount the console base to the wall.

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-1

THE VANITY MUST BE SECURED TO THE WALL

NOTE: For safe mounting, it is essential to use the proper hardware for your wall type. The hardware is not included, please consult your local hardware store for assistance in selecting the appropriate hardware. Mount to wood studs whenever possible.
Measure the location of the plumbing locations in the wall. Mark the back panel of the case corresponding to the location of the plumbing. Cut holes in the back panel for the plumbing to pass through. Move the BASE to the desired placement against the wall. Use a  sharp pencil or a screw to mark the wall through the holes on the top rail.
NOTE: New holes can be drilled in the top back rail of the vanity to properly align with the wood studs.

Tools Required (not included)

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-2

BOX CONTENTS

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-3

Tool Included

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-4

INSTALLATION

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-5

THE VANITY MUST BE SECURED TO THE WALL.
NOTE: For safe mounting, it is essential to use the proper hardware for your wall type. The hardware is not included, please consult your local hardware store for assistance in selecting the appropriate hardware. Mount to wood studs whenever possible.
Measure the location of the plumbing locations in the wall. Mark the back panel of the case corresponding to the location of the plumbing. Cut holes in the back panel for the plumbing to pass through. Move the BASE to the desired placement against the wall. Use a sharp pencil or a screw to mark the wall through the holes on the top rail.
NOTE: New holes can be drilled in the top back rail of the vanity to properly align with the wood studs.

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-6

To Seal The Connection Between The Basin Edge And The Bottom Of The Stone Top. Caulking must be Silicon or Acrylic based. Plumbers putty must not be used as it will stain the stone top.

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-7

To Seal The Connection Between The Bottom Of The Stone Top And The Top Of The Wood Vanity Top. Caulking must be Silicon or Acrylic based.

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-8WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-9
Plumbers putty must not be used as it will stain the stone top.

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-9

If purchased with No Countertop, see below recommended custom countertop dimensions

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-12

DIMENSIONS

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-13

If purchased with No Countertop, see below recommended custom countertop dimensions

WILLIAMS-SONOMA-Anton-78-Bathroom-Vanity-fig-14

2020 Williams-Sonoma, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

WILLIAMS SONOMA User Manuals

Related Manuals