HOOVER HO9DC3E3078IN Electric Double Oven Instructions

June 12, 2024
Hoover

HOOVER HO9DC3E3078IN Electric Double Oven

Product Information

Product Name: Oven –
Model Number: Not specified –
Manufacturer: Not specified – Safety
Certifications : Compliant with European safety, health, and environmental requirements

Product Description

Control panel for setting cooking modes – Shelf positions for placing baking trays and plates – Metal grill for cooking food – Drip pan for collecting residues during cooking – Fan located behind the steel plate for even heat distribution – Oven door for accessing the oven cavity

Accessories
Metal grill – Drip tray –
Handle for tray – Lateral wire grids for holding metal grills and drip pans

Product Usage Instructions

Safety Indications:

  • Ensure that an electrician or qualified technician makes the electrical connections.
  • The power supply to which the oven is connected must conform with the laws in force in the country of installation.
  • The oven must be connected to an electrical supply with an earthed wall outlet or a disconnector with multiple poles.
  • The electrical supply should be protected with suitable fuses.
  • The cables used must have a transverse section that can ensure correct supply to the oven. 2.

Electrical Safety

  • Connect the appliance to an electrical supply with 220-240V AC power between phases or between the phase and neutral.
  • Check the oven’s maximum output on the rating plate before connecting it to the electrical supply.
  • Use a correctly rated circuit breaker/fuse.
  • Connect the grounding wire of the oven’s earth terminal to the earth terminal of the power supply. 3.

Recommendations:

  • Keep another wall socket available in case the oven needs to be removed from its installation space for maintenance work.
  • Only substitute the power cable with the assistance of technical service staff or technicians with equivalent qualifications.

Installation:

  • Follow the installation instructions provided by the manufacturer.

Waste Management and Environmental Protection

  • Dispose of the oven and its components in accordance with local waste management regulations.

Declaration of Compliance
The appliance is compliant with all relevant European safety, health, and environmental requirements.
Note: Please refer to the complete user manual for detailed instructions on display description, cooking modes, oven cleaning, maintenance, troubleshooting, and installation with fixing squares.

Safety Indications

  • During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature.

  • Cook the vegetables in a container with a lid instead of an open tray.

  • Avoid leaving food inside the oven after cooking for more than 15/20 minutes.

  • WARNING : the appliance and accessible parts become hot during use. Be careful not to touch any hot parts.

  • WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance.

  • WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks.

  • WARNING : in order to avoid any danger caused by the accidental resetting of the thermal interruption device, the appliance should not be powered by an external switching device, such as a timer, or be connected to a circuit that is regularly switched on and off.

  • Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.

  • Children should not play with the appliance.

  • The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental capacities, without experience or knowledge of the product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way with awareness of the possible risks.

  • Cleaning and maintenance should not be carried out by unsupervised children.

  • Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they can scratch the surface and cause the glass to shatter.

  • The oven must be switched off before removing the removable parts. After cleaning, reassemble them according the instructions.

  • Only use the meat probe recommended for this oven.

  • Do not use a steam cleaner for cleaning operations.

  • Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag and having the earth contact.
    The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional. ln case of incompatibility between the socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. The plug and the socket must be conformed to the current norms of the installation country. Connection to the power source can also be made by placing an omnipolar breaker between the appliance and the power source that can bear the maximum connected load and that is in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection should be easily accessible when the appliance is installed.

  • The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules.

  • lf the power cable is damaged, it should be substituted with a cable or special bundle available from the manufacturer or by contacting the customer service department. The type of power cable must be H05V2V2-F. This operation should becarried out by a suitably qualified professional. The earth conductor (yellow-green) must be approximately 10 mm longer than the other conductors. For any repairs, refer only to the Customer Care Department and request the  use of original spare parts.

  • Failure to comply with the above can compromise the safety of the appliance and invalidate the guarantee.

  • Any excess of spilled material should be removed before cleaning.

  • A long power supply failure during an occurring cooking phase may cause a malfunction of the monitor. ln this case contact customer service.

  • The appliance must not be installed behind a decorative door in order to avoid overheating.

  • When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity. The shelf must be inserted completely into the cavity.

  • WARNING : Do not line the oven walls with aluminium foil or singleuse protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating the enamel of the insides.

  • WARNING: Never remove the oven door seal.

  • CAUTION: Do not refill the cavity bottom with water during cooking or when the oven is hot.

  • No additional operation/setting is required in order to operate the appliance at the rated frequencies

General Instructions

We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damagedduring transportation. If you have doubts, do not usethe oven and refer to a qualified technician for advice.  Keep all of the packaging material (plastic bags, polystyrene, nails) out of the reach of children. When the oven is switched on for the first time, strong smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the model you have purchased.

Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some fundamental rules:

  • do not pull on the power cable to disconnect the plug from the socket;
  • do not touch the appliance with wet or damp hands or feet;
  • in general the use of adaptors, multiple sockets and extension cables is not recommended;
  • in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of  installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a disconnector with multiple poles, depending on the laws in force in the country of installation. The electrical supply should be protected with suitable fuses and the cables used must have a transverse section that can ensure correct supply to the oven.

CONNECTION
The Appliance should only be connected via a suitable cable, to an electrical supply with 220-240V AC power between phases or between the phase and neutral.
Before the oven is connected to the electrical supply, it is important to check:

  • Oven Max output on the rating plate.
  • Correctly rated circuit breaker/fuse.

The grounding wire connected to the ovens earth terminal must be connected to the earth terminal of the power supply.

WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the power supply’s earth terminal. The manufacturer accepts no responsibility for any accidents or other problems caused by failure to connect the oven to the earth terminal or by an earth connection that has defective continuity.

NOTE : as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications.

Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong smokey smells, we recommend not using the oven at very high temperature. It is better to extend the cooking time and lower the temperature a little. In addition to the accessories supplied with the oven, we advise you only use dishes and baking moulds resistant to very high temperatures.

Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The installation instructions for professionally qualified personnel must be followed. Incorrect installation may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury. The oven can be located high in a column or under a worktop. Before fixing, you must ensure good ventilation in the oven space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on last page according to the type of fitting.

Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contain both polluting substances (that can have a negative effect on the environment) and base elements (that can be reused). It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an environmental problem; it is essential to follow a few basic rules:

  • the WEEE should not be treated as domestic waste;
  • the WEEE should be taken to dedicated collection areas managed by the town council or a registered company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as long as the appliance is of an equivalent type and has the same functions as the purchased appliance.

SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For a significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the “delayed cooking” programme makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot.

Declaration of compliance
By placing the mark on the appliance, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

Product Description

Overview

  1. Control panel
  2. Shelf positions (lateral wire grid if included)
  3. Metal grill
  4. Drip pan
  5. Fan (behind the steel plate)
  6. Oven door

Accessories

HOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-6

  1. Metal grill
    Holds baking trays and plates

  2. Drip tray
    Collects the residues that drip during the cooking of foods on the grills .HOOVER-HO9DC3E3078IN-Electric-Double-Oven-FIG-

  3. Drip pan

  4. Handle for tray

  5. Lateral wire grids
    It located at both sides of the oven cavity.
    It holds metal grills and drip pans.

First Use
PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness.

Use of the Oven

Display descriptionHOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-9

  1. Timer
  2. Cooking time
  3. End of cooking
  4. Timer display
  5. LCD display adjustment controls
  6. Thermostat knob (upper cavity)
  7. Function selector knob (upper cavity)
  8. Upper cavity signal lamp
  9. Thermostat knob (lower cavity)
  10. Function selector knob (lower cavity)
  11. Lower cavity signal lamp

WARNING!
The first operation to carry out after the oven has been installed or following the interruption of power supply (this is recognizable the display pulsating and showing 12:00 ) is setting the correct time. This is achieved as follows.

  • Push the central button 4 times
  • Set time with “-” “+” buttons.
  • Release all buttons.
    ATTENTION: The oven will only operate providing the clock is set.

HOOVER-HO9DC3E3078IN-Electric-Double-Oven-FIG-10HOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-11Cooking Modes

HOOVER-HO9DC3E3078IN-Electric-Double-Oven-FIG-12 *Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.

Oven cleaning and maintenance

General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based detergents (ammonia).

GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse with water.

OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.

ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive detergents.

DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.

Maintenance
INSTRUCTION FOR REMOVAL AND CLEANING OF THE SIDE RACKS

  1. Remove the wire racks by pulling them in the direction of the arrows (see below)
  2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are dried afterwards.
  3. After the cleaning process install the wire racks in reverse order.

REMOVAL OF THE OVEN WINDOW

  1. Open the front window.
  2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them downwards.
  3. Replace the window by carrying out the procedure in reverse.

REMOVAL AND CLEANING OF THE GLASS DOOR

  • 1. Open the oven door.
  • 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
  • 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)).
  • 7. At the end of cleaning or substitution, reassemble the parts in reverse order.
    On all glass, the indication “Pyro” must be legible and positioned on the left side of the door, close to the left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.HOOVER-
HO9DC3E3078IN-Electric-Double-Oven-FIG-14HOOVER-HO9DC3E3078IN-Electric-Double-Oven-FIG-15

CHANGING THE BULB

  1. Disconnect the oven from the mains supply.
  2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
  3. Once the defective bulb is replaced, replace the glass cover

Hydro easy clean function (according to model)

The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the oven.

  1. Pour 300 ml of water into the HYDRO EASY CLEAN container at the bottom of the oven.
  2. Set the oven function to Static ( )or Bottom ( )heater
  3. Activate HYDRO EASY CLEAN mode by setting the temperature on 100°C or icon ( )
  4. Allow the program to operate for 30 minutes.
  5. After 30 minutes switch off the program and allow the oven to cool down.
  6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

Warning
Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns.
Use distilled or drinkable water

Troubleshooting

FAQHOOVER-HO9DC3E3078IN-Electric-Double-Oven-FIG-21

Installation

OVEN FITTED UNDER WORKTOP VENTILATION REQUIREMENTS MUST BEAS SPECIFIED BY THE DRAWING BELOWHOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-22

For Equepped With Fixing Squares B: 720
OVEN FITTED BETWEEN FURNITURESHOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-23HOOVER-HO9DC3E3078IN-Electric-Double-Oven-
FIG-24

The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right to carry out modifications to products as required, including the interests of consumption, without prejudice to the characteristics relating to safety or function.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals