HONOR AF33-3 Charging Dock Band User Guide

HONOR AF33-3 Charging Dock Band

Product Information

The product is a wearable device that includes features such as a heart rate sensor, charging port, quick-release mechanism, screen, and function button. It also has wireless capabilities and is designed to be used in compliance with EU regulations. The device comes with a user manual that provides instructions on how to use and maintain it safely.

Key Features

• Heart rate sensor
• Charging port
• Quick release mechanism
• Screen
• Function button
• Wireless capabilities

Compliance

The device complies with EU regulations for electronic devices.

Disposal and Recycling

The product, battery, and accompanying documentation should be disposed of in designated waste collection points for electronic devices and batteries. They should not be thrown away with regular household waste.

Product Usage Instructions

Operating and Safety Instructions

• Do not store or transport the device in environments where explosive or flammable materials are present.
• Avoid using the device in dusty, smoky, humid, or dirty environments, as well as near magnetic fields.
• To prevent accidents, do not use the wireless device while driving.
• If the battery leaks, avoid direct contact with the electrolyte. In case of contact with skin or eyes, rinse immediately with clean water and seek medical attention.
• Wireless devices may interfere with aircraft systems. Do not use the device in areas where wireless devices are prohibited according to airline regulations.

Product Disposal and Recycling Instructions

At the end of its lifecycle, the product and battery should be taken to designated waste collection points for electronic devices and batteries. They should not be disposed of in regular waste bins.

Powering on the band

• Insert the protruding part of the charging dock into the positioning hole of the band strap, then fasten the buckle. The battery level will be displayed on the screen.

Wipe the port, metal contacts, and the device dry during charging.

Downloading app

• Scan the QR code to download and install the app for managing the device.

Copyright © Honor Device Co., Ltd. 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND DOES NOT CONSTITUTE ANY KIND OF WARRANTY.
Trademarks and Permissions
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license.
Other trademarks, products, services, and company names mentioned may be the property of their respective owners.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/.
Blasting Caps and Areas
Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.
Areas with flammables and explosives
Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example. Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in the text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Operation and safety

• Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion, or other hazards.
• Ideal temperatures are -10°C to +45°C.
• Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
• The device has a built-in, non-removable battery, do not attempt to remove the battery, otherwise, the device may be damaged.
• When charging the device, make sure the power adapter is plugged into a socket near the device and is easily accessible.
• Please consult your doctor and the device manufacturer to determine if the operation of your device may interfere with the operation of your medical device.
• This product is not designed to be a medical device and is not intended to diagnose, treat, cure, or prevent any disease. All data and measurements should be used for personal reference only.
• If you experience skin discomfort when wearing the device, take it off and consult a doctor.
• Wipe the charging port dry before charging.
• Adult supervision is advised if children are to use or come into contact with this product.
• Switch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
• Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker.
• If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
• To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields.
• Do not use, store, or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
• Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
• If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a doctor.
• Wireless devices may interfere with the airplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations.
• Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
• Ensure that the power adapter meets the requirements of Clause Q. 1 in IEC62368-1/EN62368-1 and has been tested and approved according to national or local standards.
• Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp objects, these may damage the device.
• Use the radio equipment in good reception conditions to reduce the amount of radiation received.
• Keep radio equipment away from the belly of pregnant women.
• Keep radio equipment away from the lower abdomen of teenagers.
• Respect for the restrictions of use specific to certain places (hospitals, planes, service stations, schools …).

Disposal and recycling information

The crossed-out wheeled bin symbol on your product, battery, literature, or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical t electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment help ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.
Reduction of hazardous substances
This device and any electrical accessories are compliant with locally applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS, and Batteries (where included) regulations, etc. For declarations of conformity about REACH and OHS, please visit our website https://www.hihonor.com/global/legal/certification/.

EU regulatory conformance

RF exposure requirements
Your device is low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits established by the European Commission for exposure to radio waves.

Statement

• Hereby, Honor Device Co., Ltd. declares that this device CRS-B39S is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at https://www.hihonor.com/global/legal/certification/.
• This device may be operated in all member states of the EU.
• Observe national and local regulations where the device is used.
• This device may be restricted for use, depending on the local network.

Frequency bands and power

• Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
• Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
• The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Bluetooth: 10 dBm.

Accessories and Software Information

• It is recommended that the following accessories should be used:
• Charging dock: AF33-3
• The product software version is 1.1.0.166
• Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.
• All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
• For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at  https://www.hihonor.com/global/legal/certification/.
• Please visit https://www.hihonor.com/global/support/ for a recently updated hotline and email address in your country or region.
• Please go to More > System > Regulatory on the device to view the E-label screen.

References

• HONOR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>