wave 3S-2448 Amped Small Portable Speaker User Manual
- June 12, 2024
- wave
Table of Contents
wave 3S-2448 Amped Small Portable Speaker
Product Information
- Bluetooth pairing name: Amped Series Small 3S-2448
- Battery & Charging Capacity: 3.7V / 2200mAh
- Speaker Driver/s: x2 45mm / 6W
- Battery life: 6.5 hrs
- S/N: 78db
- Auto-turn off: within 10 mins of inactivity
- Standby time: 180 days
- Frequency response: 70-20k Hz
- Charge time: 2.5 – 3.5 hrs
- Bluetooth (BT) Version: 5.0
- Charge current: 5V / 1A
- Charge method: USB-C input
- Chipset: MVSILICON BP1V808
- BT range: [range not specified]
Product Usage Instructions
- Turn on the device by long-pressing the power button for 2 seconds.
- To turn off the device, long-press the power button for 2 seconds.
- To disconnect from Bluetooth, double press the power button.
- To connect to the last paired device, double press the power button.
- To play or pause audio playback, short press the power button.
- To answer an incoming call, short press the power button.
- To go to the previous song, long-press the power button for 2 seconds.
- To decrease the volume, short press the power button.
- To end a call, short press the power button.
- To refuse a call, long-press the power button.
- To redial the last number, double press the power button.
- To clear pairing history and turn off Bluetooth, press and hold the power button for 5 seconds.
- To enter TWS pairing mode with another Amped Speaker, long-press the power button for 2 seconds.
Instructions
-
Turn on – Long press for 2 seconds
-
Turn off – Long press for 2 seconds
-
Disconnect Bluetooth – Double press
-
Connect to last paired device – Double press
-
Play / Pause – Short press
-
Answer call – Short press
-
End call – Short press
-
Enter TWS pairing mode with another Amped Speaker – Long press for 2 seconds
-
Refuse call – Long press
-
Redial the last number – Double press
-
Clear pairing history and turn off – Press and hold for 5 seconds
-
Reset speaker – Use a thin needle to press the button behind the speaker holder
-
Volume up – Short press
-
Next song – Long press for 2 seconds
-
Lights on/off – Press the + and – buttons at the same time
-
Previous song – Long press for 2 seconds
-
Volume down – Short press
LED Light Indicator Pattern
Bluetooth not connected – Bluetooth indicator light flashes quickly
Bluetooth connected – Bluetooth indicator light is active
Charging – The red indicator light near the charging port is on
Charged – The red indicator light near the charging port is off
Technical Specifications
Bluetooth pairing name: Amped Series Small 3S-2448
Battery & Charging
- Capacity: 3.7V / 2200mAh
- Battery life: 6.5 hrs
- Auto-turn of: within 10 mins of inactivity
- Standby time: 180 days
- Charge time: 2.5 – 3.5 hrs
- Charge current: 5V / 1A
- Charge method: USB-C input
Durability
- IPX rating: IPX7 (floats)
- Operating temp: 10°C – 55°C
Input & Control
- nput: USB-C (charging), AUX, TF Slot
- Cables included: 1x USB-C
Speaker
- Driver/s: x2 45mm / 6W
- S/N: 78db
- Frequency response: 70-20k Hz
Bluetooth (BT)
- Version: 5.0
- Chipset: MVSILICON BP1V808
- BT range: <10m/33ft
TWS range: <10m/33ft
BT frequency: 2.4GHz
Mic
- Sensitivity: -53.3 (±3) db
- Frequency range: 60Hz-13KHz
- Range: <50cm/1.6ft
thank you for your support!
We are Australia’s newest audio brand, created in Melbourne and we’d love to
hear about your experience with our product
Scan the QR code and share your experience to receive 10% o your next purchase.
waveaudio.com.au
©2023 3sixT. All rights reserved.
This product may be covered by one or more patents.
Tenancy: E1/5 Grevillea Pl Brisbane Airport QLD 4008.
EU Importer: Wentronic GmbH, Pillmannstraße 38112,12 Braunschweig
Germany.
- Dimensions: 90 x 94 x 110 mm
- Weight: 420g
- Material: ABS + TPU + Fabric
FCC
Only charge with devices rated and marked with 5V to avoid damage to the speaker. Do not open up the speaker,it voids the warranty and may damage the product. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles varies by use and settings. Never place the speaker close to high temperature heat sources. To keep the warranty valid, never try to repair the product yourself. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warranty
For information on compliance, warranty, terms & conditions please visit our website at waveaudio.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>