RYOBI OPP1820 Cordless Chainsaw Instruction Manual
- June 12, 2024
- RYOBI
Table of Contents
OPP1820
RPP1820Li
ORIGINAL INSTRUCTIONS
OPP1820 Cordless Chainsaw
I mportant! It is essential that you read the instructions in this manual
before operating this machine.
Subjuect to technical modifications
Product
specifications
Voltage No load chain speed Bar length Chain pitch Chain type Low profile skip
tooth narrow kerf Weight with battery pack Measured sound pressure level
Measured sound power level Vibration level
Replacement parts Chain Bar
NOTE: Chain must be fitted with bar from the same manufacturer according
to above combinations.
Battery and charger
Model
Battery Pack
Charger
Compatible Battery
Packs
Compatible Charger
Chain and Bar Information
Manufacturer
Saw Chain Model
Guide Bar Model
LIMITED WARRANTY
TTI warrants this outdoor product to be free of defects in material and
workmanship for 24 months from the date of purchase by the original purchaser,
subject to the limitations below. Please keep your invoice as proof of date of
purchase.
This warranty is only applicable where the product is used for personal and
non-commercial purposes. This warranty does not cover damage or liability
caused by / due to misuse, abuse, accidental or intentional acts by user,
improper handling, unreasonable use, negligence, failure by end user to follow
operating procedures outlined in the user’s manual, attempted repair by non-
qualified professional, unauthorized repair, modification, or use of
accessories and/or attachments not specifically recommended by authorized
party. Please see your local dealer for list of authorized service centers in
your area.
This warranty does not cover belts, brushes, bags, bulbs or any part which
ordinary wear and tear results in required replacement during warranty period.
This warranty does not cover transportation cost or consumable items such as
fuses and batteries.
This limited warranty is void if the product’s original identification (trade
mark, serial number) markings have been defaced, altered or removed or if
product is not purchased from an authorized reseller or if product is sold AS
IS and / or WITH ALL FAULTS.
Where permitted, the provisions of this limited warranty are in lieu of any
other written warranty, whether express or implied, written or oral, including
any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT HALL WE BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES. OUR MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID
BY YOU FOR THE PRODUCT.
This warranty is valid only in the European Union, Australia and New Zealand.
Outside these areas, please contact your authorized Ryobi dealer to determine
if another warranty applies.
AUTHORISED SERVICE CENTRE
To find an authorised service centre near you, visit ryobitools.eu.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents.
2006/42/EC, 2004/108/EC, 2011/65/EU, EN55014-1:2006+A1:2009;
EN55014-2:1997+A1:2001+A2:2008; EN60745-1:2009+A11; EN ISO 11680-1:2011
Measured sound power level 90.3 dB(A)
Guaranteed sound power level 94 dB(A)
Conformity assessment method to EN ISO 11680-1:2011
Serial number: See product rating label
Year of construction: See product rating label
Machine: CORDLESS POLE SAW
Type: OPP1820/RPP1820Li
Techtronic Industries
**** May 2012
Techtronic Product Development Limited
24/F, CDW Building, 388 Castle Peak Road, Tsuen Wan, Hong Kong Andrew John
Eyre (BEng, CEng, MIET)
Vice President of Engineering May, 2012
Authorised to compile the technical file:
Klaus Hahn
Techtronic Industries (UK) Limited
Medina House, Fieldhouse Lane, Marlow, Bucks, SL7 1TB, United Kingdom
Downloaded from www.Manualslib.com manuals search
engine
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>