TRAXXAS 82044-4 TRX-4 Sport High Trail Instructions
- June 12, 2024
- Traxxas
Table of Contents
- TRAXXAS 82044-4 TRX-4 Sports High Trail
- Product Information
- Product Usage Instructions
- Axle Components
- Bearings & Bushings
- Body (1972 Chevrolet® Blazer®)
- Body (1979 Chevrolet® Blazer®)
- Body (Mercedes-Benz® G 500®)
- Body (Tactica Unit)
- 8011 series bodies)**
- Body (TRX-4® Sport)
- 8028 power supply)**
- 8028 power supply)**
- 8028 power supply)**
- 8112 body)
- 8112 body)**
- Body Accessories
- Bumpers & Skidplates
- 2260 BEC)/ foam pads/ seals/ silicone grease**
- Differential Components
- 8028 power supply)**
- 8028 power supply)**
- 8028 power supply)**
- 8112 body)**
- 8140X TRX-4® Long Arm Lift Kit)**
- 2843X 5800mAh 7.4V 2-cell 25C LiPo iD® battery (1))**
- 2849X 4000mAh 11.1v 3-Cell 25C LiPo iD® battery (1))**
- 6551X GPS module)**
- 6550X telemetry expander)**
- Springs
- 8255A extended stub axle)**
- 8255A extended thread stub axle)**
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TRAXXAS 82044-4 TRX-4 Sports High Trail
Product Information
The product is a remote-controlled car model. It includes various parts and
accessories that can be used to customize the car’s appearance and
performance.
The product includes the following parts and accessories:
- 8241
- 8242
- 8227
- 8228
- 8229
- 8060
- 8062
- 8230
- 8231
- 8063
- 8061
- 8147
- 9283
- 8233
- 8256
- 8256X
- 8256A
- 8256G
- 8256R
- 8252
- 8253
- 8251
- 8064
- 8257
- 8259
- 8065
- 8258
- 8252X
- 8252A
- 8252G
- 8252R
- 8253X
- 8253A
- 8253G
- 8253R
- 8251X
- 8251A
- 8251G
- 8251R
- 8255
- 8255A
- 8267
- 5119A
- 5120A
- 5104A
- 5115A
- 5116A
- 5114A
- Axle Components
- Bearings & Bushings
- Ball bearings, black rubber sealed (10x15x4mm) (2)
- Ball bearings, black rubber sealed (12x18x4mm) (2)
- Ball bearings, black rubber sealed (4x10x4mm) (2)
- Ball bearings, black rubber sealed (5x10x4mm) (2)
- Ball bearings, black rubber sealed (5x11x4mm) (2)
- Ball bearings, black rubber sealed (5x8x2.5mm) (2)
- Ball bearings, black rubber sealed (6x12x4mm) (2)
- Ball bearings, black rubber sealed (6x13x5mm) (2)
- Ball bearings, black rubber sealed (7x14x5mm) (2)
- 9112
- 9131
- 9133
- 9131-BLK
- 9112X
- 9125
- 9127
- 9124
- 9113
- 6593
- 9115
- 9123
- 8091
- 8090
- 9116
- 9121
- 6592
- 6591
- 8090X
- 6594
- 9122
- 9111
- Body, Chevrolet Blazer (1972) (clear, requires painting) (includes grille, side mirrors, side trim, door handles, windshield wipers, decals, window masks)
- 9130
- Body, Chevrolet Blazer (1972) (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, windshield wipers, clipless mounting, hardware) (requires #8072X inner fenders)
- 9130-
- Body, Chevrolet Blazer (1972), complete, blue & white (painted) BLWT (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
- 9130-BLUE Body, Chevrolet Blazer (1972), complete, blue (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
- 9111X
- Body, Chevrolet Blazer (1972), complete, blue (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals)
- 8130T
- 8130X
- 8130R
- 8131
- 6593
- 8132
- 8134
- 8082
- 8039
- 8038
- 8133X
- 8133
- 6592
- 6591
- 8038X
- Body, Chevrolet Blazer (1979), complete (black) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals)
- Body, Chevrolet Blazer (1979), complete (orange) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals)
- Body, Chevrolet Blazer (1979), complete (red) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals)
- Decal sheet, Chevrolet Blazer (1979)
- Door handles, left, right & rear tailgate/ windshield wipers, left & right/ retainers (2)/ 1.6×5 BCS (self-tapping) (7) (fits #8130 series bodies)
- Grille, Chevrolet Blazer or K10 Truck (1979)/ grille retainers (4)/ headlight housing (2)/ lens (2)/ 2.6×8 BCS (4)/ 2.5×6 BCS (2) (fits #8130 or 9212 series bodies)
- LED light set (contains headlights, tail lights, side marker lights, & distribution block) (fits #8130 series bodies, requires #8028 power supply)
Product Usage Instructions
To use the product, follow these steps:
- Choose the desired parts and accessories from the list provided.
- Assemble the selected parts according to the instructions provided in the user manual.
- If any parts require painting, ensure that they are painted before installation.
- For body customization, select the appropriate Chevrolet Blazer body model and color.
- If required, install the inner fenders (#8072X) for proper fitting of the chosen body.
- Follow the instructions for attaching the grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals, and clipless mounting.
- If using the LED light set (#8028), connect it to the power supply as specified in the manual.
If you need further assistance or have any questions, please contact our customer support team at 1-888-TRAXXAS or email us at support@Traxxas.com.
Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.
|
Axle Components
---|---
8241| Axle housing, front
8242| Axle housing, intermediate (TRX-6™) or rear (TRX-4®)
8227| Axle mount set (complete) (front & rear) (for suspension links)
8228| Axle shaft, front (left)/ drive pin/ cross pin
8229| Axle shaft, front (right)/ drive pin/ cross pin
8060| Axle shaft, front, heavy duty (left & right) (requires #8064
front portal drive input gear)
8062| Axle shaft, front, heavy duty (left & right)/ portal drive input
gear, front (machined) (2) (assembled)
8230| Axle shaft, rear (left)
8231| Axle shaft, rear (right)
8063| Axle shaft, rear, heavy duty (left & right) (requires #8065 rear
portal drive input gear)
8061| Axle shaft, rear, heavy duty (left & right)/ portal drive input
gear, rear (machined) (2) (assembled)
8147| Cable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)
9283| Cable, T-lock, rear (185mm)
8233| Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
8256| Portal drive axle mount, rear (left & right)
8256X| Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized)
(left and right)/ 2.5×16 CS (4)
8256A| Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray-
anodized) (left and right)/ 2.5×16 CS (4)
8256G| Portal drive axle mount, rear, 6061-T6 aluminum (green-
anodized) (left and right)/ 2.5×16 CS (4)
8256R| Portal drive axle mount, rear, 6061-T6 aluminum (red-anodized)
(left and right)/ 2.5×16 CS (4)
8252| Portal drive housing, inner, front (left & right)/ 2.5×4 BCS (6)
8253| Portal drive housing, inner, rear (left or right) (2)
8251| Portal drive housing, outer (front or rear) (2)
8064| Portal drive input gear, front (machined) (left or right)
(requires #8060 front axle shaft)
8257| Portal drive input gear, front/ drive pin/ cross pin
8259| Portal drive input gear, rear
8065| Portal drive input gear, rear (machined) (left or right)
(requires #8063 rear axle)
8258| Portal drive output gear, front or rear
8252X| Portal housings, inner (front), 6061-T6 aluminum (blue-
anodized) (2)/ 3×12 BCS (2)
8252A| Portal housings, inner (front), 6061-T6 aluminum (charcoal
gray- anodized) (2)/ 3×12 BCS (2)
8252G| Portal housings, inner (front), 6061-T6 aluminum (green-
anodized) (2)/ 3×12 BCS (2)
8252R| Portal housings, inner (front), 6061-T6 aluminum (red-anodized)
(2)/ 3×12 BCS (2)
8253X| Portal housings, inner (rear), 6061-T6 aluminum (blue-anodized)
(2)/ 2.5×10 CS (2)
8253A| Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-
anodized) (2)/ 2.5×10 CS (2)
8253G| Portal housings, inner (rear), 6061-T6 aluminum (green-
anodized) (2)/ 2.5×10 CS (2)
8253R| Portal housings, inner (rear), 6061-T6 aluminum (red-anodized)
(2)/ 2.5×10 CS (2)
8251X| Portal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/
2.5×10 CS (12)
8251A| Portal housings, outer, 6061-T6 aluminum (charcoal gray-
anodized) (2)/ 2.5×10 CS (12)
8251G| Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/
2.5×10 CS (12)
8251R| Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/
2.5×10 CS (12)
8255| Stub axle (portal drive) (2)
8255A| Stub axle, extended thread (portal drive) (2)
8267| Weight, portal housing, brass (2) (34 grams)/ 2.5×8 CS (6)
(requires #8251X, 8251R, 8251A, or 8251G outer portal housing)
|
Bearings & Bushings
5119A| Ball bearings, black rubber sealed (10x15x4mm) (2)
5120A| Ball bearings, black rubber sealed (12x18x4mm) (2)
5104A| Ball bearings, black rubber sealed (4x10x4mm) (2)
5115A| Ball bearings, black rubber sealed (5x10x4mm) (2)
5116A| Ball bearings, black rubber sealed (5x11x4mm) (2)
5114A| Ball bearings, black rubber sealed (5x8x2.5mm) (2)
5117A| Ball bearings, black rubber sealed (6x12x4mm) (2)
---|---
5180A| Ball bearings, black rubber sealed (6x13x5mm) (2)
5103A| Ball bearings, black rubber sealed (7x14x5mm) (2)
| Body (1969 Chevrolet® Blazer®)
9112| Body, Chevrolet Blazer (1969 – 1970) (clear, requires painting)
(includes grille, side mirrors, door handles, windshield wipers, decals,
window masks)
9131| Body, Chevrolet Blazer (1969) (clear, requires painting)/
decals/ window masks (includes grille, side mirrors, door handles, windshield
wipers, clipless mounting, hardware) (requires #8072X inner fenders)
9133| Body, Chevrolet Blazer (1969) (clear, requires painting)/
decals/ window masks (requires #8072X inner fenders)
9131-BLK| Body, Chevrolet Blazer (1969), complete, black (painted)
(includes grille, side mirrors, door handles, windshield wipers, front & rear
bumpers, clipless mounting) (requires #8072X inner fenders)
9112X| Body, Chevrolet Blazer (1969), complete, black (painted)
(includes grille, side mirrors, door handles, windshield wipers, front & rear
bumpers, decals)
9125| Bumper pads/ bumper guards (chrome)/ 2.5×12 BCS (4)/ 2.7mm drill
bit (fits #9126 or #9127 front bumpers)
9127| Bumper, front (chrome)/ bumper mount/ 3×10 BCS (2)
9124| Bumper, rear (chrome)/ bumper mount/ 3×10 BCS (2)
9113| Decal sheets, Chevrolet Blazer (1969 – 1972)
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
9115| Door handles, left, right, and rear/ retainers (3)/ windshield
wipers, left & right/ retainer (1)/ fuel cap/ fuel flange/ fuel cap mount/
1.6×5 BCS (self-tapping) (7)/ 2.6×8 BCS (1)
9123| Grille, Chevrolet Blazer (1969 – 1970)/ grille retainers (5)/
headlight housing (2)/ headlight lens (2)/ turn signal lens (2)/ hood emblem/
hood emblem mount/ 2.6×8 BCS (5)/ 2.5×6 BCS (4)/ 1.6×5 BCS (self-tapping) (2)
(fits #9112 body)
8091| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Chevrolet Blazer (1969 & 1972) (includes mount, reverse lights and turn
signal harnesses, hardware)
8090| LED light set, complete with power supply (contains headlights,
tail lights, side marker lights, & distribution block) (fits #9111 or 9112
body)
9116| Marker light housing (4)/ marker light mount (4)/ marker light
lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6×5 BCS (self-
tapping) (8)
9121| Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips
(4) (fits #9112 body)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8090X| Pro Scale® LED light set, TRX-4® Chevrolet Blazer (1969 &
1972), complete with power module (contains headlights, tail lights, side
marker lights, & distribution block) (fits #9111 or 9112 body)
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
9122| Tail light housing, black (2)/ lens (2)/ retainers (left &
right)/ 2.6×8 BCS (self-tapping) (4)
|
Body (1972 Chevrolet® Blazer®)
9111| Body, Chevrolet Blazer (1972) (clear, requires painting)
(includes grille, side mirrors, side trim, door handles, windshield wipers,
decals, window masks)
9130| Body, Chevrolet Blazer (1972) (clear, requires painting)/
decals/ window masks (includes grille, side mirrors, door handles, windshield
wipers, clipless mounting, hardware) (requires #8072X inner fenders)
9130- BLWT| Body, Chevrolet Blazer (1972), complete, blue & white
(painted) (includes grille, side mirrors, door handles, windshield wipers,
front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9130-BLUE| Body, Chevrolet Blazer (1972), complete, blue (painted)
(includes grille, side mirrors, door handles, windshield wipers, front & rear
bumpers, clipless mounting) (requires #8072X inner fenders)
9111X| Body, Chevrolet Blazer (1972), complete, blue (painted)
(includes grille, side mirrors, door handles, windshield wipers, front &
rear
bumpers, decals)
9130- RED| Body, Chevrolet Blazer (1972), complete, red (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear
bumpers, clipless mounting) (requires #8072X inner fenders)
---|---
9125| Bumper pads/ bumper guards (chrome)/ 2.5×12 BCS (4)/ 2.7mm drill
bit (fits #9126 or #9127 front bumpers)
9126| Bumper, front (chrome)/ bumper mount/ lens (left and right) (2)/
lens mount (left and right) (2)/ 3×10 BCS (2)/ 2.6×6 BCS (4)
9124| Bumper, rear (chrome)/ bumper mount/ 3×10 BCS (2)
9113| Decal sheets, Chevrolet Blazer (1969 – 1972)
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
9115| Door handles, left, right, and rear/ retainers (3)/ windshield
wipers, left & right/ retainer (1)/ fuel cap/ fuel flange/ fuel cap mount/
1.6×5 BCS (self-tapping) (7)/ 2.6×8 BCS (1)
9120| Grille, Chevrolet Blazer (1972)/ grille retainers (5)/ headlight
housing (2)/ lens (2)/ 2.6×8 BCS (5)/ 2.5×6 BCS (4) (fits #9111 body)
8091| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Chevrolet Blazer (1969 & 1972) (includes mount, reverse lights and turn
signal harnesses, hardware)
8090| LED light set, complete with power supply (contains headlights,
tail lights, side marker lights, & distribution block) (fits #9111 or 9112
body)
9116| Marker light housing (4)/ marker light mount (4)/ marker light
lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6×5 BCS (self-
tapping) (8)
9118| Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips
(4) (fits #9111 body)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8090X| Pro Scale® LED light set, TRX-4® Chevrolet Blazer (1969 &
1972), complete with power module (contains headlights, tail lights, side
marker lights, & distribution block) (fits #9111 or 9112 body)
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
9117| Side trim, Chevrolet Blazer (1972), left & right/ rear trim,
upper & lower/ retainers, left, right & rear/ 2.6×8 BCS (23)/ 1.6×5 BCS (self-
tapping) (5) (fits #9111 body)
9119| Tail light housing, chrome (2)/ lens (2)/ retainers (left &
right)/ 2.6×8 BCS (self-tapping) (4)
|
Body (1979 Chevrolet® Blazer®)
8130T| Body, Chevrolet Blazer (1979), complete (black) (includes
grille, side mirrors, door handles, windshield wipers, front & rear bumpers,
decals)
8130X| Body, Chevrolet Blazer (1979), complete (orange) (includes
grille, side mirrors, door handles, windshield wipers, front & rear bumpers,
decals)
8130R| Body, Chevrolet Blazer (1979), complete (red) (includes grille,
side mirrors, door handles, windshield wipers, front & rear bumpers, decals)
8131| Decal sheet, Chevrolet Blazer (1979)
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
8132| Door handles, left, right & rear tailgate/ windshield wipers,
left & right/ retainers (2)/ 1.6×5 BCS (self-tapping) (7) (fits #8130 series
bodies)
8134| Grille, Chevrolet Blazer or K10 Truck (1979)/ grille retainers
(4)/ headlight housing (2)/ lens (2)/ 2.6×8 BCS (4)/ 2.5×6 BCS (2) (fits #8130
or 9212 series bodies)
8082| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Chevrolet Blazer or K10 Truck (1979) (includes mount, reverse lights
harness, hardware)
8039| LED light set (contains headlights, tail lights, side marker
lights, & distribution block) (fits #8130 series bodies, requires #8028 power
supply)
8038| LED light set, complete with power supply (contains headlights,
tail lights, side marker lights, & distribution block) (fits #8130 series
bodies)
8133X| Mirrors, side (folding) (fits #8130 series bodies)
8133| Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips
(4) (fits #8130 series bodies)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8038X| Pro Scale® LED light set, TRX-4® Chevrolet Blazer or K10 Truck
(1979), complete with power module (contains headlights, tail lights, side
marker lights, & distribution block) (fits #8130 or 9212 series bodies)
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
---|---
8135| Tail lights, left & right (assembled)/ tail light retainers,
left & right/ side marker lights (assembled) (2)/ side marker retainers (2)/
mounting tape (2)/ 1.6×5 BCS (self-tapping) (4)/ 2.6×8 BCS (2) (fits #8130 or
9212 series bodies)
| Body (1979 Ford® Bronco®)
8010X| Body, Ford Bronco, complete (black) (includes front and rear
bumpers, push bar, rear body mount, grille, side mirrors, door handles,
windshield wipers, spare tire mount, red and sunset decals) (requires #8072
inner fenders)
8078R| Decal sheet, Bronco, red (fits #8010 body)
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
8075| Door handles, left & right/ windshield wipers, left & right/
retainers (3)/ 1.6×5 BCS (self-tapping) (4) (fits #8010 or 9230 series
bodies)
8070| Grille, Ford Bronco or F-150/ grille retainers (6)/ headlight
housing (2)/ lens (2)/ 2.6×8 BCS (6)/ 2.5×6 BCS (2) (fits #8010 or 9230 series
bodies)
8032| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Ford Bronco (1979) or Chevrolet K10 Truck (1979) (includes mount,
reverse lights harness, hardware)
8036| LED light set (contains headlights, tail lights, side marker
lights, and distribution block) (fits #8010 body, requires #8028 power
supply)
8037| LED lights, high/low switch (for #8035 or #8036 LED light
kits)
8073| Mirrors, side, black (left & right)/ retainers (2)/ body clips
(4) (fits #8010 or 9230 series bodies)
8073X| Mirrors, side, chrome (left & right)/ retainers (2)/ body clips
(4) (fits #8010 or 9230 series bodies)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8035R| Pro Scale® LED light set, TRX-4® Ford Bronco (1979) or Ford F-
150 (1979), complete with power module (contains headlights, tail lights, side
marker lights, & distribution block) (fits #8010 or 9230 series bodies)
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
8076| Side trim, left & right (chrome)/ retainers/ LED lens/ 2.6×8
BCS
(24) (fits #8010 series bodies)
8074| Spare tire mount/ mounting bracket/ spare tire cover/ mounting
hardware
8077| Tailgate panel insert (clear, requires painting)/ adhesive foam
tape (2) (fits #8010 series bodies)
8071| Tailgate panel/ tail light lens (2) (left & right) (fits #8010
series bodies)
|
Body (Mercedes-Benz® G 500®)
8811| Body, Mercedes-Benz® G 500® (clear, requires painting)/ decals/
window masks (includes rear body post, grille, side mirrors, door handles,
windshield wipers)
8812| Decals, Mercedes-Benz® G 500®
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
8813X| Grille, Mercedes-Benz® G 500® 4×4²/grille mount & insert/lens,
headlight (2 ea)/reflector (2)/bumperette & mounts, front (2
ea)/turn signal housing & lens (2 ea)/ hardware (fits #8811/8825 body)
8893| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Mercedes® G 500® & G 63® (includes mount, rear bumper lens, turn
signal, reverse light, & fog light harnesses, hardware)
8899| LED light set (contains headlights, tail lights, roof lights,
and distribution block) (fits #8811 body, requires #8028 power supply)
8898| LED light set, complete with power supply (contains headlights,
tail lights, roof lights, & distribution block) (fits #8811 body)
8817| Mirrors, side, black (left & right)/ o-rings (4)/ windshield
wipers, left, right, & rear/ wiper retainers (2)/ body clips (4)/ 1.6×5 BCS
(self-tapping) (3)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8898X| Pro Scale® LED light set, TRX-4® Mercedes® G 500® & G 63®,
complete with power module (contains headlights, tail lights, roof lights, &
distribution block) (fits #8811 or 8825 body)
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
8822| Roof visor/ visor retainer/ visor lens (2)/ 2.6×6 BCS (3)/ 3×4
GS (4)
8816X| Side marker light housing (2)/ mount (2)/ lens (2)/ 1.6×7 BCS
(self-tapping) (2)
---|---
8814X| Tail light lens (2)/ tail light housing (2)/ tail light housing
mount (2)/ reverse lens (2)/ 1.6×5 BCS (4) (left & right)
|
Body (Tactica Unit)
8211X| Body, Tactical Unit, night camo (painted)/ decals
8019| Fender brace, inner, front & rear
8017| Fender flares, front & rear (2 each) (fits #8011 or #8211 series
bodies)
8018| Fenders, inner, front & rear (2 each)/ rock light covers (8)
8020| **Mirrors, side (left & right)/ snorkel/ mounting hardware (fits
8011 series bodies)**
8021| Spare tire mount/ mounting bracket/ screw pins (2)
|
Body (TRX-4® Sport)
8112| Body with camper, TRX-4® Sport (clear, trimmed, requires
painting)/window masks/ decal sheet
8213| Body, TRX-4® Sport (clear, trimmed, die-cut for clipless
mounting, requires painting)/ window masks/ decal sheet
8111R| Body, TRX-4® Sport (clear, trimmed, die-cut for LED light kit,
requires painting)/ window masks/ decal sheet
8111| Body, TRX-4® Sport (clear, trimmed, requires painting)/ window
masks/ decal sheet
8213-BLUE| Body, TRX-4® Sport, complete, blue (painted, decals applied)
(includes grille, side mirrors, door handles, windshield wipers, expedition
rack, & clipless mounting) (requires #8080X inner fenders)
8213-GRAY| Body, TRX-4® Sport, complete, gray (painted, decals applied)
(includes grille, side mirrors, door handles, windshield wipers, expedition
rack, & clipless mounting) (requires #8080X inner fenders)
8213-RED| Body, TRX-4® Sport, complete, red (painted, decals applied)
(includes grille, side mirrors, door handles, windshield wipers, expedition
rack, & clipless mounting) (requires #8080X inner fenders)
8113| Decal Sheet, TRX-4® Sport
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
8120R| Expedition rack, complete (includes traction boards, shovel, axe, jack,
fire extinguisher, fuel cans, & mounting hardware) (fits #8111, 8111R, or 8213
series bodies)
8120A| Expedition rack/ mounting hardware (fits #8111, 8111R, or 8213 series
bodies)
8422-BLK| Fire extinguisher, black (2)
8422| Fire extinguisher, red (2)
8116| Grille/ grille retainers (2)/ grille mount/ lens (2)/ 2.5×8 BCS (6)
(fits #8111 or #8112 body)
8212| Hood vents (left & right)/ retainers (left & right) (for clipless body
mounting) (attaches to #8213 series bodies)
8083| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal
harnesses, hardware)
8023| Jack (1)/ 2×8 BCS (1)
8023T| Jack (black) (1)/ 2×8 BCS (1)
9216| Latch, body mount (2)/ 3×8 BCS (8)
8086| **LED expedition rack scene light kit (fits #8111 body, requires
8028 power supply)**
8084| **LED headlight/tail light kit (fits #8111 or #8112 body, requires
8028 power supply)**
8088| **LED light bar, front bumper (fits #8866 front bumper, requires
8028 power supply)**
8087| LED light bar, roof lights (fits #8111 body, requires #8028
power supply)
8085| LED light set, complete with power supply (contains headlights,
tail lights, & distribution block) (fits #8111 or #8112 body)
8119| Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or
8112 body)
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8085X| **Pro Scale® LED light set, TRX-4® Sport, complete with power
module (contains headlights, tail lights, & distribution block) (fits #8111 or
8112 body)**
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
8122-BLK| Shovel/ axe (black)/ accessory mount/ mounting hardware
8122| Shovel/ axe/ accessory mount/ mounting hardware
8118| Spare tire mount/ mounting hardware
8117| Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens
(2) (left & right)/ 2.5×8 BCS (4) (fits #8111 or #8112 body)
8121X| Traction boards, blue/ mounting hardware
8121G| Traction boards, green/ mounting hardware
---|---
8121A| Traction boards, yellow/ mounting hardware
8121| Traction boards/ mounting hardware
|
Body Accessories
1926| Antenna caps, vinyl (2)/ antenna spool
1726| Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
1834| Body Clips (12) (standard size)
1834A| Body clips, black (12) (standard size)
3934| Body clips, heavy duty (12)
3934A| Body clips, heavy duty (black) (12)
8215| Body mounts & posts, front & rear (complete set)
8115| Body posts, front & rear
4915| Body washers, foam adhesive (10)
2514| Decal sheet, racing sponsors
8081| Fender extensions (4)/ 3×8 flathead screws (24) (requires #8080
narrow inner fenders)
8080| Fenders, inner (narrow), front & rear (2 each)/ rock light
covers (8)/ battery plate/ body mount/ 3×8 flat-head screws (4)/ 2.5×6 CS
(10)
8072| Fenders, inner, front & rear (2 each)/ rock light covers (8)/
battery plate/ 3×8 flathead screws (4)
9950| Official Team Traxxas® racing decal set(flag logo/ 6-color)
|
Bumpers & Skidplates
8234-GRN| Bumper D-rings, green (front or rear)/ 2.0×12 CS (4)
8234| Bumper D-Rings, grey (front or rear)/ 2.0×12 CS (4)
8234R| Bumper D-rings, red (front or rear)/ 2.0×12 CS (4)
8067X| Bumper mounts, front & rear/ bumper mount, rear (offset)
8237| Bumper mounts, front & rear/ screw pins (4)
8124| Bumper, front (178mm wide)/ winch/ 2.6×8 BCS (1)
8866| Bumper, front, winch, TRX-4® Sport (includes bumper mount, D- Rings,
fairlead, hardware) (fits TRX-4® Sport with 8855 winch)
(191mm wide)
8235| Bumper, front/ winch/ 2.6×8 BCS (1)
8236| Bumper, rear
8125| Bumper, rear (176mm wide)
8238| Skidplate/ lower gear cover
|
Chassis & Attachments
8215| Body mounts & posts, front & rear (complete set)
8115| Body posts, front & rear
8224| Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3×8 BCS
(5)/ 2.5×8 CS (2)
8058| Chassis conversion kit, TRX-4® (long to short wheelbase)
(includes rear upper & lower suspension links, front & rear inner fenders,
short female half shaft, battery tray, 3x8mm FCS (4))
8057| Chassis conversion kit, TRX-4® (short to long wheelbase)
(includes rear upper & lower suspension links, front & rear shock towers, long
female half shaft)
8220| Chassis rails, 448mm (steel) (left & right)
8218| Floor pans, left & right
8224X| **Receiver box cover (for use only with #8224 receiver box &
2260 BEC)/ foam pads/ seals/ silicone grease**
8219| Rock sliders, left & right
8225| Seal kit, receiver box (includes o-ring, seals, and silicone
grease)
8240X| Servo mount, 2-speed/ servo mount, T-Lock/ wire clips
8239| Servo mount, steering/ chassis crossmember
8216| Shock towers, front & rear (left & right)
8226| Tray, battery
|
Differential Components
8281| Carrier, differential/ differential slider/ T-Lock fork
8280A| Differential cover, front or rear (black)
8280X| Differential cover, front or rear (chrome plated)
8280-GRN| Differential cover, front or rear (green)
8280| Differential cover, front or rear (grey)
8280R| Differential cover, front or rear (red)
8195| Differential, locking, front and rear (assembled) (includes
T-Lock cables and servos)
8282| Gear set, differential (output gears (2), spider gears (4),
spider gear shaft (2))
8295| Output drive, transmission or differential (pin retainer (1)/ drive cup
(1)/ drive ball (1)/ drive pin (1)/ 3×10 screw pin (1)/ cross pin (black)
(1) 3×6 BCS with threadlock (1))
8279| Ring gear, differential/ pinion gear, differential
8279R| Ring gear, differential/ pinion gear, differential (machined)
8287| Ring gear, differential/ pinion gear, differential (overdrive,
machined)
8288| Ring gear, differential/ pinion gear, differential (underdrive,
machined)
8297| Spool/ differential housing plug/ e-clip/ 2.5x8mm BCS (with threadlock)
(4)
|
Driveline Components
---|---
8250| Half shafts, center (internal splined, front (2) & internal splined,
rear (2)/ external splined (2)/ pin retainer (4)) (plastic parts only)
8255| Stub axle (portal drive) (2)
8255A| Stub axle, extended thread (portal drive) (2)
8269| Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)
8269X| Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/
3×10 screw pin (4)
8269A| Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-
anodized) (4)/ 3×10 screw pin (4)
8269G| Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/
3×10 screw pin (4)
8269R| Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3×10
screw pin (4)
| Hardware
1552| 3x8mm Hex Cap Screws (6)/ Washers (6)/ Wrench (1)
1834| Body Clips (12) (standard size)
1834A| Body clips, black (12) (standard size)
3934| Body clips, heavy duty (12)
3934A| Body clips, heavy duty (black) (12)
4859| CS 3×10 flathead (hex drive)
8167X| Hardware kit, stainless steel, beadlock rings (contains
stainless steel hardware for 4 wheels)
8298| Hardware kit, stainless steel, TRX-4® (contains all stainless
steel hardware used on TRX-4®)
8151| Hardware kit, stainless steel, TRX-4® High Lift Kit (contains
all stainless steel hardware used on TRX-4® High Lift Kit)
5476X| Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball
1747P| Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)
3647| Nuts, 4mm flanged nylon locking (steel, serrated) (8)
8347| Nuts, 4mm flanged nylon locking, serrated (black) (10)
1747R| Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)
1747G| Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
1747T| Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)
1985| PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
8221| Screw pin, 3x10mm (6)
2523| Screws, 2.5×10 countersunk machine (hex drive) (6)
3229| Screws, 2.5x10mm cap-head machine (hex drive) (6)
3236| Screws, 2.5x12mm cap-head machine (6)
2618| Screws, 2.5x16mm cap-head machine (6)
3215| Screws, 2.5x6mm cap-head machine (hex drive) (6)
2524| Screws, 2.5×8 countersunk machine (hex drive) (6)
2617| Screws, 2.5x8mm button-head machine (hex drive) (6)
3965| Screws, 2.5x8mm cap-head machine (6)
8299| Screws, 2.6x12mm button-head, self-tapping (hex drive) (6)
8167| Screws, 2x10mm cap-head, self-tapping (hex drive) (10)
2564| Screws, 2x8mm cap-head machine (hex drive) (6)
2577| Screws, 3x10mm button-head machine (hex drive) (6)
2578| Screws, 3x12mm button-head machine (hex drive) (6)
2579| Screws, 3x15mm button-head machine (hex drive) (6)
2591| Screws, 3x23mm button-head machine (hex drive) (6)
2581| Screws, 3x25mm button-head machine (hex drive) (6)
2616| Screws, 3x27mm button-head machine (hex drive) (6)
2582| Screws, 3x30mm button-head machine (hex drive) (6)
2575| Screws, 3x6mm button-head machine (hex drive) (6)
3932| Screws, 3x6mm flat-head machine (hex drive) (6)
2576| Screws, 3x8mm button-head machine (hex drive) (6)
3931| Screws, 3x8mm flat-head machine (hex drive) (6)
3933| Screws, 4x16mm button-head machine (hex drive) (6)
|
LED Light Accessories
8031| 3-in-1 wire harness, LED light kit
8089| 4-in-2 wire harness, LED light kit
6593| Distribution block, Pro Scale® Advanced Lighting Control
System
8083| Installation kit, Pro Scale® Advanced Lighting Control System,
TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal
harnesses, hardware)
8086| **LED expedition rack scene light kit (fits #8111 body, requires
8028 power supply)**
8084| **LED headlight/tail light kit (fits #8111 or #8112 body, requires
8028 power supply)**
8088| **LED light bar, front bumper (fits #8866 front bumper, requires
8028 power supply)**
8087| LED light bar, roof lights (fits #8111 body, requires #8028
power supply)
8085| LED light set, complete with power supply (contains headlights,
tail lights, & distribution block) (fits #8111 or #8112 body)
8028| LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire
harness
8026X| LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power
supply
and #8018, #8072, or #8080 inner fenders)
---|---
6592| Power module, Pro Scale® Advanced Lighting Control System
(includes mount, communication cables, hardware)
6591| Pro Scale® Advanced Lighting Control System (includes power
module & distribution block)
8085X| **Pro Scale® LED light set, TRX-4® Sport, complete with power
module (contains headlights, tail lights, & distribution block) (fits #8111 or
8112 body)**
6594| Receiver communication cable, Pro Scale® Advanced Lighting
Control System
| Long Arm Lift Kit
8162X| **Body, GTS shock, long (aluminum, blue-anodized) (1) (for use
8140X TRX-4® Long Arm Lift Kit)**
8162R| Body, GTS shock, long (aluminum, red-anodized) (1) (for use
with #8140R TRX-4® Long Arm Lift Kit)
8162| Body, GTS shock, long (silver aluminum) (1) (for use with #8140 TRX-4®
Long Arm Lift Kit)
8147| Cable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)
8148| Cable, T-lock, extra long (193mm) (for use with TRX-4® Long Arm
Lift Kit)
9283| Cable, T-lock, rear (185mm)
8150| Driveshaft extension kit, center (includes internal splined,
x-long (2), internal splined, long (1) and internal splined, medium (1)) (for
use with TRX-4® Long Arm Lift Kit)
8140| Long arm lift kit, TRX-4®, complete
8140X| Long arm lift kit, TRX-4®, complete (includes blue powder
coated links, blue-anodized shocks)
8140R| Long arm lift kit, TRX-4®, complete (includes red powder coated
links, red-anodized shocks)
8149| Rod ends, extended (standard (4), angled (4))/ hollow balls (8)
(for use with TRX-4® Long Arm Lift Kit)
8141| Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)
8161| Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4®
Long Arm Lift Kit)
8160X| Shocks, GTS, aluminum (blue-anodized) (assembled without
springs) (4) (for use with #8140X TRX-4® Long Arm Lift Kit)
8160R| Shocks, GTS, aluminum (red-anodized) (assembled without
springs) (4) (for use with #8140R TRX-4® Long Arm Lift Kit)
8160| Shocks, GTS, silver aluminum (assembled without springs) (4) (for use
with #8140 TRX-4® Long Arm Lift Kit)
8153| Springs, shock, long (natural finish) (GTS) (0.29 rate, white
stripe) (for use with TRX-4® Long Arm Lift Kit)
8154| Springs, shock, long (natural finish) (GTS) (0.39 rate, orange
stripe) (for use with TRX-4® Long Arm Lift Kit)
8155| Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with
TRX-4® Long Arm Lift Kit)
8156| Springs, shock, long (natural finish) (GTS) (0.54 rate, green
stripe) (for use with TRX-4® Long Arm Lift Kit)
8157| Springs, shock, long (natural finish) (GTS) (0.62 rate, blue
stripe) (for use with TRX-4® Long Arm Lift Kit)
8146X| Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard
link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use
with #8140X TRX-4® Long Arm Lift Kit)
8146R| Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard
link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use
with #8140R TRX-4® Long Arm Lift Kit)
8144X| Suspension link, front upper, 5x68mm (1) (blue powder coated
steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift
Kit)
8144R| Suspension link, front upper, 5x68mm (1) (red powder coated
steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift
Kit)
8144| Suspension link, front upper, 5x68mm (1) (steel) (assembled with hollow
balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8143| Suspension links, front lower (2) (5x104mm, steel) (assembled with
hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8143X| Suspension links, front lower, blue (2) (5x104mm, powder coated
steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift
Kit)
8143R| Suspension links, front lower, red (2) (5x104mm, powder coated
steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift
Kit)
8145| Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow
balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8145X| Suspension links, rear lower, blue (2) (5x115mm, powder coated
steel) (assembled with hollow balls) (for use with #8140X TRX-4®
Long Arm Lift Kit)
8145R| Suspension links, rear lower, red (2) (5x115mm, powder coated
steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
8142| Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow
balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8142X| Suspension links, rear upper, blue (2) (5x115mm, powder coated
steel) (assembled with hollow balls) (for use with #8140X TRX-4®
Long Arm Lift Kit)
---|---
8142R| Suspension links, rear upper, red (2) (5x115mm, powder coated
steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift
Kit)
8172| Tires & wheels, assembled (Method Race Wheels® 105 Beadlock 2.2″
black chrome beadlock wheels, Canyon Trail 5.3×2.2″ tires, foam inserts) (1
left, 1 right)
8184| Tires & wheels, assembled, glued (2.2″ classic chrome wheels,
Canyon Trail 5.3×2.2″ tires, foam inserts) (2)/ center caps (front (2), rear
(2)) (requires #8255A extended thread stub axle)
8181| Tires & wheels, assembled, glued (TRX-4® Sport 2.2″ wheels, Canyon Trail
5.3×2.2″ tires) (2)
8170| Tires, Canyon Trail 5.3×2.2″/ foam inserts (2)
8171| Wheels, 2.2″, Method Race Wheels® 105 Beadlock (black chrome,
beadlock) (beadlock rings sold separately)
8171A| Wheels, 2.2″, Method Race Wheels® 105 Beadlock (charcoal gray,
beadlock) (beadlock rings sold separately)
8180| Wheels, TRX-4® Sport 2.2 (2)
| Motors & Electronics
1926| Antenna caps, vinyl (2)/ antenna spool
1726| Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
2262| BEC, complete (12.6 volts (3s LiPo) maximum input voltage)
(includes receiver box cover and seals)
2064A| Gear set (for 2065A waterproof sub-micro servo)
2064R| Gear set, metal (for 2065R waterproof sub-micro servo)
2072X| Gear set, metal (for 2070, 2075 servos)
2252| Gear set, metal (for 2250, 2255 servos)
2072R| Gear set, metal, high-speed (for 2070, 2075 servos)
8290X| Motor mount plate, 6061-T6 aluminum (blue-anodized)
8290A| Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)
8290G| Motor mount plate, 6061-T6 aluminum (green-anodized)
8290R| Motor mount plate, 6061-T6 aluminum (red-anodized)
3975R| Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)
8290| Plate, motor/ upper spur gear cover
2254| Servo case, aluminum (middle) (blue-anodized) (for 2250 servo)
2253| Servo case, aluminum (middle) (red-anodized) (for 2255 servo)
2251| Servo case, plastic (top, middle, bottom)/ gaskets/ hardware
(for 2250, 2255 servos)
2271| Servo case/ gaskets (for 2270 waterproof servo)
2063A| Servo case/gaskets (for 2065A waterproof sub-micro servo)
2063R| Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro
servo)
2063X| Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro
servo)
5669| Servo horn (with built-in spring and hardware) (for Summit
locking differential)
2075R| Servo, digital high-speed, metal gear (ball bearing),
waterproof
2250| Servo, digital high-torque 330 coreless, metal gear (ball
bearing), waterproof (#2262 external BEC and #8247X metal servo horn
recommended for optimal performance)
2255| Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof (#2262 external BEC and #8247 steel servo horn
recommended for optimal performance)
2270| Servo, digital high-torque, metal gear (ball bearing),
waterproof
2075X| Servo, digital high-torque, metal gear (ball bearing), waterproof
2065A| Servo, sub-micro, waterproof
2065R| Servo, sub-micro, waterproof, metal gear
3025| XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection,
fwd/rev/brake)
2261| Y-harness, BEC
| Pro Scale® Winch & Accessories
8867| Bumper, front, winch, medium (includes bumper mount, D- Rings,
fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch)
(217mm wide)
8859| Fairlead, winch
8870X| Fairlead, winch, aluminum (blue-anodized) (use with front
bumpers #8865, 8866, 8867, 8869, or 9224)
8870A| Fairlead, winch, aluminum (gray-anodized) (use with front
bumpers #8865, 8866, 8867, 8869, or 9224)
8870G| Fairlead, winch, aluminum (green-anodized) (use with front
bumpers #8865, 8866, 8867, 8869, or 9224)
8870T| Fairlead, winch, aluminum (orange-anodized) (use with front
bumpers #8865, 8866, 8867, 8869, or 9224)
8870R| Fairlead, winch, aluminum (red-anodized) (use with front
bumpers #8865, 8866, 8867, 8869, or 9224)
8862| Gearmotor, winch
8863| Hook, winch (steel)/ line retainer/ washer
8858| Housings (front & rear), winch/ decal
8864X| Line, winch (blue)
8864| Line, winch (gray)
8860| Spool shaft assembly, winch
---|---
8861| Spool, winch
8855| Winch kit with wireless controller, TRX-4® and TRX-6®
8856| Winch, TRX-4® and TRX-6® (requires #8857 wireless remote)
8857| Wireless remote, winch, TRX-4® and TRX-6®
| Radio System, Batteries & Chargers
2823X| 1400mah 11.1v 3-Cell 25C LiPo Battery
2820X| 2200mah 7.4v 2-Cell 25C LiPo Battery
2849X| 4000mah 11.1v 3-Cell 25C LiPo Battery
2872X| 5000mah 11.1v 3-Cell 25C LiPo Battery
2842X| 5000mah 7.4v 2-Cell 25C LiPo Battery
2843X| 5800mah 7.4v 2-Cell 25C LiPo Battery
2869X| 7600mah 7.4v 2-Cell 25C LiPo Battery
2914| Battery, Power Cell AA Alkaline (4)
2976| AC to DC adapter
2938X| Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD®
batteries to separate balance ports)
1726| Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)
2943| Battery charge indicators, green (4), grey (4), blue (4)
6548| Battery door, TQ 2.4 transmitter (replacement for #6516, 6517
transmitter)
8222| Battery strap (for use with 2200mAh 2-cell and 1400mAh 3-cell
LiPo batteries)
2923X| Battery, Power Cell, 3000mAh (NiMH, 7-C flat, 8.4V)
2940X| Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V)
2950X| Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V)
2960X| Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V)
2983| Battery/charger completer pack (includes #2969 2-amp NiMH peak
detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH iD® battery (1))
2992| **Battery/charger completer pack (includes #2970 iD® charger (1),
2843X 5800mAh 7.4V 2-cell 25C LiPo iD® battery (1))**
2994| **Battery/charger completer pack (includes #2970 iD® charger (1),
2849X 4000mAh 11.1v 3-Cell 25C LiPo iD® battery (1))**
2991| Battery/charger completer pack (includes #2972 Dual iD charger
(1), #2869X 7600mAh 7.4V 2-cell 25C LiPo iD® Battery (2))
2262| BEC, complete (12.6 volts (3s LiPo) maximum input voltage)
(includes receiver box cover and seals)
2975| Charger, D/C, 4 amp (6 – 7 cell, 7.2 – 8.4 volt, NiMH)
2972| Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery
Identification
2973| Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery
Identification
2970| Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery
Identification
2971| Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery
Identification
2981| Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto
Battery Identification
6525| The communication link, telemetry expander
6512| Cover plate, Traxxas® Link Bluetooth® module
2978| Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977)
2064A| Gear set (for 2065A waterproof sub-micro servo)
2064R| Gear set, metal (for 2065R waterproof sub-micro servo)
2072X| Gear set, metal (for 2070, 2075 servos)
2252| Gear set, metal (for 2250, 2255 servos)
2272| Gear set, metal (for 2270 waterproof servo)
2072R| Gear set, metal, high-speed (for 2070, 2075 servos)
2968X| LiPo cell voltage checker/balancer (includes #2938X adapter for
Traxxas® iD® batteries)
2968| LiPo cell voltage checker/balancer (requires #2938X adapter for
Traxxas® iD® batteries)
6561| Mount, telemetry expander
6535| Mount, temperature sensor (electric motors)/ wire tie/ thermal
pad
6519| Receiver, micro, TQ 2.4GHz (3-channel)
6533| Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)
6552| Seal kit, expander box (includes o-ring, seals, and silicone
grease)
6526| Sensor, auto-detectable, temperature
6527| Sensor, auto-detectable, voltage
6521| Sensor, temperature and voltage (long)
2254| Servo case, aluminum (middle) (blue-anodized) (for 2250 servo)
2253| Servo case, aluminum (middle) (red-anodized) (for 2255 servo)
2251| Servo case, plastic (top, middle, bottom)/ gaskets/ hardware
(for 2250, 2255 servos)
2271| Servo case/ gaskets (for 2270 waterproof servo)
2063A| Servo case/gaskets (for 2065A waterproof sub-micro servo)
2063R| Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro
servo)
2063X| Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro
servo)
2075R| Servo, digital high-speed, metal gear (ball bearing),
waterproof
---|---
2250| Servo, digital high-torque 330 coreless, metal gear (ball
bearing), waterproof (#2262 external BEC and #8247X metal servo horn
recommended for optimal performance)
2255| Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof (#2262 external BEC and #8247 steel servo horn
recommended for optimal performance)
2270| Servo, digital high-torque, metal gear (ball bearing),
waterproof
2075X| Servo, digital high-torque, metal gear (ball bearing), waterproof
2065A| Servo, sub-micro, waterproof
2065R| Servo, sub-micro, waterproof, metal gear
6553X| Telemetry Expander 2.0 and GPS module 2.0, TQi radio system
6550X| **Telemetry expander 2.0, TQi radio system (for use only with
6551X GPS module)**
6551X| **Telemetry GPS module 2.0, TQi radio system (for use only with
6550X telemetry expander)**
6509R| TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link
enabled, TSM® (2-ch transmitter, 5-ch micro receiver)
6507R| TQi 2.4 GHz High Output radio system, 4-channel with Traxxas®
Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro
receiver)
6516| Transmitter, TQ 2.4GHz, 2-channel (transmitter only)
6530| Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-
channel (transmitter only)
6511| Traxxas® Link Bluetooth® module
2261| Y-harness, BEC
| Ready-To-Race Model
82044-4| TRX-4 Sport High Trail Edition: 4WD Electric Truck with TQ™ 2.4GHz
Radio System
| Scale Details
8120R| Expedition rack, complete (includes traction boards, shovel, axe, jack,
fire extinguisher, fuel cans, & mounting hardware) (fits #8111, 8111R, or 8213 series bodies)
8120A| Expedition rack/ mounting hardware (fits #8111, 8111R, or 8213 series
bodies)
8422-BLK| Fire extinguisher, black (2)
8422| Fire extinguisher, red (2)
8022T| Fuel canisters (black) (2)/ screw pin
8022R| Fuel canisters (blue) (2)/ screw pin
8022-GRN| Fuel canisters (green) (2)/ screw pin
8022| Fuel canisters (red) (2)/ screw pin
8022X| Fuel canisters (white) (2)/ screw pin
8022A| Fuel canisters (yellow) (2)/ screw pin
8023| Jack (1)/ 2×8 BCS (1)
8023T| Jack (black) (1)/ 2×8 BCS (1)
8122-BLK| Shovel/ axe (black)/ accessory mount/ mounting hardware
8122| Shovel/ axe/ accessory mount/ mounting hardware
8121X| Traction boards, blue/ mounting hardware
8121G| Traction boards, green/ mounting hardware
8121A| Traction boards, yellow/ mounting hardware
8121| Traction boards/ mounting hardware
| Shock Oil
5031| Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032| Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033| Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
5034| Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035| Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036| Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037| Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5029| Shock oil bottle (60cc) (for mixing shock oil)
5038X| Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70
wt, & 80 wt premium shock oils with spinning carousel rack)
5038| Spinning carousel rack
| Shocks (GTS)
8266A| Body, GTS shock (aluminum, blue-anodized) (1)
8266G| Body, GTS shock (aluminum, green-anodized) (1)
8266R| Body, GTS shock (aluminum, red-anodized) (1)
8266| Body, GTS shock (aluminum, silver-anodized) (1)
8266X| Body, GTS shock (hard-anodized, PTFE-coated aluminum) (1)
8264| Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/
bottom cap (2)/ upper retainer (2)/ lower retainer (2))
8274| Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
5475| Multi-tool (plastic)
8261| Piston, damper (red) (4)/ e-clips (8)
8262| Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings,
e clips, rod ends, and travel limiters)
8263| Shock shaft, 3x47mm (GTS) (2)
8263T| Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2)
8260X| Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN
shafts (assembled with spring retainers) (2)
8260A| Shocks, GTS, blue-anodized (assembled with spring retainers)
(2)
---|---
8260G| Shocks, GTS, green-anodized (assembled with spring retainers)
(2)
8260R| Shocks, GTS, red-anodized (assembled with spring retainers)
(2)
8260| Shocks, GTS, silver aluminum (assembled with spring retainers)
(2)
| Slipper Clutch Components
8292| Input shaft/ output shaft (transmission)
8286| Output shafts (transfer case), front & rear
8254| Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm
NL (1)/ spring washers (2))
8249| Slipper eliminator plate
|
Springs
8041| Springs, shock (GTS) (front) (0.45 rate) (2)
8040| Springs, shock (GTS) (rear) (0.54 rate) (2)
8042| Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe)
(2)
8043| Springs, shock (natural finish) (GTS) (0.30 rate, white stripe)
(2)
8044| Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe)
(2)
8045| Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe)
(2)
| Spur Gears & Pinion Gears
6746| Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
6747| Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
3942X| Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3943X| Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3944X| Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3945X| Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3917| Gear, 15-T pinion (32-pitch) (fits 3mm shaft)/ set screw
3946X| Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3947X| Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3948X| Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3949X| Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3950X| Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3951X| Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
3952X| Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)
(fits 3mm shaft)/ set screw
6745| Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
8052| Spur gear, 39-tooth (32-pitch)
8053| Spur gear, 45-tooth (32-pitch)
| Steering Components
8232| Caster blocks (portal drive), left & right
8232X| Caster blocks, 6061-T6 aluminum (blue-anodized), left and
right
8232A| Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left
and right
8232G| Caster blocks, 6061-T6 aluminum (green-anodized), left and
right
8232R| Caster blocks, 6061-T6 aluminum (red-anodized), left and
right
2072X| Gear set, metal (for 2070, 2075 servos)
2072R| Gear set, metal, high-speed (for 2070, 2075 servos)
8274| Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
5355| Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer
adjustment shims; 3.5mm (2), 1.17mm (2)
8275| Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
8276| Rod ends (10)
8277| Rod ends, angled 10-degrees (8)
2742| Rod ends, long (6)/ hollow ball connectors (6)
8278| Rod ends, offset (4)
8247X| Servo horn, steering, metal/ 3×14 BCS (1)
2075R| Servo, digital high-speed, metal gear (ball bearing),
waterproof
2250| Servo, digital high-torque 330 coreless, metal gear (ball
bearing), waterproof
2255| Servo, digital high-torque 400 brushless, metal gear (ball
bearing), waterproof
2075X| Servo, digital high-torque, metal gear (ball bearing), waterproof
5529| Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls,
captured (4)
8246| Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)
8243| Suspension link, front, 5x100mm (lower) (steel) (2)
8244| Suspension link, front, 5x63mm (upper) (steel) (2)
8245| Suspension link, rear, 5x121mm (upper or lower) (steel) (2)
| Suspension Linkage
---|---
8058| Chassis conversion kit, TRX-4® (long to short wheelbase)
(includes rear upper & lower suspension links, front & rear inner fenders, short female half shaft, battery tray, 3x8mm FCS (4))
8057| Chassis conversion kit, TRX-4® (short to long wheelbase)
(includes rear upper & lower suspension links, front & rear shock towers, long
female half shaft)
8274| Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
5355| Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer
adjustment shims; 3.5mm (2), 1.17mm (2)
8275| Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
8276| Rod ends (10)
8277| Rod ends, angled 10-degrees (8)
2742| Rod ends, long (6)/ hollow ball connectors (6)
8278| Rod ends, offset (4)
5529| Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls,
captured (4)
8243| Suspension link, front, 5x100mm (lower) (steel) (2)
8244| Suspension link, front, 5x63mm (upper) (steel) (2)
8248| Suspension link, rear, 5x109mm (upper or lower) (steel) (2)
8245| Suspension link, rear, 5x121mm (upper or lower) (steel) (2)
| Team Traxxas Items
2514| Decal sheet, racing sponsors
9950| Official Team Traxxas® racing decal set(flag logo/ 6-color)
9909| Traxxas® racing banner, red & black (3×7 feet)
| Tires & Wheels
8169T| Beadlock rings, black (1.9″) (aluminum) (4)/ 2×10 CS (48)
8168T| Beadlock rings, black (2.2″) (aluminum) (4)/ 2×10 CS (48)
8169X| Beadlock rings, blue (1.9″) (aluminum) (4)/ 2×10 CS (48)
8168X| Beadlock rings, blue (2.2″) (aluminum) (4)/ 2×10 CS (48)
8169G| Beadlock rings, green (1.9″) (aluminum) (4)/ 2×10 CS (48)
8168G| Beadlock rings, green (2.2″) (aluminum) (4)/ 2×10 CS (48)
8169R| Beadlock rings, red (1.9″) (aluminum) (4)/ 2×10 CS (48)
8168R| Beadlock rings, red (2.2″) (aluminum) (4)/ 2×10 CS (48)
8169| Beadlock rings, satin (1.9″) (aluminum) (4)/ 2×10 CS (48)
8168| Beadlock rings, satin (2.2″) (aluminum)(4)/ 2×10 CS (48)
8176| Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A
extended thread stub axle)
8164X| **Center caps, wheel (chrome) (front (2), rear (2)) (requires
8255A extended stub axle)**
8174| Tires & wheels, assembled (Method Race Wheels® 105 Beadlock 1.9″
black chrome beadlock wheels, Canyon Trail 4.6×1.9″ tires, foam inserts) (1
left, 1 right)
8182| Tires & wheels, assembled (Method Race Wheels® 105 Beadlock 1.9″
satin black chrome, blue beadlock style wheels, Canyon Trail 4.6×1.9″ tires,
foam inserts) (1 left, 1 right)
8177| Tires & wheels, assembled, glued (1.9″ chrome wheels, Canyon
Trail 4.6×1.9″ tires) (2)/ center caps (2)/ decal sheet (requires #8255A
extended thread stub axle)
8184| Tires & wheels, assembled, glued (2.2″ classic chrome wheels,
Canyon Trail 5.3×2.2″ tires, foam inserts) (2)/ center caps (front (2), rear
(2)) (requires #8255A extended thread stub axle)
8273| Tires & wheels, assembled, glued (Tactical 1.9″ wheels, Canyon
Trail 4.6×1.9″ tires) (2)
8272X| Tires & wheels, assembled, glued (TRX-4® 1.9″ satin beadlock
wheels, Canyon Trail 4.6×1.9″ tires) (2)
8272| Tires & wheels, assembled, glued (TRX-4® 1.9″ wheels, Canyon
Trail 4.6×1.9″ tires) (2)
8179| Tires & wheels, assembled, glued (TRX-4® Sport 1.9″ wheels,
Canyon Trail 4.6×1.9″ tires) (2)
8181-BLUE| Tires & wheels, assembled, glued (TRX-4® Sport 2.2″ gray, blue
beadlock style wheels, Canyon Trail 5.3×2.2″ tires) (2)
8181-GRN| Tires & wheels, assembled, glued (TRX-4® Sport 2.2″ gray, green
beadlock style wheels, Canyon Trail 5.3×2.2″ tires) (2)
8181-RED| Tires & wheels, assembled, glued (TRX-4® Sport 2.2″ gray, red
beadlock style wheels, Canyon Trail 5.3×2.2″ tires) (2)
8172| Tires and wheels, assembled (Method 105 2.2™ black chrome
beadlock wheels, Canyon Trail 5.3×2.2™ tires, foam inserts) (1 left, 1 right)
(for use with TRX-4 Long Arm Lift Kit)
8181| Tires and wheels, assembled, glued (TRX-4® Sport 2.2™ wheels,
Canyon Trail 5.3×2.2™ tires) (2) (for use with TRX-4 Long Arm Lift Kit)
8270| Tires, Canyon Trail 4.6×1.9″ (S1 compound)/ foam inserts (2)
8170| Tires, Canyon Trail 5.3×2.2™/ foam inserts (2) (for use with TRX-4 Long-
Arm Lift Kit)
8269| Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)
8269X| Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/
3×10 screw pin (4)
8269A| Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray-
anodized) (4)/ 3×10 screw pin (4)
8269G| Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/
3×10 screw pin (4)
---|---
8269R| Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3×10
screw pin (4)
8175| **Wheels, 1.9″, chrome (2)/ center caps (2)/ decal sheet (requires
8255A extended thread stub axle)**
8173| Wheels, 1.9″, Method Race Wheels® 105 Beadlock (black chrome,
beadlock) (beadlock rings sold separately)
8173A| Wheels, 1.9″, Method Race Wheels® 105 Beadlock (charcoal gray,
beadlock) (beadlock rings sold separately)
8171| Wheels, Method 105 2.2″ (black chrome, beadlock) (beadlock rings
sold separately) (for use with TRX-4 Long Arm Lift Kit)
8171A| Wheels, Method 105 2.2″ (charcoal gray, beadlock) (beadlock
rings sold separately) (for use with TRX-4 Long Arm Lift Kit)
8180| Wheels, TRX-4 Sport 2.2 (2) (for use with TRX-4 Long Arm Lift
Kit)
8271| Wheels, TRX-4® 1.9 (2)
8271X| Wheels, TRX-4® 1.9 (satin beadlock) (2)
8178| Wheels, TRX-4® Sport 1.9 (2)
8180-BLUE| Wheels, TRX-4® Sport 2.2 (gray, blue beadlock style) (2)
8180-GRN| Wheels, TRX-4® Sport 2.2 (gray, green beadlock style) (2)
8180-RED| Wheels, TRX-4® Sport 2.2 (gray, red beadlock style) (2)
8268| Wheels, TRX-4® Tactical 1.9 (2)
| Transmission Components
8283| Cable, T-lock (front)
8284| Cable, T-lock (rear)
8289| Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage
8293X| Gear set, transmission, metal (includes 18T, 30T input gears,
36T output gear, 2×9.8 pins (5))
8291| Gearbox housing (includes main housing, front housing, & cover)
8285| Gears, transfer case (3)
5041| Grease, premium high performance (20cc)
8292| Input shaft/ output shaft (transmission)
8290X| Motor mount plate, 6061-T6 aluminum (blue-anodized)
8290A| Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)
8290G| Motor mount plate, 6061-T6 aluminum (green-anodized)
8290R| Motor mount plate, 6061-T6 aluminum (red-anodized)
8295| Output drive, transmission or differential (pin retainer (1)/ drive cup
(1)/ drive ball (1)/ drive pin (1)/ 3×10 screw pin (1)/ cross pin (black)
(1) 3×6 BCS with threadlock (1))
8294| Output gear, high range, 24T (metal)
8286| Output shafts (transfer case), front & rear
8290| Plate, motor/ upper spur gear cover
8249| Slipper eliminator plate
8296| Transmission gears, single speed, metal
8196| Two speed conversion kit
| Traxxas Tools
3433X| Body reamer (aluminum handle)
3433| Body reamer (plastic handle)
3436| Cap, body reamer
3432| Scissors, curved tip
3431| Scissors, straight tip
8712| Speed Bit Essentials Set, hex and nut driver, 7-piece, includes
premium handle (medium), travel pouch, hex drivers (straight:
1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
8720| Speed bit handle, large (overmolded)
8721| Speed bit handle, medium (one piece)
8722| Speed bit handle, premium (rubber overmold)
8710| Speed Bit Master Set, hex and nut driver, 13-piece, includes
premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm,
2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm,
5.0mm, 5.5mm, 7.0mm,
8.0mm), 1/4” drive
8711| Speed Bit Master Set, hex driver, 7-piece straight and ball end,
includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm,
2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive
8719| Speed Bit Master Set, nut driver, 6-piece, includes premium
handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm,
7.0mm, 8.0mm), 1/4″ drive
8716| Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″
drive
8716X| Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm,
3.0mm) 1/4″ drive
8715| Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm,
2.5mm), 1/4″ drive
8715X| Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm,
2.5mm, 3.0mm), 1/4″ drive
8714| Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1
Phillips, and #2 Phillips bits), 1/4″ drive
2748R| Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm
hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint
wrench)
---|---
3415| Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm,
4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm
slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/
4mm and 8mm wrenches/ driver handle)
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents
only)For orders, calls outside the U.S., and other information, call
972-549-3000,
or fax to 972-549-3011 e-mail Traxxas
at support@Traxxas.com