amazon basics B07CM5NZRC Wireless Keyboards with Touchpad for Smart TVs User Guide

June 12, 2024
amazon basics

amazon basics B07CM5NZRC Wireless Keyboards with Touchpad for Smart TVs

amazon-basics-B07CM5NZRC-Wireless-Keyboards-with-Touchpad-for-Smart-TVs-
product

Contents

Before getting started, ensure the package contains the following components:

amazon-basics-B07CM5NZRC-Wireless-Keyboards-with-Touchpad-for-Smart-TVs-
fig-1 amazon-
basics-B07CM5NZRC-Wireless-Keyboards-with-Touchpad-for-Smart-TVs-
fig-2 amazon-
basics-B07CM5NZRC-Wireless-Keyboards-with-Touchpad-for-Smart-TVs-
fig-3 amazon-
basics-B07CM5NZRC-Wireless-Keyboards-with-Touchpad-for-Smart-TVs-
fig-4

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

  • Never use this product if damaged.
  • Do not insert any foreign objects into the inside of the casing.
  • Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight, water, high humidity, moisture, strong jolts, flammable gases, vapors, and solvents.

Battery Warnings

  • Keep batteries out of reach of children.
  • Do not mix new and used batteries.
  • Exhausted batteries should be removed immediately. Dispose of batteries properly, as indicated in this manual.
  • Store unused batteries in original packaging away from metal objects. If already unpacked, do not mix new and used batteries.
  • Remove the batteries if the product will go unused for an extended period.
  • If the batteries leak, avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.
  • When used correctly, primary batteries provide a safe and dependable source of portable power. However, misuse or abuse may result in leakage, fire, or rupture.
  • Always take care to install your batteries correctly observing the”+” and”-” marks on the battery and the device. Batteries that are incorrectly placed into some equipment may be short­circuited, or charged. This can result in a rapid temperature rise causing venting, leakage, rupture and personal injury.
  • Replace all batteries of a set at the same time. When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over­discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
  • Store unused batteries in their original packaging and away from metal objects. Unpacked batteries could be jumbled or get mixed with metal objects. This can cause battery short­circuiting which may result in venting, leakage and rupture and personal injury; one of the best ways to avoid this happening is to store unused batteries in their original packaging.
  • Remove discharged batteries from equipment promptly to avoid possible damage from leakage. When discharged batteries are kept in the equipment for a long time, electrolyte leakage may occur causing damage to the appliance and/or personal injury.
  • Never dispose of batteries in fire. When batteries are disposed of in fire, the heat build-up may cause rupture and personal injury. Do not incinerate batteries except for approved disposal in a controlled incinerator.
  • Never attempt to recharge primary batteries. Attempting to charge a non-rechargeable (primary) battery may cause internal gas and/or heat generation resulting in venting, leakage, rupture and personal injury.
  • Never short circuit batteries as this may lead to high temperatures, leakage, or rupture. When the positive (+) and negative (-) terminals of a battery are in electrical contact with each other, the battery becomes short-circuited. This may result in venting, leakage, rupture and personal injury.
  • Never heat batteries in order to revive them. When a battery is exposed to heat, venting, leakage and rupture may occur and cause personal injury.
  • Remember to switch off devices after use. A battery that has been partially or completely exhausted may be more prone to leak than one that is unused.
  • Never attempt to disassemble, crush, puncture or open batteries. Such abuse may result in venting, leakage, and rupture, and cause personal injury.
  • Keep batteries out of the reach of children, especially those batteries fitting within the limits of the ingestion gauge as shown in Figure 1.
  • Immediately seek medical attention if a cell or battery has been swallowed. Also, contact your local poison control center.

Setup

Installing the Batteries

  1. Remove the battery cover.
  2. Insert the batteries correctly with regard to polarity(+ and-) marked on the battery and the product.
  3. Place the cover back over the battery compartment.
  4. Always purchase the correct size and grade of battery most suitable for the intended use.
  5. Clean the battery contacts and also those of the device prior to battery installation.
  6. Ensure the batteries are installed correctly with regard to polarity(+ and -).
  7. Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly.

Pairing
Plug the nano receiver into a USB port of your computer or smart lV. The connection between keyboard and nano receiver should occur automatically. Product is compatible with Smart lVs which support HID technology. If the connection cannot be established automatically, you can initiate the pairing manually. Proceed as follows:

  1. Re-plug the receiver into the USB port on your computer or smart lV, then press “ESC + K” to pair. If the keyboard does not work after 10 seconds, pair them again. The receiver has an auto pairing function.
  2. The LED indicator on the keyboard flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.
  3. When the battery level is low, the battery indicator on the keyboard will start to blink.
  • Red LED is ON for 10 sec. Power ON
  • Red LED blinks for 10 sec. Low battery warning
  • Red LED is ON  for 10 sec. Pairing (LED OFF when paired or failed after 10 sec.)
  • Blue LED is ON Caps Lock ON

Touchpad Gestures

Scroll
Use two fingers to scroll up and down or left and right.

Zoom in & Zoom out
Pinch outwards to zoom in or pinch inwards to zoom out.

Cleaning and Maintenance

  • Clean the product with a dry lint-free cloth. Do not allow any water or other liquids enter the product’s interior.
  • Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning.
  • Clean the battery contacts and also those of the product prior to battery installation.

FCC – Supplier’s Declaration of Conformity

  • Unique Identifier
    • B07CM5NZRC, B07CMFKZ6Q, B07CMCBHN5, B07CMH4P96, B07CM7RQ46, B07CNPXZJ4 Wireless Keyboard with Touchpad for Smart 1Vs
  • Responsible Party
  • U.S. Contact
    • 410 Terry Ave N.
  • lnfonnation
    • Seattle, WA 98109, United States
  • Telephone Number
    • (206) 266-1 000

FCC Compliance Statement

  1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
  2. this device may not cause harmful interference, and
  3. this device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Canada IC Notice

  • This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
    1. this device may not cause interference, and
    2. this device must accept any interference, including interference that may cause undesired operation of the device.
  • This Class B digital apparatus complies with Canadian CAN NMB-3(8) standard.

Simplified EU Declaration of Conformity

  • Hereby, Amazon EU Sari declares that the radio equipment type B07CM5NZRC, B07CMFKZ6Q, B07CMCBHN5, B07CMH4P96, B07CM7RQ46, B07CNPXZJ4 is in compliance with Directive 2014/53/EU.
  • The full text of the EU declaration of conformity is available at the following internet address: https://www.amazon.co.uk/amazon_private_brand_EU_compliance

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Battery Disposal

Do not dispose of used batteries with your household waste. Take them to an appropriate disposal/collection site.

Specifications

  • Voltage/battery type: 3 V, 2 × 1.5 V AAA
  • Product dimensions (W x H x D): approx. 14.7 x 0.9 × 5 in (37.3 x 2.4 x 12.8 cm)
  • Product net weight: approx. 0.72 lbs (0.33 kg)
  • Transmission power: 0 dBm
  • Frequency band: 2.402GHz-2.480GHZ

Feedback and Help
Love it? Hate it? Let us know with a customer review. AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

amazon basics User Manuals

Related Manuals