HAVIT FreeGo1 AIR Air Conduction Headphone User Manual
- June 12, 2024
- havit
Table of Contents
HAVIT FreeGo1 AIR Air Conduction Headphone User Manual
Packing list
-
Headphone”t
-
User manual x 1
-
**certificate of quality”t
**
Production structure
- Multi-function button(MFB)
- Volume -Next rack
- Volume+/Previous track
- LED indicator
- Charging port
- Speaker
Power on/Bluetooth connection
Follow the steps(Please make sure that your phone is builtin Blustooth function)
- Power on: Long press the MFB for 3 seconds to tum on.The LED indicator flashes alterately with blue and red, the headphone enters the paifing status.
- Activate the Bluetooth function and search for *Freego1 AI” referring to your phone instructions Click “Freego Air” to connect
- The headphone can automatically reconnect with the last device that you had paired. Freego1 Airwill disconnect when leave the working range of Bluetooth. The headphone will reconnect automatically if you come back tothe range in 3 minutes.
bLong press the MFB for 5 seconds to turn off,
Answer the incoming call
Press the MFB once to answer incoming cal. Tips: Since some mobile phones
default o answer calls via their own receiver, please refer to the
Instructions of your phone and set on your phone.
Hang up the current call
Press the MFB once to hang up the current call
Decline the call Long
press the MFB for 2 seconds to reject the incoming call
Music control
- PlaylPause: Press the MFB once
- NEXT: Long press the – for 2 seconds to Select the next track
- REV: Long press the + for 2 seconds to Select the previous track
- Volume – Press the – once
- Volume *+”: Press the + once.
Activate the voice assistant
‘Triple clck the MFB to activate the voice assistant
Restore factory settings
If the earbuds can’t pair frequently, please factory settings.Long press the and Volume + bution for 4 seconds at the same time untl the indicator flashes blue for 3 times. The headphone will enter the paifing mode again , search the Freegot Air”bluetooth pairing name with the mobile phone and connect again.
Charging
- As product s buitin non-removable and rechargeable battery, please use the provided charging cable to charge. When charging the headphone will automatically power off.
- Fully charge the product before the first use. ittakes about 2H to charge for the subsequent use.
- The LED indicator is solid red when charging.The indicator turns solid blue when the battery is fully charged.
Notes
a. Please choose the charger that s certfied by the regular manufacturer.
b.The battery performance may decrease as repeating charging and using the
product. It’s a normal phenomenon for all rechargeable bateries.
Specifications
Battery: 110mAh
Play time: 12H(80% Vol.)
Talk time: 10H(80% Vol )
Charging time: About 2Hours
Speaker size: 16.2mm
Input Voltage/Current: DC 5V/110mA.
Warnings:
- Please follow the instruction o operate.
- Please keep the headphone from heat Source, such as radiators, hot aif regulators, Stoves, or other heat generating instruments. As itis not ant-high temperature.
- Don’tjam the ports of the headset, such as charger port, LED port and microphone ec.
- In order to protect your hearing and extend the product speaker service lfe, iLis not recommended to adjust the volume to the ‘maximum level for a long time.
- Whatever reasons damage the headset, please feel free to contact our after-sales staff n time rather than repair by yourseif Othenwise, you will accept without after-sales service.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
Documents / Resources
|
HAVIT FreeGo1 AIR Air Conduction
Headphone
[pdf] User Manual
2AI6I-FREEGO1AIR, 2AI6IFREEGO1AIR, freego1air, FreeGo1 AIR Air Conduction
Headphone, FreeGo1 AIR, Air Conduction Headphone, Headphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>