DOOGEE R10 Rugged Tablet User Manual
- June 12, 2024
- DOOGEE
Table of Contents
DOOGEE R10 Rugged Tablet
Product Information
The R10 Series is a pad device that allows for calling and has a Nano card and TF card slot. It has a 3.5 headphone jack, power button, volume button, front camera, charging indicator, light sensor, main microphone, type-C port, secondary microphone, rear main camera, and flash. The device should be kept at least 15 cm away from medical implants or rhythm adjusters and should not be exposed to high temperatures or heat-generating equipment like sunlight, heaters, microwave ovens, ovens, or water heaters to avoid battery overheating.
Product Usage Instructions
-
Insert the SIM card into the device by pressing the card pin into the side hole. The card tray will pop up, and the card can be pulled out.
-
Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
-
Insert the card holder into the device in the direction of the arrow.
-
Do not expose the device and other batteries together with high temperatures or heat-generating equipment like sunlight, heaters, microwave ovens, ovens, or water heaters.
-
When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
-
Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage.
-
Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
-
Do not use chemical solvents or detergents to clean your pad.
Wipe the pad case with a soft cotton cloth dampened with water or a mild soap. -
If you encounter an abnormal image such as a crash during use, press and hold the power button for more than 12 seconds to force a restart.
-
When the charger is not in use, unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
OVERVIEW
- Speaker
- 5 Headphone Jack
- Speaker
- Power Button
- Volume Button
- Front Camera
- Charging Indicator
- Light Sensor
- Main Microphone
- Speaker
- SIM/TF Card
- Type-C Port
- Speaker
- Secondary Microphone
- Rear Main Camera
- Flash
How to insert the card
To make sure your pad be able to call, put the SIM card in the following order.
- Press the card pin into the side hole and then the card tray pops up and pull out it.
- Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
- With the pad facing up, insert the card holder into the pad in the direction of the arrow.
How to boot
Non-removable battery Press the power button for 3-5 seconds to boot
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS – video
- When writing a text message
- Select images, videos or other files you want to add, even
- You can take a new picture or video right away.
- Selecting or sending
Language switching settings
- Main menu–settings-system setting– language and input method
- Language and input method–language–language adding
- Select the language you need, the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the first one.
SAR
The maximum electromagnetic radiation absorption ratio (SAR) of this product
is ≤1. 6W/kg.
In line with the requirements of the national standard GB 21288-2007.
Safety
In order to ensure safely using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, battery or device.
- Use of an unapproved or incompatible power source,hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage,
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth.
- (Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting)
- It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequence energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However,there is no guarantee that
interference will not occur in a particular installation. if this equipmemt
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Scan the QR code for more function information
This user manual is for reference only.
The specific functions and product pictures may be slightly different from the
actual ones.Please prevail in kind.