HAVIT Freego1 Air Conduction Wireless Headphones Instructions
- June 12, 2024
- havit
Table of Contents
Freego 1 Product specification
Product host and accessories
1 headset, 1 charging cable (Type-C head)
Product structure description (graphic) :
Add a sentence after the picture:
Note: The pictures in this manual are schematic drawings, there may be
deviation from the actual, please refer to the actual
Basic function
Boot, Bluetooth pairing
(Please make sure your phone supports Bluetooth)
Step 1
Long press the multi-function button of the headset for 3 seconds, the LED
blue light will be on for 1 second, and then the red and blue light will
alternately flash, and the headset will be turned on and automatically enter
the Bluetooth pairing state
Step 2:
Select “Freego 1” from the Bluetooth list of the phone for pairing. After
the pairing is successful, the blue light will flash once for 5s
Matters needing attention
a) Pairing mode lasts for 3 minutes, if you do not pair during this period,
the headset will automatically shut down, if you need to reconnect, follow the
above steps to boot pairing
b) After the headset is turned on, it will automatically connect back to
the last connected mobile phone (Bluetooth is turned on) before it is turned
off, and the mobile phone does not need to search for the connection again
c) After the headset is turned on, it will automatically connect to the
last connected mobile phone (Bluetooth is on) before it is turned off. The
effective time is 10 seconds. If no connected device can be found within 10
seconds, the headset will enter Bluetooth pairing mode and flash red and blue
alternately
Power Off
Press and hold the multifunction button of the headset for 5 seconds. The
red light will keep on for 2 seconds and then turn off
Answer the phone
Press the multi-function key
End the call
Press the multi-function key
Reject a call
Hold down the multifunction button for 2 seconds
Voice assistant
Press 3 multifunction keys (e.g. siri, Xiao Ai)
Music playback
Play/Pause: Press the multi-function key to pause, and then press to play
Previous: Long press the volume plus button for 2 seconds
Next: Press and hold the volume down button for 2 seconds
Volume adjustment
Volume Plus: Press the volume plus button
Volume down: Press the volume down key
Charging
1. When the headphone battery is low, the LED blue light automatically
turns red (the red light flashes once in 5S), and is accompanied by a low
electric sound prompt
2. 2, headset charging, LED red light long light, full charge, turn blue light long light,
Resetting
When the headset is on (any), long press the plus/minus key for 4 seconds,
no matter whether the hand is released to enter the pairing state or not, the
LED light will blink for 3 times to reset successfully and turn to red and
blue lights alternately (the headset will not be turned off after reset).
Successfully paired LED light displays the status
1. When the headset battery is sufficient:
After the phone is successfully connected to Bluetooth, the default
indicator is: the blue light flashes once for 5 seconds.
Specification:
Headphone size: 14210047.5mm
Input specifications: 5V 1A
Bluetooth normal range: 10M
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>