YOLINK YS8003-UC Temperature and Humidity Sensor User Guide
- June 12, 2024
- YOLINK
Table of Contents
Temperature & Humidity Sensor
YS8003-UC
Quick Start Guide
Revision Apr. 14, 2023
Welcome!
Thank you for purchasing Yilin products! We appreciate you trusting Yilin for
your smart home & automation needs. Your 100% satisfaction is our goal. If you
experience any problems with your installation, with our products or if
you have any questions that this manual does not answer, please contact us
right away. See the Contact Us section for more info.
Thank you!
Eric Vans
Customer Experience Manager
The following icons are used in this guide to convey specific types of
information:
**** Very important information (can save you time!)
Good to know info but may not apply to you
Before You Begin
Please note: this is a quick start guide, intended to get you started on the installation of your Temperature & Humidity Sensor. Download the full Installation & User Guide by scanning this QR code:
Installation & User Guide
http://www.yosmart.com/support/YS8003-UC/docs/instruction
You can also find all guides and additional resources, such as videos and
troubleshooting instructions, on the Temperature & Humidity Sensor Product
Support page by scanning the QR code below or by visiting:
https://shop.yosmart.com/pages/temperature-humidity-sensor-productsupport
Product Support
[ https://shop.yosmart.com/pages/temperature-humidity-sensor-product-
support](https://shop.yosmart.com/pages/temperature-humidity-sensor-product-
support)
**** Your Temperature & Humidity Sensor connects to the internet via a Yilin
hub (Speaker Hub or the original Yilin Hub), and it does not connect directly
to your WiFi or local network. In order for remote access to the device from
the app, and for full functionality, a hub is required. This guide assumes the
Yilin app has been installed on your smartphone, and a Yilin hub is installed
and online (or your location, apartment, condo, etcetera, is already served by
a Yilin wireless network).
To provide years between battery changes, your sensor refreshes at least once
an hour or more frequently if the SET button is pressed or if the temperature
or humidity change meets refresh criteria as explained in the user guide.
In the Box
Required Items
You may require these items:
| | |
---|---|---|---
Medium Phillips Screwdriver| Hammer| Nail or Self Tapping Screw| Double-sided
Mounting Tape
Get to Know Your Temp & Humidity Sensor
LED Behaviors
Blinking Red Once, then Green Once
Device turned on
Blinking Red And Green Alternately
Restoring to Factory Defaults
Blinking Green Once
Switching temperature mode
Blinking Green
Connecting to Cloud
Slow Blinking Green
Updating
Blinking Red Once
Device alerts or device is connected to the cloud and is functioning normally
Fast Blinking Red Every 30 Seconds
Batteries are low; please replace the batteries
Power Up
Install the App
If you are new to Yilin, please install the app on your phone or tablet, if
you have not already. Otherwise, please proceed to the next section.
Scan the appropriate QR code below or find the “Yilin app” on the appropriate
app store.
|
---|---
Apple phone/tablet iOS 9.0 or higher
http://apple.co/2Ltturu| Android phone/
tablet 4.4 or higher
http://bit.ly/3bk29mv
Open the app and tap Sign up for an account. You will be required to provide a
username and a password. Follow the instructions, to set up a new account.
Allow notifications, when prompted.
You will immediately receive a welcome email from no-reply@yosmart.com with some helpful information. Please mark the yosmart.com
domain as safe, to ensure you receive important messages in the future.
Log in to the app using your new username and password.
The app opens to the Favorite screen.
This is where your favorite devices and scenes will be shown. You can organize
your devices by room, in the Rooms screen, later.
Refer to the full user guide and online support for instructions on the use of
the YoLink app.
Add the Sensor to the App
-
Tap Add Device (if shown) or tap the scanner icon:
-
Approve access to your phone’s camera, if requested. A viewfinder will be shown on the app.
-
Hold the phone over the QR code so that the code appears in the viewfinder.
If successful, the Add Device screen will be displayed. -
You can change the device name and assign it to a room later. Tap Bind device.
Install the Temperature & Humidity Sensor
Environment Considerations:
Determine an appropriate location for your sensor.
Please note: the Temperature & Humidity Sensor is intended for indoor
use, at dry locations. Refer to the product support page for the full
environmental specifications.
- Consider our Weatherproof Temperature & Humidity Sensor for outdoor locations.
- If you plan to use this sensor in a freezer, ensure the sensor does not get wet during defrosting cycles.
Location Considerations:
If placing the sensor on a shelf or countertop, ensure it is a stable surface.
If hanging or mounting the sensor on a wall, ensure the mounting method is
secure, and the location does not subject the sensor to physical damage. The
warranty does not cover physical damage.
- Do not place the sensor where it may get wet
- Do not place the sensor where it will be subjected to direct sunlight
- Avoid placing the sensor near HVAC grilles or diffusers
-
Before installing or placing your sensor, ensure the display mode is correct for your application. To switch between Celsius and Fahrenheit display mode, briefly press the SET button (on the rear of the sensor).
-
If placing the sensor on a shelf or countertop or other stable service, place the sensor where desired, then proceed to the next section.
-
Before mounting or hanging the sensor on the wall or vertical surface, determine your desired method:
• Hang the sensor from a nail or screw or small hook
• Hang or mount the sensor by other methods, such as 3M brand Command hooks
• Secure the sensor to the wall using mounting tape, Velcro or similar methods. If affixing something to the rear of the sensor, be aware of the impact of covering the SET button or LED, and allow for battery replacement in the future. -
Mount or hang the sensor on the wall or vertical surface using your desired method. (Insert a screw into the wall, hammer a nail into the wall, etc.)
-
Allow your sensor at least one hour to stabilize and report the correct temperature and humidity to the app. Refer to the full installation & user guide for instructions on calibrating your sensor, if it does not appear to indicate the correct temperature and/or humidity.
Refer to the full Installation & User Guide, to complete the setup of your Temperature & Humidity Sensor.
Contact Us
We are here for you, if you ever need any assistance installing, setting up or
using a YoLink app or product!
Need help? For fastest service, please email us 24/7 at
service@yosmart.com Or call us at
831-292-4831 (US phone support hours:
Monday – Friday, 9AM to 5PM Pacific)
You can also find additional support and ways to contact us at:
www.yosmart.com/support-and-service
Or scan the QR code:
Support Home Page
[ http://www.yosmart.com/support-and-service**](http://www.yosmart.com
/support-and-service)
**
Finally, if you have any feedback or suggestions for us, please email us at
feedback@yosmart.com
Thank you for trusting Yilin!
Eric Vanzo
Customer Experience Manager
15375 Barranca Parkway
Ste. J-107 | Irvine, California 92618
© 2023 YOSMART, INC IRVINE,
CALIFORNIA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>