Jabra Speak 810 Conference Speakerphone User Manual
- June 12, 2024
- Jabra
Table of Contents
Jabra Speak 810 Conference Speakerphone
© 2015 GN Audio A/S (GN Netcom A/S). All rights reserved.
Jabra® is a trademark of GN Audio A/S (GN Netcom A/ S). The Bluetooth® word
mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by GN Audio A/S (GN Netcom A/S) is under license. Other
trade markws and trade names are those of their respective owners.
Welcome
Thank you for using the Jabra Speak 810. We hope you will enjoy it!
Jabra Speak 810 features
- Zoom Talk microphone with adaptive directionality 5 m/15 ft. range (15 persons)
- Connectivity: USB, BT/NFC & 3.5 jack
- Built-in tablet & mobile phone charging port
- Option to attach a Kensington lock
Speaker Overview
How to Position
For the best audio quality
- Place the Jabra Speak 810 onto a flat surface, ideally in the center of the meeting group.
- Do not cover the speaker with stickers or labels.
- Do not balance the Jabra Speak 810 on top of cables. Use the cable slots on the base.
- Ensure to adjust the speaker volume to best suit your needs.
Connect to Power
Plug the power supply into the power supply port on the base of the Jabra
Speak 810, secure the cable in the cable slot, and then connect to power.
Charging your phone or tablet
You can charge your mobile phone or tablet by using the Mobile charging port
on the Jabra Speak 810.
How to Connect
Connect to USB device
- Ensure the Jabra Speak 810 is connected to power using the power supply.
- Plug the attached USB cable into any USB port on your PC.
Connect to the headset port on a mobile device
- Ensure the Jabra Speak 810 is connected to power using the power supply.
- Plug the attached 3.5 mm jack cable into the headset port on your mobile device.
Pair to Bluetooth device
- Ensure the Jabra Speak 810 is connected to power using the power supply.
- Tap the Bluetooth button on the Jabra Speak 810, and follow the voice-guided connection instructions.
- Select the Jabra Speak 810 from the list of devices on your mobile device Bluetooth list.
Reconnecting
The Jabra Speak 810 is designed to be used in rooms where many people may
access the unit.
Therefore, it does not automatically reconnect to known devices – you must
reconnect manually. The Jabra Speak 810 can remember up to 900 devices in the
pairing list. However, there can be only one active Bluetooth connection at a
time.
Manual disconnect
To manually disconnect your Bluetooth device from the Jabra Speak 810, tap the Bluetooth button on the Jabra Speak 810.
Permanent connection
To permanently connect a Bluetooth device to the Jabra Speak 810, follow the
steps above and then hold the Bluetooth button for 8 seconds until a permanent
connection is announced.
To disconnect a permanent connection, hold the Bluetooth button for 8 seconds.
Connect to NFC-enabled device
- Ensure the Jabra Speak 810 is connected to power using the power supply.
- Slide your NFC-enabled device directly against the NFC zone on the Jabra Speak 810 until a connection is confirmed on your mobile device.
NOTE : To disconnect your NFC-enabled device from the Jabra Speak 810, slide it directly against the NFC zone on the Jabra Speak 810.
Connect to Jabra Link 360
- Ensure the Jabra Speak 810 is connected to power using the power supply.
- Insert the Jabra Link 360 into your PC, and wait for it to automatically install the relevant drivers.
- When the Jabra Link 360 starts flashing blue, tap the Bluetooth button on the Jabra Speak 810 to connect to the Jabra Link 360.
- You will hear a connection confirmation when the Jabra Link 360 and the Jabra Speak 810 are connected.
NOTE : To disconnect the Jabra Link 360 from the Jabra Speak 810, tap the Bluetooth button on the Jabra Speak 810.
How to Use
| Function| Action
---|---|---
| Answer call| Tap the Answer call button
| End/reject call| Tap the End/reject button
+ / –
| Volume up/ down| Tap, or press and hold, the Volume + or Volume – button
| Mute/unmute microphone| Tap the Mute button
Enable/ disable voice guidance| Press and hold (8 secs) the Mute button
Software
Jabra Direct
Jabra Direct is software designed to support, manage, and enable optimal functionality for Jabra devices. It is highly recommended to download and install Jabra Direct on your PC.
Download the latest version from jabra.com/direct
Update Jabra Speak 810 firmware
Firmware updates improve performance or add new functionality to Jabra devices.
To update firmware :
- Connect the Jabra Speak 810 to a PC using the attached USB cable.
- Download and install Jabra Direct on your PC.
- Check for the latest firmware via Jabra Direct. You will receive update notifications whenever there is an update available for your device.
Support
FAQ
View the Jabra Speak 810 FAQ on jabra.com/ speak810
How to care for your Jabra Speak 810
- Avoid storage at extreme temperatures (above 45°C/113°F or below -5°C/23°F)
- Do not expose the Jabra Speak 810 to rain or other liquids
- Do not cover the Jabra Speak 810 with stickers or labels
Technical Specifications
Jabra Speak 810 | Specification |
---|---|
Weight | 965 g |
Dimensions | L 360 mm x W 180 mm x H 39.5 mm |
Microphones | 6 digital microphones |
Speaker | 2” high-performance full range |
Bluetooth range: | 30 m |
Bluetooth version: | 4.1 |
Paired devices: | 1 active connection. Up to 900 paired connections are stored |
in the Jabra Speak 810
Supported Bluetooth profiles:| A2DP(v1.2), Hands Free Profile (v1.6), Headset
profile(v1.2)
Tablet and mobile phone charging port support:| 2.1A
Standby consumption:| 0.15W
Max consumption:| 25W
Operating temperature:| 5°C to 45°C (41°F to 113°F)
Storage temperature:| -5° C to 45°C (23°F to 113°F)
Pairing passkey or PIN:| 0000
Reference:Jabra Speak 810 Conference Speakerphone User Manual- device.report
References
- Wireless Headsets and Headphones for Office, Music & Sport | Jabra
- Wireless Headsets and Headphones for Office, Music & Sport | Jabra
- Jabra Speak 810
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>